Cars & Transportation - 19 April 2007

2007-04-19 17:45:26 · 14 answers · asked by GURUBARAN V 1 in Nissan

im looking for info on how to install the 2002 hid headlights of a nissan maxima onto a 2001 maxima. ive heard that there needs to be some wiring done and want to find out exactly how to do it. please sends sites that have instruction. that would be helpful, thanks..

2007-04-19 17:43:36 · 2 answers · asked by robert j 1 in Nissan

2006 model. I am wondering if this is a good deal. It seems like it--it's a nice car, drives well and hasn't had any problems. (Lease is 10 months old). Mileage is appx 12000 per year plus $0.10 per mile.

It's not my car--I use the Subway. But I'm curious. I wonder what the car will be worth in 42 months.

2007-04-19 17:35:12 · 7 answers · asked by presidentrichardnixon 3 in Nissan

So I can communicate with it.
USB port?

2007-04-19 17:17:36 · 18 answers · asked by mar m 5 in Other - Cars & Transportation

2007-04-19 17:15:52 · 2 answers · asked by Johnny Tostado 2 in Motorcycles

I am in search of a turn signal alarm ( or something similar) for my father's car because he has trouble hearing the sound and he says its dim in the daytime. Any ideas?
Please no rude comments, he is not old he just does not hear very well after being in the Navy for many years.

2007-04-19 17:07:02 · 6 answers · asked by Lily18 5 in Other - Cars & Transportation

I am looking for a used car and I found that car. Do you think its reliable? I am going to use it for only 2 years.

2007-04-19 17:04:30 · 12 answers · asked by answers4u 2 in Chevrolet

I heard there is a way but you have to be at rpm or speed to do so. Anyone know it for a civic 2003?

2007-04-19 16:52:09 · 21 answers · asked by phong1737 3 in Honda

I need some major insight on this, cuz the warranty deal sounds to good to be true. 100,000 OR 10YEARS? I am looking to make a purchase on one of these vechiles.

2007-04-19 16:41:15 · 16 answers · asked by zengarden 2 in Hyundai

2007-04-19 16:26:21 · 7 answers · asked by tb1675 1 in Rail

2007-04-19 16:22:28 · 2 answers · asked by pat300c 1 in Maintenance & Repairs

I drive a 2000 VW passat manual transmission and it has an 18 gallon tank I usually fill it up and it lasts less than a week. I swear to god I go nowhere and I have no idea where my gas goes..could there be something wrong? Am I doing something wrong? could someone be stealing me gas!?

2007-04-19 16:15:48 · 13 answers · asked by jmt4127 3 in Volkswagen

My car stalled and I see a lot of water coming out exhaust pipe. Its also rained a lot lately so gas at gas stations might have water in it.

2007-04-19 16:13:12 · 8 answers · asked by Blank N 2 in Maintenance & Repairs

2007-04-19 16:08:56 · 5 answers · asked by jay b 1 in Maintenance & Repairs

What are some origins to the beautiful, current cabs of diesel locomotives on the rails today?

2007-04-19 16:08:50 · 1 answers · asked by ,,G'' 2 in Rail

I would like to disable the "Door ajar" alarm/buzzer for my 1998 Ford Explorer four door. The door on the car cannot be repaired but needs to be replaced. In the meantime, I would like to disable the alarm because it is driving me crazy. Any suggestions anyone?

2007-04-19 16:08:08 · 4 answers · asked by Anonymous in Maintenance & Repairs

2007-04-19 16:07:31 · 4 answers · asked by Anonymous in Ford

i was wondering what racing fuel, or fuel with 100+ rating is used for? also is it safe to use on any car?

2007-04-19 15:56:33 · 6 answers · asked by Nino N 2 in Other - Cars & Transportation

The space between the tracks and the outside margin plus total width?

2007-04-19 15:53:59 · 1 answers · asked by Richard H 2 in Rail

This is making me crazy. There is a metalic ticking sound coming from the top end camshaft area.. But the weird thing is that it goes away after it gets hot. And some days it doesn't do it at all. It also varies in volume from a clacking to a clicking to a ticking. I have had mechanics check it over, have replaced all 16 valves, and still it comes and goes. It doesn't seem to affect the performance, but with all the money I've thrown at it, it makes me crazy. Has anyone had this experience? Got any ideas? Perhaps a defoamer hydraulic lifter thing? Have tried many viscosities of oil, always keep it fresh,etc. I bought and restored this bike nine years ago and it is definitly my baby. Don't want to give it up. Help!

