Maintenance & Repairs - March 2007

2007-03-17 06:30:50 · 2 answers · asked by Anonymous

when i am in park my engine revs from 1000 to 1500 rpms. and it makes a loud noise when it shifts gears sometimes. what is the problem and how can i fix it

2007-03-17 06:29:45 · 4 answers · asked by clueless 1

2007-03-17 06:26:00 · 3 answers · asked by fritofilly 1

Will there be a difference in preformance (accelration)?

2007-03-17 06:20:54 · 6 answers · asked by Hussain T 1

will a simple cup of water casue rough running or stalling or does it take more water to cause my problems? very curious.
thanks

2007-03-17 06:08:04 · 0 answers · asked by lucky 2

I have a 1992 Oldsmobile 98 and an anti-lock brake system. My brakes are going down to the floor and the pads are fine. I have brake fluid and my lines have been bled....I know there is no leak so could it be that my brake lines have air in them and if not what else could it be? All answers are appreciated....Thanks!!!

2007-03-17 05:59:56 · 5 answers · asked by JuiCii 2

we have checked the antifreeze and we do not have a leak we cleaned the level control that is on the radiator, we was told that the coolant sensor that is in the motor and has one single pigtail wire that plugs into a connector would not cause the light to come on and stay on?

2007-03-17 05:43:52 · 3 answers · asked by mary u 1

It would be a big help if anyone could tell me how to reset the ECU myself because i have recently done work to it myself but i need to reset ecu to clear all codes to

2007-03-17 05:41:26 · 6 answers · asked by jay_mcg2000 1

2007-03-17 05:41:08 · 3 answers · asked by ????????? 2

2007-03-17 05:38:37 · 3 answers · asked by Anonymous

I slid on the ice and went into the other lane and hit a van head on, then another car hit me from behind. My car had to be towed and the back wheel is messed up so it is not drivable. I have a 2006 mercury mariner and the frame might be dented. Does this mean my car will have problems forever? The front isn't badly damaged and that and the bumper will be replaced, but since you can't replace the frame how do they fix that? They towed it to a place thats closed until tuesday so i'm dying to know what is going to happen.

2007-03-17 05:24:43 · 4 answers · asked by Anonymous

replacing the tranny on my 97 suzuki swift and cant find a book for it what is the best way to remove the drive axles with out damaging them?

2007-03-17 05:24:00 · 5 answers · asked by dover157 1

by using lacquer which is similar to my paint.

2007-03-17 05:23:59 · 3 answers · asked by ravi m 1

can i change it/mod it to a waste-spark type twin coil/quad coil (Distributorless Ignition system).. or individual coil system? how its done?

2007-03-17 05:21:43 · 1 answers · asked by theblues79 3

My catalytic converter on my dodge dakota is clogged. I called my mechanic and he cant work on it until monday, but I have some driving i need to do today and tomorrow and don't have another car. Will my car be ok to drive for a little while if I remove the first o2 sensor so air can escape there?

2007-03-17 05:18:08 · 7 answers · asked by honduraz10 2

2007-03-17 04:50:23 · 3 answers · asked by big dee 1

i was driving down the road and heard a knock and my truck quit pulling, now its like its in neutral, i have no forward or reverse,b ut if i put it in 4wd it works perfect, can someone tell if something may have came loose or whats going on?

2007-03-17 04:46:32 · 5 answers · asked by Anonymous

My mother has a 2004 Kia Spectra. Lately it has been making weird noises that appear to be coming from the passenger side front wheel. The sound is kind of a soft clunking. She believes it could be the strut. Steering is a tiny bit off, it does not want to turn as easy as it once did. What do I do? Could it be the strut or something else.

2007-03-17 04:45:22 · 6 answers · asked by Anonymous

dose any one know if a newer model rearend (like a 2000? yearmodel) would enter change with out a lot trouble i want to
do this because i would have disk brakes on the back or has any one ever tryed to swap the body of a 1987 to a newer frame this is a pickup shortwheel base stepside im fixing up
any info will be helpfull thanks

2007-03-17 04:41:47 · 4 answers · asked by runninglate 2

Okay, when I put the brakes on to stop, I can hear this noise in the back, kinda near the trunk area. It's kinda a mixture of a squeaky noise and a loud thud. Can anyone help me out with this and tell me what the problem is and how to fix it?

Thanks.

2007-03-17 04:33:32 · 4 answers · asked by Celes Chere 4

I have a patched up1987 cabriolet, I have been chasing vacuum leaks. Does anyoneone know if using a slightly different size hose for a vacuum leak affects anything? I've got it running, but nows its missfiring.

2007-03-17 04:31:29 · 3 answers · asked by tonka 2

2007-03-17 04:19:09 · 1 answers · asked by Ronnie C 1

it keeps overheating and every time and i cant turn it on they charge me 2500$ to fix it, how much is a used 318i 1994 bmw engine cost? and is there any good mechanic place that could fix it for cheap thank you!

2007-03-17 04:19:03 · 3 answers · asked by Anonymous

I have a 91 cutlass supreme automatic center council shifter it slips out of gear when you come to a stop. it does not do it all the time. if you shift to neutral and back to drive it goes into gear again the transmission shifts perfectly what is causing this.

2007-03-17 03:50:15 · 5 answers · asked by Paul E 1

It drives perfectly but the idle speed is low, it also'hunts' when left to idle. The revs go from nect to nothing up to 1000 ish. It cuts out too.

2007-03-17 03:46:55 · 5 answers · asked by t88ny 1

My low mileage (46K) Jaguar V12 suddenly stopped changing up from 1st gear (it's an automatic - I think a GM300 box as used in Cadilacs of the time). Can anyone suggest why this might be? athe auto-transmission fluid level is fine. I'm very worried about it as the car is much bigger than my wallet, if you know what I mean !

I'm not sure if it could be related but it stopped changing gear after I opened the bonet and flexed a rubber bellows thing at the top of the engine, and also manually clicked a micro-switch which is attached to the throttle cable, again at the top of the engine. Slapped wrist for tampering!

PLEASE HELP !!!!!!V!!!!!!

2007-03-17 03:34:52 · 7 answers · asked by Ad Cas 2

a person said you must remove the front fender well. is this true?

2007-03-17 03:20:31 · 6 answers · asked by booboo 1

I have a car with a 5 speed manual transmission but I wanna change the engine. SO the other engine is the same year and same type of car but it have a automatic transmission on it. So my quetion is can I take the auto transmission out and joint that motor with my manual trans

2007-03-17 03:16:49 · 10 answers · asked by cubanboy 1

I drive a 1991 Ford F-150 XLT Lariat. It has a 5.8 liter 351 Windsor and an automatic 4 speed transmision with overdrive. Recently I have noticed when I shift into reverse, before letting off the brake, it "kicks" real hard into reverse. This truck is a daily driver and this occurs about once every two days or so. What could be wrong? How could I fix this?

2007-03-17 03:02:02 · 6 answers · asked by Anonymous

I need a power window regulator for my 2001 ford focus, left front window. I have searched online and everytime I get close, I see that Focus is not on the list. WHY??? I need it replaced badly, and I don't want to pay the 100's of $$$ again to have it done at a Ford dealership. I have found window motors, but not the regulator for a Focus.

Help! I need my power window because of my job :(

2007-03-17 02:55:39 · 4 answers · asked by D B 1