Computer Networking - January 2007

2007-01-26 19:38:27 · 1 answers · asked by navin n 1

Alright I have cable with a modem upstairs connected to a router. One cord is going to the downstairs. I have a second router in my room which I want to go to two computer.

I have all cords needed to split (No need for wireless) When I try it doesn't work , i think it has to do with the ip address and splitting the connection ( I have access to the router config) and I know your asking why not have everything hooked up in one room? well i need access to a router since i need several computer hooked up in my room to get internet. And the modem/first router need to stay upstairs..

So basicly I need it to work like Modem -> First Router -> Second Router

First Router has 3 computers hooked up to it ( 2 + my cord ) and in my room I have a router which I need to have hooked up to two computers..

First Router is: DX-E401 (Dynex)
Second Router Mine: is a D-Link WBR-2310

Internet = Cable

Total Computers: 4 ( 2 are mine)

2007-01-26 19:26:18 · 5 answers · asked by Anonymous

hai i join a group fropper.com which is very busy site i want to block that emil id.

2007-01-26 17:38:07 · 3 answers · asked by parshav_jain2006 1

i m an electronics engg. i want to know how can i resore my data from a computer whose IP adress i know but it is not connected to server. so i want to shere my data from that computer what should i do.?
pls help me

2007-01-26 17:34:56 · 1 answers · asked by parshav_jain2006 1

I want this reseach proposal for MS leading to Ph.D studies in Charlas Darwin University , Darwin, Australia. Please responde immediately. Thanks a lot.

2007-01-26 16:51:38 · 1 answers · asked by saramadeel 1

i have installled this ethernet card many times before, its a realtek card,what happened was i thought i inserted the card inside but in reality i didnt , so when i connected the yelllow wire in the motherboard the computer turned on for a second then turned off- almost like it was overpowered and blown, then i noticed that a strong smoke smell like a heated in a car. when i fitted the tower i then noticed that the card wasnt put in propery. now that i have fitted everyting correctly, everytime i turn on the computer, it you can hear it run but it dosnt sound like its starting up or making a loading sound and there is nothing showing on the the monitor even though its on. please- i have AS Chemistry and Biology coursework and notes for the exam which is next week!!!!!!!,my pc specs are;1.6ghz intel pentuim 4,512mb ram,5200geforce fx,supermicro P4SDA socket 478 pentium 4 motherboard, 40gb maxtor 7200rpm SATA2,if you have ANY information i would be so grateful, please anything, thanks.

2007-01-26 15:36:31 · 9 answers · asked by Anonymous

I live in spain and miss UK TV, you can watch alot of it on BBC's website but you have to be based in the UK. Is it possible to change my IP address to get around this. I am connecting to the internet via cable/dsl with a wifi box from ONO. please help, spanish tv is killing me.

2007-01-26 15:06:57 · 8 answers · asked by allenno1uk 1

2007-01-26 14:56:09 · 5 answers · asked by scotchman 1

Ok well i have 3 pcs connected to a linksys wireless router....
i have a cable modem too from optimum online
my main pc is able to connect to the net, but my other pc nd laptop does not. they both hav an ip of 0.0.0.0
my pc was never able to connect to the net....but my laptop was...until today....it just started to say acquiring network address for both of em....i have tried ipconfig /renew nd it gives an error sayin unable to contact your dhcp server. Request has timed out
i also checked my dhcp and it is already automatically started..also stopped nd restarted it, but still no use.......can someone help me please?
thanxx in advance

2007-01-26 14:46:47 · 6 answers · asked by khurshid b 2

I often take my laptop with me, but there's not always an access point nearby. Are there any ISPs that can be accessed wirelessly? Are they expensive?

2007-01-26 14:01:13 · 3 answers · asked by Anonymous

I have a D Link DIR 625 Wireless n router with a DLink WUA 2340 Wireless adapter on my Desktop. Both are capable of delivering 108 Mbps but I'm only getting 54.0 Mbps max. Router and computer are 5 feet away. anyone know how to get up to 108 Mbps? I'm on a DSL line connected to modem as well.

2007-01-26 13:00:34 · 8 answers · asked by Caper787 1

2007-01-26 12:58:51 · 3 answers · asked by GTP01 2

So, does anyone have an idea of how this would be possible, like to setup a big network or anything so I may have broadband access at my home? Any help would be greatly appreciated.

2007-01-26 12:49:36 · 8 answers · asked by Jarhead 2

2007-01-26 12:45:16 · 1 answers · asked by DedY B 1

I have set up a home network in my home, but all the computers must be on the same router to work on it. I was wondering how to set up a network that can work with computers on different networks (routers), with computers that are miles away?

2007-01-26 12:41:03 · 2 answers · asked by Anonymous

2007-01-26 12:25:55 · 7 answers · asked by here to help 2

I presently stay in Hyderabad and use BSNL Broadband Home 500 with 256 Kbps,but i find many times it is very slow and tiring. Hathway on the otherhand promises in the Day-Night plan 512 Kbps. Is it good to shift from BSNL now. Is Hathway uniform and reliable in their service.

