Other - Hardware - March 2007

2007-03-24 04:24:48 · 4 answers · asked by fxsanyi 1

i want to upgrade my current motherboard to a one that can support a faster processors.. but it's a laptop and im having the hardest time finding one that will fit into it.... INFORMATION: (current) celeron m processor... ddr2 ram.. cheap graphics card....(upgrade) core 2 duo processor 2.00 Ghz.. ddr2 ram... good graphics card
Suggestions welcome.... websites if you know of any.

2007-03-24 04:24:23 · 4 answers · asked by iamjustbored10 3

No details.

2007-03-24 04:18:50 · 7 answers · asked by Winkerbean 2

2007-03-24 03:18:02 · 8 answers · asked by Abdullah Mirani 1

Hi all
After everything was going well. Now my pc doesn't read my Usb flash nor any usb peripherals.
I have checked the usb controllers in the device manager and they were working properlly.
What can i do ??

2007-03-24 03:16:27 · 2 answers · asked by Anonymous

Okay, so my hard drive died and I just plugged in my new one. It's an Maxtor Diamondmax 20 80GB PATA

I turned the computer on, all is well. I put in the Windows XP CD and it started setup ok - and then I realized it was seeing my USB stick as the C - drive. I panicked (being a computer zero) and exited the Setup process when the prompt came up. I got a message saying the computer would re-boot in a few seconds, and during that time I unplugged the data stick.

Sure enough, the computer rebooted alright and now I get this message "Error loading operation system". (It doesn't matter whether I have the disk in or not) How do I get myself out of this?

Thanks.

2007-03-24 03:07:31 · 3 answers · asked by Anonymous

I've got a shuttle FS50 with a 150Watt power source.I want to get a new graphics card as playing games on my old machine is not that great.Unfortunately, my pc only has 32-bit pci slot and don't want to spend cash on a new pc.I did a search and found out about radeon 9250 but it requires minimum of 250 watt.Was wondering if that's gonna be a problem.

2007-03-24 02:51:51 · 4 answers · asked by P J 1

when i play music through anything wmp winamp whatever there is a clicking noise every now ang again like im playing vinyl. ive heard it before on another pc somewhere ant wernt that bothered cos mine is reet.

is there a simple cure he dont need a new sound card does he i think its a ac97 or something like mine but his sounds crap

2007-03-24 02:29:40 · 3 answers · asked by filthboyzx81 2

yea.. i don't think its possible.. but :-)


oh, and how would you go about putting it into the .iso image?

thanks

2007-03-24 02:07:40 · 2 answers · asked by Anonymous

I'm guessing it's screwed and broken. It emits a lovely tune every time I try plugging it in. Is there any way to retrieve the files from it? Could sending it to an "expert" help in any way? Or am I doomed?

2007-03-24 01:08:32 · 3 answers · asked by Valerie 2

My keyboard misses letter and numbers when typing , not all the time but alot. Bought a new keyboard and it does the same. Any ideas?

2007-03-24 00:42:41 · 8 answers · asked by lsvettek 2

I tried to hook-up the Hard Drive to my computer, but when the set-up menu came up, it wasn't in Japanese or English, so I couldn't understand it. Is it okay to use with my computer? If so, how do I install it?

2007-03-24 00:42:20 · 3 answers · asked by Sarah C 2

whenever i try to install latest games on my computer, sometimes i get the open gl error on my desktop..is there any solution to fix this problem without buying any specific hardware,so that i can continue with my games...how best can this problem be fixed??
my computer specification-
amd sempron -VIA KM266 PRO chipset ,A(462)socket, K7VM3(asrock motherboard).... winxp -operating system, ram-256mb

2007-03-24 00:11:20 · 5 answers · asked by Anonymous

I was wondering if there was a test where it tests to see if EVERYTHING is working ok. Thanks in advance :)

2007-03-24 00:06:40 · 13 answers · asked by ♥frodo_covcity♥ 2

Please read the following and provide troubleshooting steps.

Issue:

Monitor goes blank. Keyboard becomes inactive.


Description:

This happens following two actions: 1] When I power on my computer tower 2] When the computer is already powered and running normally

In the first case, only the fans seem to have started and the keyboard's Num Lock bulb doesn't glow at all. However, the monitor gets power and displays a 'Check cable Connection' message. There will be no display.

