Computer Networking - January 2007

How do I enable WPA and Mac adress filtering on my belkin wireless network. I'm using a belkin54g router.

2007-01-13 12:36:29 · 2 answers · asked by OrganizedConfusion 2

A best deal would be a good thing. Thank you all. :-)

2007-01-13 12:16:56 · 2 answers · asked by goodoldm 1

These cables are usb male to male .When i initially tried to transfer my files, i could not establish a connection with my old computer because it uses windows me os, and it told me to upgrade the os of my old pc.

2007-01-13 12:10:18 · 6 answers · asked by worldsfinest_83 1

My whole house in on a wireless network because we don't want to have to run cables across every room and down the hallway.

My computer is around a corner, down the hall, and around another corner and my connection sucks. Is there a way to get a better connection without spending 60 bucks on a different router?

2007-01-13 11:54:10 · 6 answers · asked by fish guy 5

2007-01-13 11:51:25 · 9 answers · asked by rtorto 5

2007-01-13 11:39:04 · 1 answers · asked by Anonymous

Hello, Last night i was given a crossover cable, and want to use it to transfer some videos, and music to my laptop from my desktop. Both computers have Windows XP, and ethernet jacks. I just need to know what to do to directly connect them so that file transfering is possible. Try and be as specific as possible. Thanks so much, Brodster

2007-01-13 11:39:00 · 4 answers · asked by Brodey 4

Im on my router firmware update page. It asks me what file i want to update. I'm not sure what file to update, but it has a browse button next to it, do you know if it would be in the 'my computer' folder or what? please help. thank you.

2007-01-13 11:38:39 · 3 answers · asked by :)e 2

ok I need advise on how to network the cpu and ram of two computers together

Example

two pcs both 2 ghz and 512 ram what i want to do is make it so one project can have 4 ghz and 1g ram

or a website of were I can find info I know how to do file share and everything but i dont know how to link the processor and ram

2007-01-13 11:01:17 · 2 answers · asked by Anonymous

cant connect while inside house. can connect while outside.
Seems to be no signal detected inside. With the booster does the radiation beam from antenna become narrow and harder to align up. signal is also to be picked up by range extender inside to reach the wireless printer in office. Booster is 500mw netcomm. AP = netgear 54Mbps. Range extender is D-link with a 5db antenna. Belkin Wireless modem router for modem and router but wireless is disabled. distance from grid antenna is only about 15m approx. Only 1m approximately all up is from ap to antenna.

2007-01-13 10:54:49 · 2 answers · asked by Anonymous

if i get a Linksys WRT54G Wireless-G Broadband Router for my computer and modem does my computer have to be wireless or does the ethernet cable still go in the back of my pc?

2007-01-13 10:54:48 · 3 answers · asked by Anonymous

2007-01-13 10:47:37 · 7 answers · asked by Angelo S 1

hi,
I have a 54 MBPS WIRELESS ROUTER (WGR614), and i do not have a modem. Now, i have another wireless router on another room that's working and brodcasting wireless internet. Can i use the Netgear (WGR614) router as a wireless adapter where i can connect to the internet wirelessly? (it's like backward!). thanks.

2007-01-13 10:46:09 · 4 answers · asked by Sky Star 1

My brother can change the pictures of the people on his top eight to whatever he wants, can someone tell me the code for that please? And he also can change the name of the people on his top eight to whatever he wants also, can someone give me that code also?

Thanks!

2007-01-13 10:11:49 · 1 answers · asked by Anonymous

I have a desktop and another desktop and they are right near each other. Both have internel modems, and I want to be able to use the internet on both, at the same time. I own enough cords to plus into the wall, but I only own one phone line. I know this will make browsing, and everything else really slow, but I don't care. PLEASE help me! :) (I want DSL but my mom won't get it)

2007-01-13 09:51:58 · 3 answers · asked by Anonymous

2007-01-13 09:44:48 · 4 answers · asked by muffmont 1

I have a desktop computer (Windows XP), using a PCMCIA card (Sierra AirCard 875) to connect to the internet through Cingular. I want to connect a Linksys wireless router (Wireless-G 2.4 GHz) to the desktop, so I can also access the internet from my other computer (which will have a LInksys wireless adapter). How do I configure the desktop and router so I can have wireless on my laptop?