2007-01-26 12:21:49 · 6 answers · asked by V.S.Je 3

I have an old Dell C640, and just recently, I've tried to add a new Wireless Connection because it calls for encryption. I seemed to have missed a step in the process, but tried to attempt to press "okay" and see what happens.

Now, not only will it not connect to the new wireless network I was trying to add, it won't connect to wireless anywhere (when it could prior to the changes). I've tried going back and deleting what I did, but on my list of "Wireless Networks," absolutely nothing shows up, so I have nothing to delete. However, I am able to connect if I add the wireless network, say, at my friend's house to my computer. But I want it to automatically connect like it did before so I don't have to manually do it again? It's weird.

I have seriously tried from restarting to System Restore. Are there any computer experts out there that could possibly find some solutions to this problem? Thanks so much.

2007-01-26 11:56:58 · 2 answers · asked by Rebecca 1

2007-01-26 11:38:16 · 7 answers · asked by crimson 1

I have a Speedtouch 510 modem/router and it is set up with fixed IP's for a Mac and another PC and some NAT settings for iChat etc.

Now I want to add a Draytek Vigor 2200 WE wireless router, so I can use my laptop with it.

The laptop 'sees' the wireless Draytek network, but how do I configure (and cable) the Draytec and the Speedtouch so that I can use the internet connection via my laptop?

modem/router > vigor 2200WE > powerbook

If you know a good webpage about this that would be OK too! Thanks.

2007-01-26 11:23:39 · 2 answers · asked by autoPimp 1

I live on long island. I have optimum online cable internet service. The service is supposed to provide 15mb (peek) download and up to 8mb upload. I have NEVER seen these results! when i plug my computer into my cable modem i may get up to about 8mbs download and 4 up.. fine.. but when i plug my pc into my router (a new netgear rangemax 802.11g router with 4 port switch) i am lucky if i get 2.5mb download speeds and maybe 1-1.5mb upload.
WHY!?!?! also, i have my wireless network secured with wep-psk2 using TKIP passkeys and its even on a dif channel then some of my neighbors but my laptop constantly looses connection and the ONLY solution people have for me is REBOOT your router!!! whoop dee doo!!! how come a cisco router for my office NEVER needs a reboot!?!?!?!!?

2007-01-26 11:16:08 · 3 answers · asked by SlyDogJeff77 1

I have an old Hewett Packar x86 Family 6 model 8 stepping 1 63.0MR Ram desk top since 1999. The hardrive has a UBS installed in it, but I am using DSL now since cable cannot set up in my area right now. So I have a router that only uses Ethernet. Is it possible for me to get an ethernet installed in my harddrive? And what would be the price range if I had it installed on haddrive?

2007-01-26 11:11:54 · 6 answers · asked by Contesta 5

I need to know what type of router to get and if I should get wireless or standard. I am using it around the house which isnt very big.

2007-01-26 10:07:49 · 4 answers · asked by hockeynut 2

2007-01-26 09:54:52 · 7 answers · asked by vanessa d 1

I have 3 computers am i am using yahoo at&t dsl. 2 of my computers can connect to the internet
but my third says Limited or no connectivity. I have tried doing ipconfig /release and

but when i do renew it says it has timedout

i tried the repair thingy but that doesnt also work.

it is set at obtaing an ip address automatically and dns server address automatically and i restarted
my computer already. i dont know why i cannot connect to the internet

can som1 help? please be specific because i dont know alot about computers... thanks

p.s on the subnet mask two of my working computers are at 255.255.255.0
the non-working internet computer says 255.255.255.0.0 is this the problem? and if so
how do i change the subnet mask

2007-01-26 09:51:50 · 6 answers · asked by Anonymous

2007-01-26 08:53:10 · 2 answers · asked by tuti_font 1

I need to open a port on my network, but haven't needed to do it before. Any idea on where to start looking? Or should I go straight to my firewall and look there instead of in Server 2003 (Standard)? Thanks!

2007-01-26 08:36:34 · 1 answers · asked by neuralzen 3

im trying a internet optimizer and it needs to no my true connection

2007-01-26 08:26:43 · 4 answers · asked by TERRY H 1

hi i have adsl 24 mb and i use a modem named zyxel.. my network adaptor is realtek RTL8139/810x Family fast ethernet NIC version 5.653.710.2006..i use bitcomet to download stuff but the speed is only up to 100 Kb..whats the problem? is it something wrong with my network adaptor..iv visited som sites for internet speed testing and my speed was around 4 mb there..whats wrong?

2007-01-26 08:01:04 · 7 answers · asked by Anonymous

I've have a Linksys wireless router with road runner. Pretty much every day I can't get on the internet. So I unplug the cable "modem" and the linksys for a few minutes. Plug in the cable modem then the linksys and it works. I've heard most people have this problem but only have to do this every month or so. For me it's everyday, now the last two days I have to do it like every half hour. What gives? Anyone else have this? What's the problem the cable modem or the wireless router?

2007-01-26 07:33:38 · 4 answers · asked by Anonymous