Maintenance & Repairs - June 2007

I used some car polish on someones car the other day and now it has left swirl spots in the car, i really need to get these areas out of the car. What can i do to fix this problem? Will a normal wax job fix this? please help.

2007-06-02 11:48:01 · 3 answers · asked by couple4anothergirl 1

Ok, 2000 lincoln LS with the 3.0L V-6
pulled four codes off this car, bank two catalytic code
and misfires on cylinder 2, 4, and 5.
I am hesitant to start pulling off this intake and checking my plugs because I don't have all data anymore, and I don't have a scope, all I have is my obd 2 scanner, and a digital multi meter.
Is there a way to back probe the coils and take a reading on a digital multi? I am not ruling out the injectors but I have noid lights for them...
thoughts? Suggestions? Online manuals? can anyone give me a five minute crash course in lincoln V-6's???

2007-06-02 11:37:08 · 4 answers · asked by Orlandoboat 2

I have a 2001 Hyundai sonata and it started to shake when i either step on the brake or the excel. I took it to midas and they said it is because of spark wire and they recommended a replacement (also said something about hard excess to the wire because it is underneath the engine. they have to take the engine and change it)
overall it will cost $600. is this reasonable price ?

2007-06-02 11:30:45 · 7 answers · asked by jihwa l 2

Okay, so everything in the car turns on, but when I put the key in to turn the car on, all it does it make a clicking sound. The battery, spark plugs and fuses have all been checked. Car was working fine last week, came back from vacation and now I can't drive it. Any help you can provide would be Super!

2007-06-02 11:22:02 · 6 answers · asked by bshell44 2

I heard that you need to buy the remote start separetely and the motion sensor also...

i thought those 2 came with the box!

Any1 that had this or another python series install have any input?

http://www.amazon.com/Python-1090-Security-Directed-Clifford/dp/B000NVEL1A/ref=pd_sxp_f_pt/105-3750556-2578035
^^^
It says it has it..so are people lying to me? or are they add ons

2007-06-02 10:32:11 · 1 answers · asked by Anonymous

I'm 15 and I have a 89' toyota supra turbo and I know NOTHING about cars. All lights work but the back left blinker and brake lights. The bulbs aren't out and the fuse is fine. I have no idea what's wrong and we're trying to fix it without taking it in... we just got a new clutch put in. Any ideas?

2007-06-02 10:28:43 · 8 answers · asked by Brittany F 1

Have already replaced-
distributor sender unit ( as advised by the AA)
Distributor
Carburettor

Problem is not fuel starvation.
It will start then run a little while then it just fades away but will usually start again straight after.
Any ideas ?

2007-06-02 10:24:14 · 8 answers · asked by Debi 7

i have a oem coil spring compressor #27035 and no idea how to really use it... the directions dont make any sense. if you can help me with a picture that would be awesome!

2007-06-02 10:08:11 · 3 answers · asked by Anthony 2

It's a strange shaped plastic tool on the hinge of the fuel filler door on both the Mk4 and Mk5.
Can't see any mention in the handbook of either Astra.

Only had a look on diesels... may be there on petrols too.

Any ideas anyone?

2007-06-02 10:05:28 · 2 answers · asked by UppyJC 2

I have a 94 sentra 1.6 i4 and the other day i went to go somewhere and went to start my car and it would not turn over. The power in the car was working but no start.I have decent knowlege of cars so i was able to count out the alternator, starter and the normal small stuff like that. I kept turining the key and the car was trying to start so i pumped the gas a it started right up. I have fuel injection so why it started does not make sense. The car does not die out all the time but it does seem to be struggleing for gas or something like that, every few seconds if u listen to my muffler you can here like a putt then it will run then putt, its odd. I have been told fuel filter, or fuel pump. I have no idea anything would help

2007-06-02 09:57:38 · 4 answers · asked by Anonymous

I replaced the battery, as the truck would not start. It just clicked when I tried. After the new battery, the truck did the same thing. Anyone have a suggestion? Is it the starter cellenoid?

2007-06-02 09:38:54 · 3 answers · asked by ffcounselor 1

my car battery died because i left my lights on
so i charged it up to 50% on the charger thing
this mornin it started fine
but now it wont start

whats wrong?

2007-06-02 09:37:11 · 9 answers · asked by Anonymous

i have a 1989 chevy c1500 custom with a 305 and hugger headers and need to figure out if i truly need the cat to assist my flowmaster or magnaflow exhaust

2007-06-02 09:13:29 · 5 answers · asked by goodshot_1986 1

I have an Aftermarket Exedy twin disc racing clutch, installed 1 year ago. Havent had any problems until about 3 weeks ago. The pedal vibrates in each gear between 2200 and 2500 RPM. Only vibrates when the clutch is engaged. Has a brand new OEM Throughout Bearing installed with clutch last year with clutch. Clutch has about 7000 miles on it.

I am guessing either the Through out bearing went bad or a broken spring on the pressure plate. Not sure though. Dont want to tear into the clutch because i dont have a hoist and it pays 12 hours according to Alldatapro.com.

All help is appreciated

2007-06-02 09:05:57 · 2 answers · asked by drewblueeye 1

I have to go to a smog test only station and I am concerned about my Nox reading as it was tested 2 years ago and barley passed. So, if i were to fail, I want to know which part may most likely be the issue? I would like to have it checked before i get it smogged.

