Other - Hardware - March 2007

2007-03-07 06:22:44 · 5 answers · asked by Anonymous

Ok, I am curious about testing my PSU, to ensure I have enough power. I am currently 350W, but I am running a PCI-E video card. If I took the PSU from another computer, jumped the green and black MB cables to turn it on, can I run my HDD, CD, etc. off of it and dedicate the original PSU to the MB to test my power needs?

2007-03-07 06:11:41 · 2 answers · asked by Anonymous

When I start the board with ONLY a 2.4 GHz Celeron, and one 256MB SMT (smart modular technologies) RAM I get a blinking Power LED, and nothing else.


when I put the same 2.4 GHz CPU and RAM into my other Biostar P4M80-M4 it starts up for just a second, fans spin, then shuts off. And I have to restart the PSU to get it to do that again.

I tried using different RAM, like some Kingston 512 cards and such, and 2 different PSUs (both of which succesfully power 2 other PCs) but I can't get this thing to POST. I've also reset the BIOS on both boards.

I don't know what else to do. I NEED one of them to work. Could it be the CPU? should I try it with another 478 P4? on that note, anyone have an old one they wouldn't mind sending my way for a few bucks?

2007-03-07 06:06:35 · 2 answers · asked by Anonymous

2007-03-07 05:29:19 · 4 answers · asked by lavonte h 1

2007-03-07 05:03:51 · 9 answers · asked by Z, unnecessary letter 5

I want to purchase a Memorex Disk Drive and the system requirements are Pentium 166 MMX or higher. I am unfamiliar with MMX. My system has Intel Pentium 448 MHz. I need to know if the drive will work with my system. Is MMX the same as MHz?

2007-03-07 04:45:25 · 2 answers · asked by Kay B 1

i belive someone is useing my pc. i need to set some thing up to check time to time and see what and when anything has been typed in.

2007-03-07 04:43:36 · 5 answers · asked by waljac6108 5

nothin

2007-03-07 04:41:06 · 3 answers · asked by anish r 1

I bought a LGA 775 Dual core intel processor and LGA 775 Foxconn ddr1 mobo w/ intergreted graphics, it turns on fine but i don't get no picture nothing at all. Whats Worng?

2007-03-07 04:40:05 · 1 answers · asked by ar3rocker 2

2007-03-07 04:39:44 · 1 answers · asked by jayshree 1

had this laptop for 1 week now.twice i have had to do system restore in safe mode because i will get an error come up saying a usb attached to this computer has malfunctioned and cannot be recognised.- no usb devices are attached to laptop ! when this happens i lose my wireless connection. only way to sort it is doing system restore in safe mode. any suggestions?

2007-03-07 04:35:51 · 1 answers · asked by bmb 2

2007-03-07 04:05:36 · 3 answers · asked by lone_w01f 1

I did a diagnostics check on my HDD and it came back with a Code 7 error what does this mean where can i find info about it

2007-03-07 04:05:18 · 3 answers · asked by rob9029 2

I just installed a secondary hard drive as a slave unit to the first. I checked the jumpers and connections and it is showing device manager. What I am trying to do now is get it to appear under the "My Computer" section as Drive D as my original one is Drive C so that I can save different programs and files to the different drives. So anyone have an idea on how to do this?

2007-03-07 03:58:22 · 3 answers · asked by Anonymous

2007-03-07 03:53:16 · 2 answers · asked by lone_w01f 1

I have a laptop and after seeing a video of beryl running at http://thatvideosite.com/video/4040. Can my laptop run this set up. thanks:
Center Processor
CPU Name Genuine Intel(R) CPU T2050 @ 1.60GHz
Code Name
Manufactory GenuineIntel
Frequency 1600MHz
Voltage 3.3V
Serial Number 0000-06E8-BFE9-FBFF-0000-C189
CPU ID 6-14-8
Level1 Cache 0KB
Level2 Cache 0KB
Level3 Cache 0KB

Memory
Total Memory 1014MB

HardDisk
Capacity 93 GB

Video Card
Adapter Mobile Intel(R) 945GM Express Chipset Family
Memory Size 0MB
BIOS Info
Driver Version 5.1.2535.0
Multimedia
Device Name Realtek HD Audio output v5.5
WinSock Version 2.2

If you need anymore information let me know and i'll email a longer spec sheet with more details.

