Other - Hardware - February 2007

2007-02-28 23:43:33 · 3 answers · asked by lord vader 1

My USB flash drive FAT32 hasd turned into RAW.
Win XP donot support RAW file system.
How to convert back into FAT32 or FAT..

2007-02-28 23:22:21 · 3 answers · asked by Manoranjan Reddy Mandadi 1

I need to use this chip for my project work.So i need to know the cost of these chips.Can you help me out guys.

2007-02-28 23:17:53 · 1 answers · asked by Ravindran. M 1

the photos on my old pc and the camera that took them is kodak easyshare cx7310

2007-02-28 23:16:52 · 3 answers · asked by njf 2

2007-02-28 22:50:45 · 11 answers · asked by Richard B 2

ive been told to defrag my computer i dont know anything about this all i know is that ive got 49%space left any tips.thanks

2007-02-28 22:36:51 · 10 answers · asked by Anonymous

My PC was going on fine, but on 1st MARCH 2007 i formatted it and re-installed windows XP SP2. Now i DO NOT see any icon of SOUND near the system clock.
when i go to control panel and click on SOUNDS AND AUDIO DEVICES. the volume tab says that there is no DEVICE INSTALLED.
my motherboard is "Asus P5GL-MX (3 PCI, 1 PCI-E x16, 4 DDR DIMM, Audio, Video, LAN)"
my chipset is "Intel Grantsdale-G i915GL "
my audio adapter is "Intel 82801FB ICH6 - High Definition Audio Controller [C-0] ".

Still the same problem. I have already tried many .INF files but still i dont hear any sound.

Please GUIDE me. I am totally dependent on the answers of this question. please help me out. thanking you in advance.

2007-02-28 21:58:47 · 5 answers · asked by chintu 2

2007-02-28 21:47:43 · 9 answers · asked by D 1

when i want to connect to internet . i receive theis message:"the modem is already in use or not configured property...". and when i query my modem in device manager i receive this messgae: "the port could not be opened...".
i'm very angry for this problem.please help me.please

2007-02-28 19:18:56 · 4 answers · asked by Anonymous

i habe 4 spot in my case for fans 2 at the back 1 on the side and 1 a the front how should i put the fans blowing in or out?

2007-02-28 18:50:24 · 6 answers · asked by chriswinter82 1

which option is better in hard disk for performance.
single hard disk with large capaity or two hard disk first is for operating system and second is for data only.

2007-02-28 18:20:33 · 9 answers · asked by mw_7009 1

Thank you for helping!!!!!!!!!!!!

2007-02-28 18:12:06 · 4 answers · asked by Anonymous

I saved all my music to an ipod before formatting my PC and after I put them back I can't play them any more. it automatically opens the internet when I try to play them.

I tried to put other Music player instead of Media Player then K-lite codecs but still there is no diference.

A friend told me that it's impossible to play them anymore because when I copied those music my media player was in "Right Protection" option.

Thanx!

2007-02-28 17:58:54 · 2 answers · asked by Invasion 3

I have this hard drive that I had on a computer with windows 98. My computer is not working anymore so I bought a hard drive enclosure to get the files from this hard drive but my xp can not even read it. I connected it to the usb as an external drive but it does not even show on my computer. The other hard drives I have work perfectly with the enclosure. I don't want to lose the files I have on this hd.. Can somebody please help.

Thanks

2007-02-28 17:34:21 · 8 answers · asked by artness98 1

im new at this and im wondering

2007-02-28 16:37:51 · 6 answers · asked by darkangelflea 2

according to some of the folks I asked there should be a section in the BIOS allows me to do " jumperless overclock " but I just cant find it. so I figured it should be done in some other ways....

how ? is there a software of something I should download ? and physical moderfication on the cpu it self ?

I read overclock.net's guide and my board's BIOS is different from what's being said in the thread.

I dont have an option of playing around my CPU's setting " manually". the only things that are in my " CPU settings " section are:

VID CMOS setting : 62
max cpu id value limit: disable
cpu interneal thermal control: auto

Hyper threading tech: enable.

on the top of those things are my CPU's current setting but all texts are darken.


thank you

2007-02-28 16:18:03 · 1 answers · asked by Raiden H 1

i have this problem,i log out of my pc and turn the back switch off right and i turn my moniter off and speakerss ,,well i turn it all off,,but when i wake up in the morning i want to turn my pc on right so i turn the moniter on,,speakers on then,,then i go for my switch behind the computer box and turn that on then i go to the front and push the power butten on and nothing happeens,well i push buttens again off/on/ i go threw this forrrrrrr like a hour more or less its up to the pc and it is verey stressing. like what is the deal is there somthing wrong,,,should i leave the back switch on at all times and only log out and just push the off andon butten only and just leave the the backswitch to the box alone,,,well last nite i loged out and just turned the butten off in the front of the box off and didnt touch the back butten and when i woke up i turned it on and it worked i didnt have to mess around with the pc to boot it up whatever that means,so is it safe to leave the back switch?

