Maintenance & Repairs - June 2007

The starter is in place when grounded and there is no turn at all on the starter both when grounded and not. Had a new starter on and the same thing happened.

2007-06-03 08:14:22 · 2 answers · asked by twoskee 1

Its a 1991 gmc jimmy 4door, 4wheel drive, 4.3L, v6, and it dosnt shift into park anymore but everything else works, everything is off, when it says its in park its in reverse and when it says reverse its nuturel and so on, please help thank you.

2007-06-03 08:07:32 · 5 answers · asked by skunk_wink 1

2007-06-03 08:05:51 · 10 answers · asked by always stayin fly 2

I got the starter replaced in december so I dont know, but...
I drove the car to lunch, got outside and it would not start.

When putting in the key, I get plenty of juice. the lights come on good and bright (and do not dim when I turn the key). the power windows are getting enough juice.

We attempted to jump it, and it did not work.

When I turn the key I get a single "click" and nothing. The car does not attempt to turn over. Not even part of the way. Just one solid "click" and that is it.

The dashboard lights, as normal, turn off when I attempt to turn the key (as does radio etc) but the lights do not dim.

it is a 1993 lincoln town car signature series.

Could this yet again be the starter? What else could it be?

2007-06-03 08:03:17 · 6 answers · asked by boogie2988 2

my check engine light came on I just bought it about 2 weeks ago. its not flashing its solid. what could it mean and how pressing is it I get it looked at?

2007-06-03 07:58:11 · 10 answers · asked by clkcrawford 2

recently i had problems with my car. its a '98 rover 414.

whenever i put the clutch pedal to the floor in either reverse 1st 2nd or 3rd when it makes a crunching kind of sound and sounds like something is rattling. also if i drop down a gear to overtake or anything, when i push the throttle hard the car jumps forward and makes a crunching noise.

i think this is a clutch problem but need a second opinion, and if so what part of the clutch ?

any ideas on cost also ?

2007-06-03 07:56:35 · 3 answers · asked by Anonymous

Are these all good ?
i have a 1996 ford explorer are these all good items for them ? i dont have alot of money so i have to keep on a budget it has 148344 miles a 6cyl and 4wd its the sport

http://www.amazon.com/magnaflow-catalyti...

http://www.amazon.com/pennzoil-160554-10...

http://www.amazon.com/fram-hm3985-high-m...

http://www.amazon.com/fram-ca326-round-p...

http://www.amazon.com/bosch-4488-platinu...

http://www.amazon.com/little-tree-air-fr...


http://www.autozone.com/r,app345069/vehi...

http://www.horseheadspickapart.com/

I might get the battery from here i plan on getting a transmission from there to they are like $90 for the transmission and like $20 if i can find a good battery i will get it

2007-06-03 07:55:20 · 1 answers · asked by Anonymous

2007-06-03 07:50:34 · 6 answers · asked by Anonymous

I read that it may help dissipate heat & of course protect from corrosion. I f this is the case should I not also paint the heads & the engine case as well ? If not what type of paint should I use. Thanks, First Time Mechanic.

2007-06-03 07:49:44 · 5 answers · asked by mongoose 2

I'm going to replace all of my tires, and the current size I have now are 195/55R16. To my understanding, R16 represents rim size. So if I get R15 tires, will they fit on my current rims?

2007-06-03 07:48:19 · 6 answers · asked by Windowguy19 3

The blower fan will not turn on, nor will the air conditioner compressor. Is it a fuse?

2007-06-03 07:41:35 · 4 answers · asked by Brent H 1

The motor will turn over and spin freely. The car does not make any other unusual noises when turning over.

2007-06-03 07:38:06 · 5 answers · asked by Anonymous

2007-06-03 07:32:25 · 5 answers · asked by atlasnyc12 1

it is a 30 foot trailor im pulling it with a ford 250 super duty 4x4 about 6000 lbs for the trailor

2007-06-03 07:26:05 · 1 answers · asked by rhelmca 1

i recently put 22" rims on my dodge ram 1500 (4X2) and now my ball joints are no good. i was told that its because the upgrade in rim size. i was wondering if it is possible to install a heavy duty ball joint on the upper and lower to match the rim upgrade?

2007-06-03 07:22:35 · 3 answers · asked by Anonymous

2007-06-03 07:11:23 · 6 answers · asked by Alexandro M 1

2007-06-03 06:58:33 · 5 answers · asked by Anonymous

My car just stop on me. When I tried to crank it back up it sounded like the motor was rumbling. I just got full service on my car about 4 month ago and I'm suprised they didn't tell me it was looking bad. I just got this car a year ago it's a 99 pontiac grand am. Do anyone have an idea about this?

2007-06-03 06:55:47 · 6 answers · asked by Anonymous

a gadget to fix on to your car battery to improve power and emmissions

2007-06-03 06:46:59 · 1 answers · asked by bjmlewis 5

were purchased at a radio shack, and the sprint store itself. Do I take my car in to have it looked at? It's a 06 Pontiac G6. What could possibly be wrong?

2007-06-03 06:39:07 · 4 answers · asked by mis 3

I have a lady friend who's having a bit of a problem with her Honda.

About a month ago, she had her car tuned up. Plus she had the oil changed and put some fuel injector cleaner in it. Every thing ran great, until this weekend.

For some strange reason, she decided to put some more injector cleaner in her car, because she wanted to improve the gas mileage. And she remembers backing up over a bump and then the car jerked a bit. Now, the car is making knocking sounds and shaking, when she's idle. It drives almost the same, but she says that it's not as smooth as it use to be. So, the question is, has she messed up her fuel system?

I don't know what to say, other than to take it to a mechanic. Either that, or just run the gas out. But there again, that might not exactly solve the problem. So, did she make things worst by adding more injector cleaner to her fuel, after doing it previously? Or by shifting gears on that bump is what made things rough?

2007-06-03 06:34:07 · 3 answers · asked by fourdollars15cents 2

i recently heard the grinding sound and figured its my cv joints i was wondering how much that would cost to take it somewhere and also could it be the catalytic converter making the noise?

2007-06-03 06:19:58 · 5 answers · asked by Anonymous

2007-06-03 05:43:12 · 2 answers · asked by david196727 1

It's not very noticable unless you look closely.
Car is driveable, however i need to steer about 5 inches about 10'oclock to the left for my car to go straight. Do I need an alignment or is it something more serious?
(2005 Accord) and impact to tire was at about 10mph.
Thanks

2007-06-03 05:41:58 · 4 answers · asked by doreenlph 1

What all do I need to buy, What are the steps.....

Thanks

2007-06-03 05:20:30 · 2 answers · asked by burger59 1

2007-06-03 04:32:32 · 5 answers · asked by Anonymous

2007-06-03 04:29:22 · 4 answers · asked by rattlesnake_0069 1

i work on triplex pump which it take the moving from detroite engine.... during the pumping ...is it important to reach to the lock up converter lamp to turn on? and why?give me details plz

2007-06-03 04:06:02 · 1 answers · asked by Nour 1

2007-06-03 04:03:05 · 6 answers · asked by Tipster45 1

2007-06-03 03:50:22 · 6 answers · asked by cowboy 1