Computer Networking - January 2007

By chaining i mean T1 router>Firewall>Switch>others

I want to be able to have the t1 router and firewall connect directly to the switch but I really don't know how to come about getting the clients to request everything through the firewall and then make the firewall hop to the t1 router.

2007-01-10 03:34:25 · 2 answers · asked by daymnimlost 3

i don't want to put a tv next to my computer.

2007-01-10 03:14:33 · 6 answers · asked by mackwinker 1

2007-01-10 02:11:42 · 2 answers · asked by Isaac 1

Okay I want to know if I have a wireless modem, does it have to be connected to a desktop in order for my laptop to work wireless? Also, will I have the same DSL speed as when I am connected with the ethernet cable?

2007-01-10 02:00:50 · 2 answers · asked by dianaShopatHome.com 1

2007-01-10 01:57:15 · 1 answers · asked by Me 2

I hope someone can help me. I have ADSL broadband which works perfectly when connectedf to my Desktop or Laptop via ethernet. However I have bought a new Belkin ADSL Wireless Modem. I connect my Desktop to my new modem via ethernet and hope to pick up the wireless signal via my built in card in my laptop. My desktop does not have a pci card. Do I need one for it? or will the connection via the ethernet be enough to connect to the internet or will I have to install a USB adapter also?
Also when I do this my laptop sees the network connects to it fine but cant display webpage.
I have disabled all my firewalls and virus stuff and checked my TCP/IP protocol is set to Obtain IP address automatically. Please help! Where am I going wrong???

2007-01-10 01:24:23 · 2 answers · asked by jason m 1

2007-01-10 01:22:18 · 3 answers · asked by Sapphire 1

I have a desktop and laptop. I want to access files on the desktop from the laptop and vice-versa. The desktop and laptop has wireless capability. I have purchased a wireless router.
I have conected the router to the desktop and ran network wizzard setting up workgroup, designating the sharing files. I have done the same on the laptop. Now when looking for workgroup on each of the computers, I get this message: (workgroup Name) not accessible. You might not have permission to use this network. What am I doing wrong?

2007-01-10 01:09:36 · 4 answers · asked by lotsof? 1

...and how do i do it?

2007-01-10 01:01:33 · 2 answers · asked by tn5421 3

how do i share adsl bandwidth equally with speedtouch 530?

2007-01-10 00:51:54 · 2 answers · asked by TA B 1

we're using the whiteorange-orange-whiteblue-blue-whitegreen-green-whitebrown-brown arrangement. until we found out that it should be like this.. whiteorange-orange-whitegreen-blue-whiteblue-green-whitebrown-brown! although our arrangement works, what maybe the effect of this wrong arrangement? does it affect the download and upload speed of our internet connection? because we noticed that there is a big difference between our download(370kbps) and upload(124kbps) speed.

2007-01-10 00:41:54 · 5 answers · asked by oilegor718 1

The setup here is a adsl conection with a very simple modem with only the usb and phone line connected to it.. it's sagem fast 800. Woud any of the linksys usb wireless routers you get in the states work with this particular modem and adsl connection?

2007-01-09 23:57:44 · 1 answers · asked by Novaman 3

which unified messaging system has the edge for IP communications, Cisco Call Manager 5.0 vs Alcatel OmniPCX Enterprise

2007-01-09 22:46:31 · 2 answers · asked by Marlon B 1

Please explain how to do that

2007-01-09 22:00:15 · 8 answers · asked by jaspal 2

since i had bt home hub cf4c in august.i have had nothing but problems with it.loosing connections allthe time.i have move it nearer to the router.but nothing works.i also am having big problems with belkin wireless.it crashs all the time.and maes the computer mess up.and can not get any acess to the internet.dose any one know how i can contact bt broadband-belkin direct.try the number for belkin on there cd but the line keeps going dead.or it is already dead.i am at my wit end with both of then.so any information.would be greatful.has cost me a lot of money.taking the computer.back and forth to the computer shop.and i dont have the money i am out of work because of chornic illness.i have worte to both of then but still waiting a reply

2007-01-09 21:53:59 · 2 answers · asked by peter o 5

ok i just got my motherboard (680i) and it has 2 LAN ports , i dont have a router so could i connect my modem (dsl/cable) to my computer then connect my second computer to the one i got now and share internet ? is there any other ways of having both computers having internet ?

2007-01-09 21:30:17 · 2 answers · asked by Lance L 1

2007-01-09 20:43:10 · 3 answers · asked by rasiganbalu 1

2007-01-09 18:27:28 · 7 answers · asked by sameer m 2

2007-01-09 18:12:10 · 6 answers · asked by Anonymous

I Know There Is A Way to send messages over a network using command prompt but i don`t know exactly what to type in please can somone tell me what to type in

2007-01-09 16:43:56 · 3 answers · asked by Anonymous

2007-01-09 15:46:18 · 3 answers · asked by pitong 1

I just purchased a laptop and I want to use it wireless from time to time in free wireless internet locations, such as coffee shops, etc. My question is....do I need any special equipment to do that? I know for paid wireless you need a modem/router....but just wondering if anything extra is needed for the free wireless I mentioned.

Thank-you, Amber

2007-01-09 15:35:23 · 6 answers · asked by Amber 1

2007-01-09 15:28:41 · 11 answers · asked by Anonymous

What command im going to do to check that i did a simple network..pls help me ..

2007-01-09 15:13:05 · 5 answers · asked by pitong 1

I got a 2wire modem for free. so how do i install it? Do I need a CD to install it? or Can I use my sbc yahoo CD?

2007-01-09 15:03:35 · 2 answers · asked by xddsd 1

please dont say "burn cds".
The desktop has windows xp home
and the laptop has windows xp media center...I dont think it can make a network, but im not sure about it.

2007-01-09 14:06:57 · 29 answers · asked by ricardo.villela 1

2007-01-09 13:02:15 · 3 answers · asked by Anonymous

I have a 2wire modem from Att Yahoo how do i know if i am using toomuch of my bandwith? Do I get charged more? What is my bandwith limit for a month? PLZ help

2007-01-09 12:48:56 · 4 answers · asked by George 3

I am looking for a method to connect to another computer remotely over a broadband connection for my consulting business so I can diagnose & correct problems without needing to be on-site. I have a few requirements:

1.) The method must be secure.
It can be secure either by a form of password, encryption, or by having the user remove the software from their computer when not in use.

2.) Interactivity.
I need to have full (temporary) admin rights to their computer or as close as to this as I can. It would be helpful if the user and I each had separate cursors we could use to make changes to the system, or we could take turns using the same cursor.

3.) Free or low cost licensing.
I would prefer free methods, but if I do need to purchase software to do this, I would look at licensing plans.

Please provide links to the software and/or methods of doing this. I would need Windows 2K, XP, and Media Center OS compatibilities.

2007-01-09 12:10:35 · 5 answers · asked by rlucas7298 2

I've wrongfully type the workgroup at my LAN at the office. How can i change the workgroup (since the workgroup was set in the middle of Windows XP installation process?). The result is i can't connect to the other computer at network connection, coz I'm working on different workgroup. I had to ask this here, cause there's no computer assistance or some kind of it right now. Thanks a lot

2007-01-09 12:07:44 · 5 answers · asked by Stanley R 2