Car Makes - September 2007

Right i lost my car keys,the car is locked,its a Renault Laguna.I bought a key off ebay,now the key does not open the car.So i have phoned Renault who said they may be able to do it,but how do i get the car to them?and if they can't do it,they keep my money as well, If i brake open the car,shall i try and re code it?do i need to change the inside bits ont he key fob? Is the key useless? Are all keys differently made,or is it just the inside nits that are different? I am really stuck here of knowing what to do next,any advice?

2007-09-15 00:18:40 · 2 answers · asked by jason t 2 in Renault

I had it tested at a local A/C repair shop (that my dad is friends with) But I don't think that they really looked at it... They told me that I needed a new compressor, and its around $900.00 to fix!!! Does this seem a little high to anybody else, I have had a compressor replace before (in different cars) and it has never cost me more that $500.00. I don't want to get ripped of because I am a young woman, and live in a small town (we only have the one A/C shop hear!)

What do you suggest I do???

Thanks in advance!!! ;)

2007-09-14 21:29:23 · 7 answers · asked by ஐ♥Kaylee's mom♥ஐ 4 in Dodge

Howdoes a '99 VW Beetle drive; particularly in the snow?

I found a used one for 7,995 with 75,000 miles on it.

I'm a bit weary as i'm looking for something with as few miles as possible; but this seems like a good bargain.

2007-09-14 21:05:37 · 6 answers · asked by Ryan 1 in Volkswagen

I have 07 2.5sl altima and it comes with a normal headlights. I want to make these hid, but I want my headlights in oem. If I want my hid headlights in oem, do I have to buy the whole headlights or just some oem hid kit? How much is the whole hid headlight? Where can I buy it?

2007-09-14 20:03:02 · 2 answers · asked by gordon21704 2 in Nissan

i have a series 1 rx7 standard 12a i just want to put a small turbo in it. i was thinking of a t25 turbo whats the average cost of that. what else do i need to convert it like do i need to change the brakes radiator etc?

2007-09-14 19:24:22 · 1 answers · asked by Anonymous in Mazda

2007-09-14 17:41:51 · 8 answers · asked by Mike T 1 in Other - Car Makes

I test drove one today and nearly wrote them a check I wanted to drive the 08 sti wagon first

2007-09-14 16:08:40 · 5 answers · asked by bornwith3nuts 2 in Subaru

what size of tires can fit on a 95 dodge ram laramie 4x4 diesel? right now there are 245/75R16 but they look so small on it that it looks funny, i would like something bigger but i don't want to sacrifice control or too much mileage. any recommendations?

2007-09-14 16:01:04 · 6 answers · asked by Tim C 5 in Dodge

I changed the fuse and it still did fix my problem

2007-09-14 15:57:08 · 14 answers · asked by Adriana G 1 in Jeep

2007-09-14 15:43:08 · 5 answers · asked by R T 1 in Ford

is 130 dollars for a performance chip a good price , giving me a 6% horsepower gain?

2007-09-14 15:19:47 · 6 answers · asked by Anonymous in Chevrolet

2007-09-14 15:18:50 · 12 answers · asked by SOLO 2 in Ford

and how would it cost for getting all the seats gone

2007-09-14 15:08:25 · 5 answers · asked by chris s 1 in Chevrolet

They make a whinning noise, especially when coming to a stop. I think it's only the automatics. I can be walking down the street and hear when one of these cars is near me. I've heard it on:

Caravan
Sebring Convt
sebring
Cirrus
Eclipse
Mirage

It makes the cars sound very cheap!

2007-09-14 14:44:59 · 6 answers · asked by J Rock 2 in Chrysler

for around 18k

2007-09-14 13:38:27 · 11 answers · asked by Anonymous in Subaru

can somebody tell me when was the very first time the chevy camaro built , because i heard someone saying that was in 1964 is that true ????

2007-09-14 13:35:43 · 9 answers · asked by freesmile 2 in Chevrolet

My dad owns a wrecker service and has given me a 2000 Dodge Ram 1500 Pick up 5.2 L V8. The truck runs great, but the brake pedal mashes all the way to the floor. The truck has been sitting up for about 3 months now. There is brake fluid (full) but the gasket under the cap was torn. I have been told there may be air in the line and should bleed the lines. Is this a waste of time considering that the reservoir was full or should I try this before replacing the master cylinder or booster? What should I look for to make sure it's not the master cylinder versus the booster? Thanks for all who help!!

