Desktops - December 2006

Intel (R)
Pentium (R) 4 CPU 2.80GHz
2.80 GHz, 992 MB of RAM

2006-12-11 03:00:19 · 8 answers · asked by blue-in-groove 6

Is it because of my mother board connection cuse I have formatted my hard-drive on my friends's pc but it shows the same error

2006-12-11 02:29:48 · 12 answers · asked by Anonymous

FROM cyberLink PowerDVD System.

2006-12-11 02:09:27 · 6 answers · asked by KEVIN BRYAN 1

2006-12-11 02:03:02 · 2 answers · asked by noel 1

you dont know how much its help me

2006-12-11 00:38:51 · 5 answers · asked by diwakar p 1

i try delete but their is not result

2006-12-11 00:20:24 · 11 answers · asked by diwakar p 1

I have tried putting them on disc, but it just keeps telling me to load a disc when there is already one there. i have tried a floppy disc but that tells me that it is not formatted, although on the outside it says it is formatted. I dont want to lose them as they are holiday photographs, would love some advice if possible.

2006-12-10 23:50:49 · 17 answers · asked by ANNE C 1

2006-12-10 22:50:12 · 4 answers · asked by Anonymous

if I get a compatible motherboard with 800 MHz FSB, which RAM should I get? 667 MHz, 800 Mhz, or 1066 HMz ? Is there any point getting RAM higher than 800 MHz ?

2006-12-10 22:38:19 · 4 answers · asked by Sporadic 4

2006-12-10 20:13:20 · 6 answers · asked by friend207 2

2006-12-10 20:08:54 · 8 answers · asked by AnGeLo 1

I've heard of, and personally experience, 'memory inflation'. That is, closing programs and windows doesn't seem to make it completely give up it's memory load. A little of it here and there and after like 30 hours of computer use you have double the slowness while running the exact same things. Eventually **** will break and something will crash. Too bad, now you must restart you computer.

Now if this is true then getting a memory upgrade will only postpone the inevitable right?, that is the computer will run out of memory even if you keep the number of programs down to a reasonable level.

This is not just my imagination, I've restarted it at 430 MB, done stuff with it, used it, gone on the Internet, run programs etc and then two weeks later it's 900 MB with absolutely nothing on. Completely blank taskbar.

2006-12-10 18:59:06 · 8 answers · asked by anonymous 4

I work for a small ad agency in South Africa & my boss tasked me to do some research on hardware & software. im getting different opinions about what hardware is best for design applications (Inc. 3D) & i need some advice on what to do. Currently our studio is runnung on cloned PC's which are letting us down occasionally. please advise me so I can make an informed decision. Thanks Guys!

2006-12-10 18:45:30 · 2 answers · asked by BIG SHO 1

I have an HP Pavilion a705w...and it keeps restarting without warning. It does it every half hour or so. What could be the problem and how can I fix it?

2006-12-10 16:16:00 · 10 answers · asked by ? 5

i had used to dwnld stuff from net so used the cpu whole night & switched

off computer in morning
and next day i wanted to do the same after
1)using 2 hrs cpu got over heated and released foul kindof gas,im really

worried can anybody tell me what is that?? is it cooling for cpu then do i

have to replace that gas is it risky now??
2)how to maintain cpu's w/o getting heated up..???

plz help
pllz help me
plz reply to sanny123_99@yahoo.com

2006-12-10 15:24:40 · 6 answers · asked by sanny123_99 1

I removed the main partition on a hp 753n computer and reinstalled windows xp. when i reboot, i get a boot disk error and i have to use the windows source cd to boot the computer. is there any way to fix this? Also, i still have the hp recovery partition, but the hp recovery application is not on my hard drive to boot the recovery partition. How do i access the recovery partition so i can start over with all the original factory settings and applications? If i do this, will it also fix my boot disk error? Or could anyone help me out with the hp pavilion 753n recovery cd's? I have tried buying so called "recovery cd's" only to get ripped off.