2007-01-13 09:43:01 · 2 answers · asked by Anonymous

I don't know much about Windows XP but i have experience with computers. Basically waht i want to do is find a find a setting in the bios for the wireless thing and disable it and then password protect it

2007-01-13 09:33:25 · 3 answers · asked by Anonymous

Isthere anyway to recover my user name and password for my router to update my firmware? The company is Belkin.

2007-01-13 09:05:18 · 9 answers · asked by :)e 2

My mobile is SE K750i and my SP is O2

2007-01-13 08:54:47 · 7 answers · asked by cichlid 1

Re-installed Win XP SP 2 and XP recognizes the Realtek Network Adapter, but it shows a yellow "?" mark next to the "Ethernet Controller" - and says that the Ethernet Controller is missing a required driver. Have been to Realtek's Driver site (very confusing) and downloaded 6 diferent drivers with no effect. Can anyone point me in the right direction - i cannot connect to the net until i find this driver. Pls help...

2007-01-13 08:43:05 · 2 answers · asked by grngynt23@sbcglobal.net 1

I have a desktop that is mapped to a shared folder on a fileserver. When i restart my windows 2003 computer and login in, the desktop is not available until after about a min or so. There is no network avaiable during this time also. I am connected thru a CAT 6 - 1 GB connection to the file server thru a switch. I have tried both DHCP and static address, but the network always starts very late. How can i fix that.

2007-01-13 08:29:32 · 2 answers · asked by asuboy75 1

2007-01-13 08:29:02 · 3 answers · asked by Edlir G 1

just wondering if i can connect the 2

2007-01-13 08:01:15 · 5 answers · asked by dwayne b 2

I have a Netgear Router (Model: RP614v2). We bought it back in 2003. Recently our ISP boosted our speed. When i have the modem connected directly to my laptop i get 10Mb/s. When i have the modem connected to the router which is connected to two other computers, we get around 5Mb/s. I know that 3 computers connected to the router can slow the speed, but even if the other two computer are shut down, i still only get 5 Mb/s. From what i have read, routers should only slow the speed by a few milliseconds, not 5Mb/s. I have also read that there are "b", "g", and "n" routers and that each one can handle a different internet speed. Should a router reduce a 10Mb/s line to a 5Mb/s line? How do you know what type of router you have (b, g, or n) and what its db limit is?

2007-01-13 07:18:46 · 10 answers · asked by Caleb 1

My printer is connected to one pc but I cannot create a local network. I have the BT Broadband Home Hub. I wnat to share files among the PC's on my home network. I have pC's which ar connected wirelessly and also some have wired connection. If anyone have the answers, can you advise me what I have to do to create the network? I have already tried creating it through windows network wizard but it has not been successful. Thanks in advance.

2007-01-13 07:10:53 · 3 answers · asked by DgRooven 1

I'm interested in buying the LF-B20 (Location Free Basestation 20) I don't want to buy it for the media aspect. I want it for connecting to the "Location Free" internet. I assume they mean to imply your no longer limited to where you can access the internet. HOW FREE? Don't talk about the environmental physical errors just the potential.

2007-01-13 06:48:55 · 1 answers · asked by Anonymous

i'm using a broadband connection and i don't have a router. but on my config. there is still a gateway IP address. does all connections have a gateway address?

2007-01-13 06:10:32 · 6 answers · asked by Anonymous

2007-01-13 05:58:48 · 1 answers · asked by missadrian05 2

Please tell me the mechanism that virtual circute switches might use so that if one switch losses all its state regarding connection, then a sender of packets along a path through that switch is informed of the failure.
Thanks

2007-01-13 05:03:38 · 2 answers · asked by Teddy 1