2007-09-14 12:19:38 · 4 answers · asked by cathygirl32 5 in Dodge

2007-09-14 11:55:02 · 4 answers · asked by Anonymous in Volvo

Okay.. so I know the bottom part of the seat will fold up for more space.. but can the top part of the seat fold down...It has pull straps on it and I think the mannual says it will come down but I can't get it to budge.. I have researched it but still can't find any answers.. does anyone know? I need the top part of the seat to fold down haha..

2007-09-14 11:33:53 · 4 answers · asked by Alice S 1 in Chevrolet

2007-09-14 11:22:43 · 5 answers · asked by crusiers2 1 in Chrysler

do i need any special tools?

2007-09-14 10:59:48 · 2 answers · asked by Anonymous in Nissan

I recently ran into a 1970 Pontiac Le Mans 4dr.,hard top.It has a 350 2bbl with 96K miles, and the guy wants $700 for it, It has all the original chrome except the back "LeMans" on the panel.It also has some cracks in the dashboard but what 30+ car doesn't. Is this a really good deal or am i just getting sucker'd? Just thought i ould just get some "expert" advice.

2007-09-14 10:37:52 · 7 answers · asked by Anonymous in Pontiac

2007-09-14 10:28:27 · 2 answers · asked by Anonymous in Toyota

My 1985 Toyota Mr2 will not shift into gear when it's on.

I had originally thought the problem was air in the clutch system, but when numerous attempts to bleed it did not work we replaced the Master Cylinder, Still nothing, next we put in a new clutch kit, and still..

I can't get my car into gear, and when i do it takes a lot of grinding/rev matching to do so.

There's a possibility of it still being air in the system, but at the same time i was wondering if anyone would have insight on if it could even be the Transmission it self?

It shifts smoothly when the car is off & ran perfectly for the first few days i had it..

But this has become one hell of a frustrating situation, any help/suggestions would be appreciated.
All of a sudden it wasn't working and it's been up on jack stands since.

2007-09-14 10:20:44 · 6 answers · asked by Anonymous in Toyota

I have had this car for about 2 yrs. Drive about 80 miles a day... My right thigh hurts due to the uncomfortable seats. I have premium package with the better seats... still no help.

I've tried many variations but nothing seems to work...
(And I'm not a Giant... 5'8" 145lbs - but have long limbs)

Anyone else have this problem, any remedy?

2007-09-14 10:00:19 · 1 answers · asked by Neo 3 in Infiniti

i just bought a 99 black chevy cavalier and it has ugly protecter grey bumpers. I really want to get new bumpers just to the original 99 model where can i find them internet sites? or stores ???? thanks

2007-09-14 09:53:53 · 5 answers · asked by EMFE 1 in Chevrolet

She told me that the steering or the car swerves to the RIGHT. She was right. 2 days of owning/driving this van I I noticed that It swerves to both left and right.

Brought it to a dealership and had the ALIGNMENT done. They said the Alignment is prefect and that the tires are wearing off evenly (all 4)!

When I drove it back home - it still swerve to the right and left. But I guess more obvious to the Right.

Well. I had the tires switched again and the problem seem to stay.

They said it needs new tires but ALL tires are like 5/32.

I'm tired of all this. DOes anybody know what the problem is and how to fix it?

2007-09-14 09:33:43 · 3 answers · asked by reddtor 1 in Toyota

.. now the truck turns over but wont start.. also the volts meter says 0.. like my hud.. nothing works when i turn the car on.. on. is my fuel pump not getting electricity? my stereo works... power seats work.. windows work...

2007-09-14 08:47:23 · 2 answers · asked by midi_junkie 3 in Chevrolet

I purchased a 1991 Civic that needs both rear power window motors replaced. I found the same car at a salvage yard and tried to pull the motors but cannot figure it out. I removed all of the screws holding the motor to the door but there is one more bolt connecting the motor to the window. The problem is I cannot reach it because the window in in the "closed" position. How can I lower the window so that I can access the bolt? OR, how do I remove the bolt with the window closed?

2007-09-14 08:41:42 · 1 answers · asked by David L 3 in Honda

I cannot seem to find these anywhere. I have searched many places. can you help?

2007-09-14 08:22:01 · 4 answers · asked by Doogle Magoogle 3 in Chevrolet