Cars & Transportation - 3 March 2007

I am new to this and i want to know if this is a good system
4 by 6's - Kicker DS46
6 by 9's - Kicker KS693 KS-Series 05KS693
Subs - Kicker 05C124
Amp - Power Acoustik OV2-400 W
Deck - Kenwood KDC-MP2032

I am planning on running my speakers through my deck and my subs through the amp of course. If this is a good setup tell me please or if you have any suggestions thatd be great. This costs about $414, Is that expensive? once again i am very new to this.

2007-03-03 14:20:16 · 5 answers · asked by Levi K 2 in Car Audio

I don't know anyone who owns one that I could learn on, and I don't want to buy one until I'm sure that I'm comfortable riding... Any suggestions?

2007-03-03 14:19:59 · 10 answers · asked by nfogey_1981 3 in Motorcycles

You are the officer in charge of the 1st due Engine company operating on the scene of an MVA on the interstate. The state police officer tells you to "move the Engine because you are taking up 2 lanes." A woman is trapped in a car, and it looks like an extended extrication. All personnel are working....however, he wants it moved now! How would you address this problem? What would you say to him?

2007-03-03 14:18:18 · 9 answers · asked by engulance 2 in Safety

I have heard that you can not run a new diesel on veggi oil. something about the amount of pressure in the injectors. Does anybody have a good reason why you can or cant? Only answer if you know for sure please.

2007-03-03 14:18:18 · 1 answers · asked by Anonymous in Maintenance & Repairs

I sold a motorcycle as a private seller. The bike worked fine when I had it. I sold it thinking it was as-is. I got a call 3 hours later saying it broke down on the side of the road. He wants me to pay for the repairs. I agreed to go and look at it, and to try to repair it. Am I responsible for this? Please help!
P.S it is in Ca

2007-03-03 14:17:04 · 6 answers · asked by mandy 1 in Buying & Selling

I am thinking about doing a straight pipe from the turbo back on my 07 duramax and need to know if it will effect the motor in any way? I have always been told that the less backpressure on a turbo motor the better.

2007-03-03 14:13:25 · 5 answers · asked by Anonymous in GMC

I'm building an Electric Vehicle, and am torn between using the Gerrman PMG-132 permanent magnet motor -vs- a Series DC motor of the same Horsepower. I need a maximum of 3000rpm under load.

2007-03-03 14:10:53 · 3 answers · asked by EVbuilder 2 in Other - Cars & Transportation

My car, a 1995 300zx.The noise is a squeek, squeek, squeek, sound as i back up & only when i back up.The noise is comming from the under and twards the back.I had the breaks checked but just as i suspected it wasnt that.Driving forward it runs like a bute with no noise or vibration.It started about two weeks ago.When driving in reverse the noise is present weather the car is hot or cold. The noise level is allways the same. The squeek squeek sound picks up speed as the car piks up speed.If anyone knows what this might be,is it fixable without replacing something? Oh,the noise that i am hearing is'nt getting louder, its been the same from the start.What could this be? and what should i do? All your thouts and or ideas will be greatly apreciated. THANKS TM

2007-03-03 14:10:46 · 8 answers · asked by BUMPER 1 in Maintenance & Repairs

when you look up your tickets on line it has beside it Status then under neith it has CLOSED, DELINQUENT, SCHOOL, or OPEN.

2007-03-03 14:09:11 · 5 answers · asked by twich_1116 1 in Insurance & Registration

I drive a Gt and i honestly didnt know that there was something called synthetic oil. I thought Oil was oil. So anyways, shoul i be using synthetic oil or will regular oil do? I like keeping my car in good conditions and since im planning on keeping it for a long time i want to keep it in good standing. So what will synthetic oil do for my car? Will it make it run better? Anything that can help me out is appreciated...

2007-03-03 14:09:03 · 7 answers · asked by tropics 2 in Maintenance & Repairs

2007-03-03 14:08:14 · 10 answers · asked by Allison T 2 in Ford

2007-03-03 14:03:55 · 16 answers · asked by bjb91950 1 in Maintenance & Repairs

i have a cherokee i want to lift it but my budget is tight i heard you get 2 inches in front if you use grand cherokee coil springs the rear you get 2 inches by cutting out long leaf off another set of springs like a add a leaf should i fabricate shackles use blocks any help i can use for a budget boost thanks

2007-03-03 14:02:59 · 3 answers · asked by jeepin 1 in Maintenance & Repairs

I'm getting a 1980 Nissan Pathfinder with approx 229,000 miles. No big problems noted. How long can I expect the engine to "live"? I know the current owners (family). They have well maintained the vehicle and cared well for it. I just want to know what to expect. Thanks!