2006-12-10 15:19:20 · 6 answers · asked by gamemaster 1

I'm almost finished installing a motherboard, but I'm having trouble figuring out the proper way to install the small connectors for things such as the power button, hdd light, reset button, etc. I can read the blueprints in the manual to find "where" to plug them into, but I can't figure out if I'm plugging them in the correct way, or if they are backwards. I can see that the little plastic pieces usually have a little triangle indicator on one side, but I don't know what it means.

In the manual it referrs to the pins in terms like "high reference pull-up" or "low reference pull-down".

Or in the example of the Hdd light, It lists one of the pins as "hard disk LED pull-up" with the signal going to it as HD_LED_P, and the other pin is listed as "Hard disk active LED" with a HD_LED_N signal going to it. The little plastic connector has a triangle on one side, but how do I know which direction to plug it in?

I'd like to know what the triangle indicates, and the other terms too.

2006-12-10 15:12:44 · 5 answers · asked by Rockstar from another dimension 1

Everything else that has audio plays the audio except DVDs. Ive tried playing them in Windows Media Player and Windows Media Center, i also made sure the mute was not on on both of them. I also checked the audio settings and made sure everything was turned all the way up. Any advice?

2006-12-10 15:06:40 · 3 answers · asked by aggresivedriver0 2

i want to know this or either what wireless router should i buy to work with my dell dimension 3000 pentium 4 pc.i need a wirelss router for my videos games.please help

2006-12-10 15:04:49 · 4 answers · asked by Anonymous

Building a new machine for high graphics and the jury seems to still be out on the advantages of Sli as opposed to just spending the extra $ on a better single card. Seems to be no common concensus on the matter. Your opinion?

2006-12-10 15:02:44 · 3 answers · asked by Chris the all knowing one 2

Does any one know what is a good PC for games. Like The Sims 2 and other games. That would run very good and would last long. and you can install a lot of games. To were it does not run very slow or pause. DeskTops only.

2006-12-10 14:50:33 · 6 answers · asked by Anonymous

i want to erase everything !! and i dont have a disk to do it !!

2006-12-10 14:45:45 · 5 answers · asked by strange 2

My windows crashed yesturday, and i had to reformat. Windows would boot, but once it booted fully i couldn't do anything and had a constant hour glass symbol. Tried to restore, but the same thing was happening even if i went back 2 months. Now, when i start it up, its extremely quiet. Usually i can hear it, kind of sounds like a mini jet engine, but nothing now. I looked in the back and both fans are still running. Everything seems fine, just..............doesn't sound normal, if you understand what i mean, lol. What could be the problem?

2006-12-10 14:29:47 · 3 answers · asked by .·:**:·. Chrissy.·:**:·. 3

the computer was made in 2003, it is a Gateway 510 series, and I have an Nvidia 5200 FX graphics card.

2006-12-10 14:17:36 · 6 answers · asked by -+=#13#=+- 2

2006-12-10 13:59:49 · 3 answers · asked by sarah h 2

i have a dell deminsion l1000r and i have accidently locked up the hard-drive, is there a reset option or a way to reset or delete it (i cannot get into the computer at all) or do i have to replace it?

2006-12-10 13:57:03 · 6 answers · asked by topher4193 2

2006-12-10 13:18:54 · 12 answers · asked by Anonymous

I have to finish a term paper, but I really need to defragment my computer. Do I have to stop writing to do so?

2006-12-10 12:48:54 · 11 answers · asked by Anonymous

I have recently replaced my motherboard and PSU but the problem is that nothing is happening when i turn it on just the power LED light is coming on but in standby, but no noise from the fan or nothing i have double checked the cables to the motherboard but could it be with the Hard Drive cable? Please Help:D

2006-12-10 12:07:36 · 5 answers · asked by Anonymous

HP pavilion 8650c, celeron 550mHz, about 6yrs old

2006-12-10 09:57:56 · 4 answers · asked by SCHMITZ E 1