Desktops - February 2007

2007-02-13 21:45:57 · 17 answers · asked by Anonymous

2007-02-13 21:44:20 · 9 answers · asked by Anonymous

I am using Windows XP on Packard Bell and when I purchased the computer I created a Master CD per interactive instructions. I now can install the CD when my computer starts and choose to remove and reinstall Windows XP and programs or just Windows XP. I have done both these things but my computer still retains a lot of data (music files, old word documents, programs)

Is there a more complete restore I can do to erase all data and reinstall? If so I need instruction on how I do this?

Further Information: When I install the Master CD on start up I have a screen with three choices. 1 is to reformat, 2 is advanced options (Install XP and programs or just XP) and 3 is to exit

2007-02-13 21:04:14 · 5 answers · asked by Anonymous

there is good list but I am not shure is is the same for desktop!!!

OLSO I FOUND 3 TYPES OF NVidia 7600.

7600,7600GS AND 7600GT.

WHAT IS THE DIFFERENCE BETWEN THEM AND IS 7600GS BETTER THAN 7600

2007-02-13 19:25:37 · 1 answers · asked by juretherebel 1

Does anyone know why my monitor sometimes works, then sometimes it doesn't? Sometimes I get the message "No signal Input or cable Disconnected". Other times it works just fine. It just periodically gets this error (as if it needs a coffee break). Sometimes it comes back within minutes, other times it could be hours. But it does come back? I have a Compaq Presario 5UVME2 Desktop running WindowsXP SP2. I don't even go near the computer. It just comes back on by iteself. Since it was temporarily up, I installed the latest ROMpaq and Firmware. That didn't make any difference though. Its down again. Its very temperamental. I've tried a different monitor, different graphics card, and several diferent sticks of PC100 Ram, different power cord, cleaned out the dust, etc. How would I test the mobo to see if that's the problem?

2007-02-13 18:44:09 · 8 answers · asked by maggies_etc 2

I have a custom built alienware full tower with twelve fans,six fans turnable.The way it is config is one on the side,one on the top,two in the front and two in the back.What would be the best way to make the most of my airflow?

2007-02-13 17:49:44 · 2 answers · asked by warpigs 3

2007-02-13 17:01:46 · 2 answers · asked by shawnna59 1

2007-02-13 16:51:58 · 9 answers · asked by shawnna59 1

My computer is slow. It take long time in booting, shutdown and open a programme.
System detail: Microsoft Windows XP
Media Centre Edition
Version 2002
Service pack 2
HP Pavilion, Pentium(R) 4 CPU 3.06 GHz, 248 MB of RAM

2007-02-13 16:42:52 · 22 answers · asked by kai 2

it only has the 64 onboard graphics

2007-02-13 16:22:25 · 4 answers · asked by Anonymous

AMD X2 3800+
Intel Core 2 Duo E4300

2007-02-13 16:18:55 · 6 answers · asked by U can't B like me 5

2007-02-13 16:15:31 · 6 answers · asked by jain_josh 1

unit says i have two floppydrives also will not boot up unless xp disk is in drive.the gateway flash software is useless

2007-02-13 16:14:54 · 2 answers · asked by parker_cooper2000 1

Is this laptop a good desktop replacment? I will mostly use it foe entertainment, mp3's and school.

2007-02-13 16:11:31 · 6 answers · asked by Lakers24 2

i need to know how i can find out what kind of ram for my pc i need to buy i have 256 would like to double

2007-02-13 15:47:10 · 5 answers · asked by hazeallday 3

Please Read:

I am trying to reformat my computer. I have a Dell copy of Windows XP Home that came with my computer. Everything went well, till I tried to delete my C: NTFS partition through the Windows setup. It told me that the setup files were still on the drive and the partition couldn't be deleted.

I tried to use an approach I used on my laptop several days ago, where I installed Win 2000 through a floppy drive and then upgraded to XP. This process didn't use my C: drive for setup files. The only problem is, my desktop that I am now formatting doesn't have a floppy disk drive.

Is there anyway to safely remove my windows partition, or somehow redirect these setup files to another drive?

2007-02-13 14:03:30 · 2 answers · asked by T Buhler 2

2007-02-13 13:15:31 · 7 answers · asked by Saundra H 1

I DO NOT HAVE SPYWARE/ADWARE OR VIRUSES, I DO NOT NEED TO RUN DISK CLEANUP OR DEFRAGMENT!

I want my computer to lag instead of totally freeze up. It freezes when I run too many programs. It's also when my processor reaches 100%, it freezes. How do I just make it lag instead of totally freeze?

2007-02-13 12:40:32 · 11 answers · asked by wishafur 2

ok i did format the disk (not a quickie)didnt run a scandisk tho & reinstalled samethin & with the acer when i take the mem out the comp move so slow like it was made in the 80'S i tryed to go to acer.com but i cant find my model i have the acer aspire t180 & the processor is not the 3800+ duel-core in sys. it say 4200+ duel

2007-02-13 12:16:40 · 2 answers · asked by bigflame 1

Apple or MIcrosoft? Steve Jobs or Bill Gates? And WHY?

2007-02-13 11:13:45 · 8 answers · asked by Anonymous

2007-02-13 11:11:12 · 7 answers · asked by Anonymous

i have a hard drive with windows vista 32 installed on it, but i ordered and installed a new hard drive on which i want to install windows vista 64 (my pc supports 64-bit, so i don't have to worry about that)... when i insert the WV64 dvd to install, after clicking "next" a couple of times, a screen comes up where i have to specify the partition i want to install windows vista 64 on, but it doesn't see any partition at all, unless i connect my old hard drive. i want to know how to make windows vista recognize my new hard drive. any help?

2007-02-13 11:02:04 · 4 answers · asked by [Unknown] 2

2007-02-13 10:50:30 · 8 answers · asked by Anonymous

I'm planning on building my first computer in a few months. A friend of mine did it a few years ago, and the process doesn't look very hard, so I'm going to try it myself, but I don't know whether to install the new windows or keep with the old in a handbuilt computer. I've heard it's not that great in old computers, and that it's great with computers that are bought new, with it installed. Does anyone know the pros and cons?

2007-02-13 09:20:42 · 11 answers · asked by Locke 1

motherboard is SIS 661FX

bus speed is 200 MHz

rated FSB is 800 MHz

will pc4000 be better than pc3200?

2007-02-13 09:13:43 · 4 answers · asked by Anonymous

E-Mac located in Miami Florida. Beach Ball wont stop spinning, tried everything except disk warrior.

2007-02-13 08:56:38 · 3 answers · asked by Sara 2

2007-02-13 08:56:12 · 20 answers · asked by Anonymous

2007-02-13 08:54:09 · 4 answers · asked by Mic80 1

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2900353&CatId=332

2007-02-13 08:51:24 · 5 answers · asked by BPL 2

When i press the power button the light doesn't turn on, the moniter doesn't recognize the computer, but i can hear the battery on and my external devices are on (i.e. wireless internet connection, mp3).

2007-02-13 08:50:19 · 9 answers · asked by Big Ken 2