In the second case, the same issue occurs when I try to switch between different user accounts. The monitor loses display, not power. And they keyboard becomes inactive. The CPU seems to be running normally as the fans keep running and the light on the tower keeps glowing.

Note: This is not a problem of computer shutting down abruptly

Please check the additional details for system configuration. Refresh the page if the detials are not showing up.

..

2007-03-23 23:59:59 · 3 answers · asked by Silly Shelu 1

2007-03-23 23:49:41 · 7 answers · asked by Anonymous

2007-03-23 23:10:40 · 5 answers · asked by mobi 2

2007-03-23 22:31:59 · 17 answers · asked by Anonymous

my system running very slow..........please gtuide me.........
i have core 2 duo intel E6300 processr, 256 mb ddr2 sd ram ,80 gb sata2 HDD, D946GZIS motherboard, winXP home 2002 genuine....i cant find the problem .please guide me.......there is a frequent hangups and ikon freesz.....where ever i give command to the system it takes too long even to read it..means the mouse and even key board is very slow .where is thye problem............

2007-03-23 21:50:07 · 8 answers · asked by Anonymous

Hardware Information
--------------------
CPU : Intel Pentium 4 Processor 1900 MHz
Bus Speed : 100 MHz
Motherboard : KOB KOBP4M266A
System : KOB KOBP4M266A
BIOS : AMI 07.00T
Memory : 640 MB Ist slot-128mb,2nd slot-512mb
Sound : VIA AC'97 Audio (WAVE)
Video : NVIDIA GeForce FX 5500
i jus want to increase the RAM size by adding 1gb instead of 128mb ...I want to konw tht my motherboard is compatible for my requirements...I can't find the Manual Online & with me... so please suggest me...........

2007-03-23 21:24:46 · 3 answers · asked by V 1

I need a 754 w/video and 7.1 audio....

2007-03-23 21:10:42 · 4 answers · asked by Jeff S 1

Is the program on my pc Windows Media Center free to use?Since it allows for us to watch TV and listen to audio, I was wondering if it is free to use.

2007-03-23 20:15:51 · 3 answers · asked by bananafanafofanni 2

i just purchased the new DFI LANPARTY UT NF590 SLI-M2R/G Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard so i could use my am2 proccessor and i started plugging everything ina dn noticed they only have one ide drive port. I do not understand how i am supposed to install two cd drives and two hard drives with only one ide port?

2007-03-23 20:11:27 · 1 answers · asked by lyd285 2

To continue, I must begin by saying that my motherboard was manufactured in 2004, but there have been more versions ot the bios published since then. I don't think that this is relevant. (But I could be wrong.) The thingsthat I wanted to say earlier (but was deprived of saying due to length constraints) are as follows:

1) The windows xp setup disk will not reformat my hard drive agfain. It crashes when I run setup.

2) Enabling LBA mode as the drive label advises me to do results in a system crash. This occurs before I can even exit the bios.

3) Can anyone give me some insight? If not , don't bother responding. If so, I am greatly indebted to you.

2007-03-23 17:57:05 · 5 answers · asked by Steve P 2

Hi, I am trying to boot my old computer (purchased about 6 years ago) that I have not used in a year. But now everytime I booted it, nothing would show up on the screen, and after a few seconds, I would hear this alarm like noise that alternates between two high and low pitched sounds. First I unplugged the harddrive's power, but the beeping continued. Does anyone recognize the problem? Thank you.

2007-03-23 17:56:17 · 14 answers · asked by Leon L 1

2007-03-23 17:48:13 · 6 answers · asked by cg5050can 1

2007-03-23 17:35:18 · 7 answers · asked by smokesha 3

it's been well over 30 minutes. i can't tell if my computer froze. doesn't seem so.

2007-03-23 17:33:59 · 4 answers · asked by smokesha 3

I need help with a mike on my computer. I need to know how to talk into it. It is a NVIDIA(R) nForce(TM) Audio. Can I even talk into one of dese?

2007-03-23 17:33:09 · 1 answers · asked by 'тнєє cσмρυтєя иєяd :) 2

I was using Acronis Disk Direstor to resize a partition, which I have done many times before. Just today, when I tried to resize my D drive, I got an error message saying "Cannot resize partition with bad blocks...(and something about restart the computer)". What exactly is a bad block? Is it permanent physical damage on the HD? Should I be worried? Is there a way to fix it?

2007-03-23 17:28:55 · 4 answers · asked by clone17 3