Desktops - June 2007

i bought a abit kn9 sli mobo, amd 64 x2 4600, 2GB Corsair DDR2 xms2 ram, zalmancnps9500 am2 cpu fan, xfx geforce 7600gs video card, 250gb harddrive,and a JPAC 468 black Black Steel ATX Mid Tower Computer Case 500W Power Supply.....i connected everything and i press the power button and it doesnt start and idk what to do?? any advice or anything please im really stuck and i feel like i waisted my money

2007-06-20 05:35:21 · 7 answers · asked by mrzooyork 1

What maintenance, or corrective procedure, should I perform after a power cut? Every time there is a power cut my desktop is either slow to boot, or fails to boot and I have to boot in safe mode. I use Tune Up Utilities and Ultimate Defrag to keep everything fast, but after a power cut, I get boot problems. Any advice would be appreciated, thanks.

2007-06-20 03:32:37 · 3 answers · asked by ? 3

2007-06-20 03:17:37 · 6 answers · asked by Anonymous

I bought an MSNV 939 motherboard. My problem is the bottom of the of the motherboard where the CPU is, protrubs, preventing the motherbooard from sitting flat on the case panel. The screws won't reach the holes. Anyone have a soloution to this problem?

2007-06-20 02:40:54 · 3 answers · asked by lewis 1

But the previous one have been infected with brontok virus.

2007-06-20 01:54:51 · 15 answers · asked by Anonymous

My Boot Screen presents...

Primary Master : STXXXXXXX 1.1.01
Primary Slave : None
Secondary Master : None
Secondary Slave : None

Primary Master hard disk fail

Press F1 to continue, DEL to setup/Q-Flash

Please help u Tech Guys ...I am left with nowhere...help me to fix this

2007-06-20 01:51:06 · 11 answers · asked by Samiulla L 1

2007-06-20 01:47:26 · 3 answers · asked by grant_69_98 2

i want to find out which one i should buy

2007-06-20 01:42:02 · 9 answers · asked by yahaa 1

Can i run a 400 MHz,DDR RAM with 333 MHz,DDR RAM?
i have a pc with pentium 4,1.8 GHz,256 MB 333 MHz DDR RAM,VIA Motherboard. I want Upgrade MY RAM. Can i run 400 MHz 512 MB DDR RAM on This PC with 256 MB RAM. my system model is P4M266A-8235

2007-06-19 23:02:46 · 4 answers · asked by varungoel2003 1

Asus P5N-E SLI NVIDIA Socket 775 ATX Motherboard.
LINK http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2853608&Sku=A455-2322

or

Intel 975XBX2KR Intel Socket 775 ATX Motherboard

Link

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2563503&Sku=I69-2145


Keep in mind i have a Radeon x1900GT PCI-E graphics card. 1 SATA Harddrive, 2 ATA Harddrives, 2x1gb PC2-4200 DDR2 533Mhz, 2x512mb PC2-4200 533Mhz of RAM.

Or is there a better motherboard I should be looking at for around the same price.

2007-06-19 21:07:18 · 4 answers · asked by Anonymous

plz tell me the normal temp range for 8500 gt 256mb thanx.

2007-06-19 20:38:42 · 1 answers · asked by A-Kay 2

2007-06-19 18:25:42 · 1 answers · asked by Gloria S 1

I want to know around how much it would cost and if you could tell me what to buy and where to buy it thanks in advance and I have a hp pavilion 751n and here is some of the basic info about it
Hewlett-Packard
Pavilion
Intel(R)
Pentium(R) 4 CPU 1.80 GHz
1.82 GHz, 224 MB of RAM

2007-06-19 17:24:17 · 9 answers · asked by Akeru 2

My computer is falling apart. I want to buy a new one. I've had this one for years. I have Microsoft Office (including Publisher) & Nero Burning Rom on it. I have no idea where I put my disks. I can't find them. I was wondering if there were a way that I could burn those programs onto a disk, so I can have them to put on my new pc, w/out having to buy them over again. If so, what type of disk would I use. I have CD-R's that I burn music on. Would that work or would I need a CD-RW? And on Nero (the burning program I have) would I choose to make a "data" disk or choose another option? Thank you for your time!