2007-03-07 03:31:52 · 4 answers · asked by vaughan9420 2

looking for adapters for digital dvr,dvd"s,ac from US ac supply to supply in india for various electronic goods

2007-03-07 02:46:06 · 3 answers · asked by kurien_rockypkr 1

I am running win.98 se the colors are screwed up and the icons on the desk top is bigger than usual. I go into the displays and change the color settings then it ask me to restart I do only to find when the computer restarts it is the same as if I didn't make any adjustments I have a driver disk for win.98 but everytime I try to run it a message saying illegel operation and program will close Hope some one can help thanks.

2007-03-07 01:57:51 · 3 answers · asked by Anonymous

petianm D or core 2 due (E6400 i will be using "GB DDR2 ram and 512MB ATI card which cpu will be better for this ?

2007-03-07 01:44:34 · 1 answers · asked by randike2007 1

I have several accounts on desktop - and when I scan the main account it takes a good few hours. Do I need to scan all accounts or is this already being done from main account?

2007-03-07 01:35:59 · 12 answers · asked by sunshine_mynx 2

i am using my pc for gaming , videos,music ..will this chip good for this?

2007-03-07 01:21:57 · 3 answers · asked by WDDA c 1

The program that is useing up my CPU is winesql.exe. When i end the process it come right back on the task manager and up goes the CPU to 100% again.

thanks

2007-03-07 01:20:32 · 9 answers · asked by kenneth751667 1

I am having problems with the new card that I purchased. It’s an X1950Pro made by HIS. Basically what’s happened is that when I tried doing the drives the way the instructions say to do it, when everything was done installing, the computer froze except for being able to move the mouse and then the monitor went black. The computer was still on and running, but the monitor’s led was blinking like the computer was off. I had to crash the computer in order to get it to reboot. I turned the computer back on and was never able to get the monitor to show a picture.

I put my old card back in and just let windows give it drivers. I uninstalled all software that had to do with ATI, including the drivers.

More info to come, went over 1000 words.

2007-03-07 01:00:20 · 2 answers · asked by nanookadenord 4

2007-03-07 00:08:12 · 9 answers · asked by pauljohn1962 1

helo there...i just got a new keyboard (logitech-internet pro desktop black) and its color is black ....my friend said me that the letters and numbers will fade...is this true??if yes then how much time will it take?
if it gets faded..can i do anything to make it visible again???

2007-03-07 00:07:11 · 4 answers · asked by alex_rock guy 2

Rate out of 10, with 10 being ideal.

Motherboard: Asus Stricker

CPU: Intel Core 2 Duo x6800 overclocked to 4.4GHZ (Water Cooled)

Ram: Corsair 6400C3 Dominator Airflow fan

Video Cards: 2 x XFX 8800GTX - Extreme overclock version (Water cooled and overclocked) SLi

Main HDDS: 2 x 74GB WD SATAII raptor HDDS 10000RPM on raid 0.

Storage Drives: 2 x WD SATAII 500GB

Dvd burners: 2 x Pioneer 16x

Case: Antec 1080x or something its big

Water Cooling: Thermaltake bigwater 375. (Think it was 375, the latest one). Was hard to set up in the antec case, lots drilled holes.

Monitor: Asus 22inch lcd, 2MS response.

Mouse: Logitec G5 (Adjustable Weight / Laser mouse )

Sound System: Logitec Z-5500 5.1 Surround

Creative HD Tv Tuner Card

My Epenis grew lots, I know some may say its a waste of money, but wont need a new pc for years to come.

2007-03-06 21:51:17 · 5 answers · asked by K B 1

my computer at work recognises my ipod and my mobile but not my flash drive. It comes up on my device manager but not on My Computer and I can't access it. Yet it works on other computers.

2007-03-06 21:08:15 · 9 answers · asked by Gina G 1

as the title says & another question...i'm using a windows 98 frm my dad's working com (he doen't use it so he brought it back 4 me) so how do i check the VGA thingy? and wads wit the Geforce thingy? i juz don't get it & i can't find it on tis laggy com

2007-03-06 20:49:40 · 6 answers · asked by mr dust 1

2007-03-06 20:36:23 · 4 answers · asked by Tristan G 1

Device manager isnt even picking up the drives, if any one can point me the right way or help would be great. cheers

2007-03-06 20:10:42 · 1 answers · asked by Parris 2