2007-03-03 14:01:27 · 12 answers · asked by CoBlu 1 in Nissan

I put a new drum and axle nut on it and it still happens. It is not missing any parts. The splines on the previous drum were worn, so it had a little play on the spindle, even when tightened as much as possible. I also put a new cone washer and axle nut on as well and tightened as much as it allows(it only tightens so far, even with a torque wrench, because the cotter pin goes through). The splines on the spindle are good and the new drum went on perfectly with no play, but now after about 20 miles the drum is loose on the spindle again. What is wrong and where should I take it?

2007-03-03 14:00:31 · 3 answers · asked by Iamsomeone 1 in Maintenance & Repairs

2007-03-03 13:55:57 · 4 answers · asked by bo 1 in Buying & Selling

t crank up it has power all electricals work is there something in the clutch thats keeping it from starting up?

2007-03-03 13:55:11 · 1 answers · asked by jonny g 1 in Motorcycles

I've replaced the EGR valve, spark plugs and wires

2007-03-03 13:54:29 · 4 answers · asked by Derrick P 1 in Maintenance & Repairs

2007-03-03 13:53:09 · 2 answers · asked by CJ 1 in Mitsubishi

I've requested the credit bureaus to remove/fix parts of my credit report so that hopefully my fico will go up. I want to get my fico as high as i can before applying for a car loan/lease. I usually put less than10k miles on my vehicles per year. I own a 2001 toyota mr2 with less than 40k miles. I plan on selling it and putting the money down on a purchase if i don't qualify for a lease.

2007-03-03 13:53:01 · 2 answers · asked by SUVCURIOUS 2 in Buying & Selling

my car had a problem . the ignition switch is burned and the connector burn up too , the question is how to change or repair that connector because the wires are damaged also .
my car is NB 2000.
thank you for all of your answers

2007-03-03 13:52:02 · 2 answers · asked by learning 2 in Volkswagen

i am taking my checkride on monday, and i want to know what are some of the things the examiner will ask and what i should know???

2007-03-03 13:51:57 · 8 answers · asked by Anonymous in Aircraft

I have a 1989 5.0 Mustang that I had to pull the distributor to replace the Ignition Control Module. I was careful to mark the distributor's postion however I forgot to mark the rotor position within the distributor. Now I'm stuck. Can anyone give me a clue as to how to align the engine with the distributor enough to get it running so that I can fine tune the timing by twisting the distributor? Thanks.

2007-03-03 13:50:57 · 9 answers · asked by mrlexington 2 in Maintenance & Repairs

?

2007-03-03 13:49:49 · 9 answers · asked by Haley 3 in Maintenance & Repairs

2007-03-03 13:47:04 · 7 answers · asked by Anonymous in Motorcycles

My pulley split and fell off. Or it fell off and was cut in half by the fan. In any case I need to replace it. Is it pressed on only? I don't see a bolt hole in the end of the shaft. What do I need to press another one back on? The pump seems to spin ok and I'd rather not replace the whole thing.

Thanks in advance

2007-03-03 13:45:24 · 7 answers · asked by Anonymous in Ford

My car has 150,000miles and my transmission went out. Has this happened to anyone and do they have a recall on it?

2007-03-03 13:44:59 · 6 answers · asked by g-thugga 1 in Honda

I'm planning to buy 64 Mustang convertible. But I'm worried for all that money to go down the drain by someone jacking it. So I was planning to install Onstar for that, and other reasons. But then I'm not sure if that can be done. AND if so, how much would installation be?

2007-03-03 13:44:48 · 1 answers · asked by Hannah T 1 in Safety

2001 Ford Windstar automatic, When you put gearshift in any position the van will only go in reverse.

2007-03-03 13:44:47 · 2 answers · asked by Anonymous in Ford

Someone told me that an upholstery shop can maybe make one. Any ideas?

2007-03-03 13:43:49 · 5 answers · asked by Jeanne G 2 in Ford