2007-02-28 16:08:54 · 4 answers · asked by darkangelflea 2

to my master 120 gig drive, only problem is that I cant find my partitioning software cd to format it into only one partition. The disk has an hp recovery partition taking up about 5 gigs.

What is the easiest way to format it and just have one, I know I could run my windows xp and do it without harming the operating system on the master but is there an easier way?

2007-02-28 15:51:06 · 3 answers · asked by Anonymous

2007-02-28 15:44:13 · 9 answers · asked by Anonymous

Im gonna get a new Graphics Card and I got a new computer and dont know how to tell if im gonna need a new power supply to support the graphics card

2007-02-28 15:37:24 · 7 answers · asked by Mike T 2

I sm going to buy an external DVD burner for my laptop, and am looking fpor advice. What controls the speed you PC or your burner? what different speeds are there and just what would you suggest? Thanks

2007-02-28 15:19:12 · 1 answers · asked by Joshua Y 1

so I have an old school IDE drive as C drive, where my OS is installed within. and I just added a new SATA as D drive, where my game will be installed within.

now, if I run the game from D drive, which's a SATA drive, will it get the speed advantage from being in a SATA drive? or it will be still running on the old IDE speed simply because my OS is running in the background in a IDE drive.

thank you !!

2007-02-28 15:08:19 · 2 answers · asked by Anonymous

2007-02-28 15:05:55 · 11 answers · asked by nits 1

yo. i have a ATA controller on my motherboard. and a PATA controller in a pci slot
i dont see in my boot menu how to change the boot order between the two. i set it to scsi to boot either.
it trys to boot the PATA drive first.
i have deleted the partition on that drive.
it says disk boot failure, insert system disk and press enter.
rather than going on to the SATA drive with an os.
how can i fix it ?

2007-02-28 14:41:18 · 5 answers · asked by Anonymous

See, I have found something, it is interesting to me. But don’t know why it happens.
Right Click on task bar and open Task Manager.
Then on Task Manager click on Performance tab, which shows your processor usage.
Close any other window or minimize them.
Now you should see only Task Manager (Performance tab) and Desktop.
Now, keep pressing any key on your keyboard longer. For example.
Press enter keep it for 3 seconds.. What happened? Nothing..
The processor still shows 2% usage.
If you press any key and keep it longer, the processor still shows a small percentage of usage.
But now try this:
Press (Print Scrn) and keep it for 3 second?
What happens?
Do u hear any sound from your computer?? Yes..
Look at the percentage.. it goes to 100%....
Why is it?

2007-02-28 14:38:17 · 7 answers · asked by Great Man 1

2007-02-28 14:24:09 · 7 answers · asked by Z, unnecessary letter 5

alright so, my shift key has turned in to a cntrl key, my shift key has gone a miss, windows key doesn't work at all. they all got switched around, and i have no idea how to switch them back. and i really need my shift key. lol, anyone know how i can get it to go back to the proper format...i can't even put a question mark...-.-

2007-02-28 13:39:38 · 3 answers · asked by alex 1

We will be upgrading to Windows Vista soon. I like to play the Sims. My husband thinks we need the one with the TV tuner built in. We are prepared to buy a 500 watt power supply to support it. We need PCI express. We have 2.66 ghz dual core pentium D, 1 gig of ram.
Right now we have ATI radeon 200 integrated. Hubby thinks he wants the All-In-Wonder, what do you think?
I want the best deal but I really want to buy it at Circuit City or Staples because I have a gift card for those. Willing to go elsewhere though.

2007-02-28 13:13:15 · 5 answers · asked by Anonymous

plz i need to know if i can fix the tray like in the next 20 min plz help, and no i cant buy a new one my dad will kill me so plz how do u fix the tray. I put it back but now it wont close i need to fix that

2007-02-28 13:03:17 · 8 answers · asked by c_run123 2

2007-02-28 12:43:53 · 22 answers · asked by Anonymous