my car had a problem . the ignition switch is burned and the connector burn up too , the question is how to change or repair that connector because the wires are damaged also .
my car is NB 2000.
thank you for all of your answers
2007-03-03 13:52:02 · 2 answers · asked by learning 2 in Cars & Transportation ➔ Car Makes ➔ Volkswagen
I would first try and find the car in an auto salvage yard and see if it has the ignition in place. Disconnect that one with all the wires and do a swap. For the key, you will have to take the tumbler (where the key goes in) to a locksmith with your key and he can reconfigure it to match your key.
That is the easiest and cheapest. You can buy that mess from the dealer(special order probably) and it won't be cheap and you have to replace the connections one by one(from old to new). Do make sure the battery is not hooked up in the car in any way while you are doing this.
It is what the mechanic has to do as he knows no more than that.
2007-03-04 08:01:35 · answer #1 · answered by ButwhatdoIno? 6 · 0⤊ 0⤋
look at your owners guide it should give some tips on how to repair it if it don't then take your car to your mechanic and have them to fix it for
2007-03-03 21:59:16 · answer #2 · answered by geostrom b 4 · 0⤊ 0⤋