2007-06-02 08:54:55 · 4 answers · asked by james h 2

it happends in first gear when i take off it feels like it dosnt get out of first and then at the very top of the gear it squeels when i step off the gas it stops . what the hell is that

2007-06-02 08:54:30 · 6 answers · asked by Hulk B 1

'94 Ford Explorer V6 4X4

I've asked mechs. about this and they all say it's not possible for ATF to leak into the engine, basically I must be an idiot who's not paying attention to what he's pouring and where. I agreed that it shouldn't be possible and assumed I made a mistake.

Since then I've changed my oil 6 times very carefully. Reading the labels and smelling the oil before pouring it in.

Also I have had to add ATF to the trans. about 1-2qt. per week.

When I drain the engine oil. there has been way too much and it's reddish and smells like ATF.

So don't bother telling me it's not possible and start looking outside the box and consider how it might be possible.

Let me repeat: THIS IS HAPPENING

How MIGHT it happen?

Thanks for anything you can think of.

2007-06-02 08:41:03 · 8 answers · asked by Joe 4

I have checked the fuses and relay but they are ok, is there a reset or another fuse at the compressor that will get it working again at least to recharge it??

2007-06-02 08:38:08 · 3 answers · asked by up3fan 1

2007-06-02 08:36:19 · 5 answers · asked by xartinu33 3

2007-06-02 08:26:36 · 2 answers · asked by b0b_marl3y_luva 1

does anyone know a good site for a 1990 buick lesabre window wiring diagram as my panel came off i need to re wire it so my windows and mirriors work

2007-06-02 08:23:42 · 3 answers · asked by oneofakind187 1

theres no check engine light. its an automatic transmission. 170k miles.
when i start the car it starts idleing bad. when i start driving it
stutters when i accelerate but when i floor it the stutter disappears but when it shifts it pops into neutral and the rpms go way up until it catches the next gear. so basiacally, i would like to fix the bad idle, once the bad idles gone im sure the other problems will go away too.
i changed the fuel filter, all the spark plugs, all the spark plug wires. is it even worth me trying to fix it or would a shop be able to fix it? i dont want to pay 500 bucks to fix it because thats almost as much as i payd for it. thanks for the help.

2007-06-02 08:20:52 · 3 answers · asked by marcus m 1

just wondering if that would hurt anything

2007-06-02 08:19:31 · 2 answers · asked by rave_god2006 1

My 2006 Honda Civic is making a grinding noise whenever I turn right relatively sharply and at no other time. It is coming from the front, passenger side wheel. Any ideas on what it could be?

2007-06-02 06:34:14 · 6 answers · asked by arcaemous 4

I went to start my truck and got the click. my battery was fine and so i bumped my truck and got it home. went out and bought a new starter and replaced it.

the only thing i ran into while replacing was they wanted me to cut my exsisting ingition wire and crimp fit it into the wire that was provided and attached. so i tried but ended up having to twist the wire toegther. I started the truck and it ran fine for a good 20min.

I shut the truck off and when to start it again just to make sure and it wouldnt start just got the click. checked my tie and connection to the starter and it all looked good so im stumped... any help please!?

Thanks

2007-06-02 06:15:06 · 7 answers · asked by RADMOTODAD 2

Not to long ago I had a small accident on my Dodge Neon. I was going about 50 miles per hour on the road and fell asleep. I know it was stupid of me to do that. I woke up when I hit the side on the opposite side of the road. I was actually thrown up onto the sidewalk. I hurry veered back into my lane. When I got home I looked around for the damage. I had brutally hit the hub caps. One of the 5 bolts were missing that were to hold the wheel. On the side of the tire, I ripped some rubber off. Also when I was driving the wheel was wobble back and forth pretty fast, and a clicking sound was going on. Does anyone know what's wrong with it, and how I can fix it if it's fixable. Please, anyone, I really need the answer desperately.!!!!

2007-06-02 06:06:40 · 6 answers · asked by Igorek 3

Never had this happen before. 1989 Chevy truck, with a 700R4 tranny. When you first start it up, It'll go into gear, but makes a terrible chattering noise, then after a minute or so, nothing. No gears at all! Fluid is full. I have another tranny to put in it, but I was wondering if anybody might know, what the hell went outta mine, and If it's worth rebuilding?

2007-06-02 06:05:33 · 4 answers · asked by chris j 7

2007-06-02 06:01:36 · 12 answers · asked by Rico Fiasco 1

Mercedes benz 96' s-4520 trunk refuses to close?

could this be a fuse problem?

2007-06-02 05:52:17 · 4 answers · asked by Anonymous

I have alloy wheels and I can't get one to come clean. There was break dust on the wheel when the sprinklers got them wet. Of course it happened in the middle of summer in 120 degree heat. Now I have black water spots on the wheel that will not come off. I thought carb cleaner might work but I don't know if carb cleaner is safe for alloy.
I tried s.s. cleaner which did nothing. If I can't use carb cleaner whatelse can I use that is safe for alloy?

What is safe to use on paint with hard water spots? I have tried all the products that says it will remove water spots they don't work. I have also tried scratch removers and swirl removers which did not work. I have tried those decontaminating waxes to no avail. I have not tried those clay waxes not sure if I should. Any suggestions?

2007-06-02 05:52:07 · 2 answers · asked by whoknowswtf 1