2007-04-19 15:52:38 · 2 answers · asked by Gary S 2 in Motorcycles

I already did all the behind-the-wheel stuff.
Now, I have to take the road signs test and the twenty questions test (where you can't get over five incorrect).

I'm going to the DMV tomorrow so any words of advice would be appreciated.
Wish me luck...

2007-04-19 15:42:03 · 12 answers · asked by Jacques 5 in Other - Cars & Transportation

I'm talking about most modern cars that display fuel range based on the amount of gas in the tank.

2007-04-19 15:31:01 · 4 answers · asked by dumbo 1 in Other - Cars & Transportation

did a timing belt, head gasket,... replaced every gasket and seal aside from the rear man seal about a year and a half ago, to solve an oil leak, just ask ill go into that one later, but back to my question. white smoke out the tail pipe signifies water, from either a head gasket or a cracked block or head, but crompression pressures are within specification just more of a spread than i want to see. what do you think the problem is. #4 , i think i made an error in my initial reading, but it is too late now.
#1 158 psi dry, 168 wet
#2 172 psi , 180
#3 170psi, 170
#4 185, 172
i am curious to hear what you think, i get to pull it apart and find out.

2007-04-19 15:27:53 · 4 answers · asked by mdk68gto, ase certified m tech 7 in Maintenance & Repairs

I would like to know the top speed for a 2002 Nissan Frontier Crew Cab SE, 2 WD 6 CYL.

2007-04-19 15:26:11 · 4 answers · asked by soccerman 1 in Nissan

I recently sold my 1990 Kawasaki Ninja 250. Now the guy I sold it to is claiming it is not street legal. I don't really know a lot about bikes so please forgive my untechnical terms. The front plastic fender? piece that keeps dirt, rocks, etc. from coming off is broken pretty much off. He is now saying that this makes my bike not street legal. He is also saying that it is illegal for me to sell him a vehicle that is not street legal.

I never claimed it was street legal or that it would even last 5 mins not to mention that a broken piece like that is pretty obvious at the time of sale. So does this really make my bike not legal for the streets? Please help!

2007-04-19 15:25:33 · 12 answers · asked by cougarcub02 2 in Motorcycles

1. Sitting at red light, a drunk driver hit us hard directly square in rear bumper. Damage to his car=totaled. Our vehicle $600 and bumper's main support system absorbed impact. It crushed the shell and absorbance foam. Impact was estimated to be at 20-25 mph.

2. My daughter in back seat sustained neck, shoulder and lower back injuries. All soft tissue.

3. Hospital bill was $2000, chiropracter $12,000. MRI that came back normal in the shoulder area, showed limited findings. $1500.

4. Today, the aduster contacted our medical provider and said he would not pay any of the medical bills! His reason, "damages to our vehicle was only $600! He did not call us, he called our doctor! Is this unethical and intimidation tactics? When the accident first happened, he said his party was at fault and to seek any medical treatment we needed, now this? He waits until my daughter is almost done with treatment?

5. Talked to several experts, said despite damages, impact was significant. help

2007-04-19 15:24:32 · 7 answers · asked by Skippy 1 in Insurance & Registration

2007-04-19 15:23:39 · 7 answers · asked by Joe 1 in Jeep

2007-04-19 15:08:33 · 5 answers · asked by Barak M 1 in Volkswagen

me = 16
me = perfect driving record
me = live in missouri
2001 eclipse, NOT convertible

2007-04-19 15:05:54 · 1 answers · asked by muggie 2 in Insurance & Registration

just got my Currie 9" housing in and need a 31 spline posi third member. I have found I need to look for a 81 and old ford 9" with the small hole and two larger holes outside that, on the axles.
Can you help me narrow down my search, I'm guessing an 81 and older F250. Please help I want to get the ford 9" going and going strong!!! Thanks, Joey

2007-04-19 14:59:51 · 2 answers · asked by troutdog311 1 in Ford