2007-06-19 16:35:19 · 6 answers · asked by Judy37601 1

I'm wondering If I should overclock the Intel Core 2 Duo e6700 (2.66 ghz) to 3.33 ghz. Is it worth it? thank you

2007-06-19 16:23:45 · 6 answers · asked by jpnssmasher 1

Hi, I installed WIndows vista on my windows xp. NOw I no longer want windows vista. (I did clean installation). Can I reinstall windows xp over windows vista???

WIll I be facing any problems??

2007-06-19 14:09:47 · 4 answers · asked by indianbhai420 3

I was thinking of adding a video card and perhaps another harddrive if I have the room and I'm worried that this will really tax the 305W stock power supply. Do you know if I can just swap out the power supply if I need too? How do I know if I can and what will fit? Thanks for the help!

2007-06-19 13:49:18 · 6 answers · asked by Mike D! 1

my computer no longer gos to windows so i want to erase
the hard drive and install a new operating system.

2007-06-19 13:07:55 · 6 answers · asked by can0fish 2

I'm building a new pc soon with the following core specs

550 w power supply
AMD Athlon 64 X2 5600+ processor( i don't know if it's 64bit)
3 GB RAM
160 GB HD DRIVE
ATI RADEON X1950 Pro
Windows XP Home Edition 32 bit

Will the 32 bit XP conflict with the Athlon 64?

2007-06-19 12:59:11 · 8 answers · asked by PCP 1

I dont particularly want to do away with the PC as its a pretty good performer. I would just like to know if there is a way I can boost the performance of the Pentium 3 so I can watch AVI movie files. There is 768mb of RAM installed.

2007-06-19 10:59:58 · 3 answers · asked by Linux Mint 11 7

I have this:

Pentium 4 2.8ghz Hyperthreading
ATI radeon 9600 256mb
512mb RAM


I need to know for
Call of Duty 2
Battlefield 2
Need for Speed Most Wanted
Doom 3

2007-06-19 10:50:43 · 4 answers · asked by Anonymous

I would like to know which trade off between the 5200+ vs 5400+ is better to have, for gaming and media purposes. The 5200+ comes with 2x 2.6ghz with 2mb L2 cache while the 5400+ comes with 2x 2.8ghz with 1mb L2 cache. So basically the trade off is more cache and .2ghz less speed or the .2ghz speed with 1mb less cache. Which is the better choice? Any help would be awesome, thanks!

2007-06-19 10:48:41 · 3 answers · asked by Dennis 2

My friend bought a used custom built PC a year ago and he recently began experiencing virus/spyware issues. We ended up reformatting the HD, but then I later found out the previous seller did not give him any recovery/drivers disks. What is the best way to locate drivers? I've found most of them going on manufacturers websites, however there are 2 devices I still need drivers for and just can not find them. Under the Device Manager, it says "Unknown" device for both of them. Please help!

2007-06-19 10:43:02 · 5 answers · asked by Anonymous

2007-06-19 10:30:36 · 13 answers · asked by grant_69_98 2

I have an old computer which has Seagate 4.3 gig hard drive. I want to add a new internal hard drive to my desktop but can't decide whether to buy ATA internal hard drive or SATA? I talked to tech support at Seagate and they suggested if your mother board is too old then probably I need to buy ATA internal HD. SO how would I know?????

2007-06-19 09:11:19 · 9 answers · asked by shreyas 1

2007-06-19 07:44:12 · 5 answers · asked by Brenda s 1

Dell the best computer ever ? to me no, I like Windows Xp more. How about u ?

2007-06-19 07:01:27 · 9 answers · asked by Anonymous

I recently Built a computer for a friend but I dont know what price to sell it at. Can someone help? Here's what I put into it. All new parts.
80 G Hard Drive
512 MB RAM
3.1 GHz Processor
Case
DVD Drive
Power Supply
5500 Geforce Nvidia with 256 MB

2007-06-19 06:46:48 · 8 answers · asked by dmaster225 1

2007-06-19 06:11:25 · 11 answers · asked by krazy_sanders 1

I am considering upgrading RAM by 1 GB and a 1GB flashdisk is quite a bit cheaper than 1GB DDR Memory. But I'm wondering if the flashdisk option is as efficient.

2007-06-19 06:04:53 · 2 answers · asked by thendi_100 1