2007-09-14 11:22:43 · 5 answers · asked by crusiers2 1 in Cars & Transportation ➔ Car Makes ➔ Chrysler
Well, the obvious answer is; Drive it. If you need repairs and want to drain the tank, you can go to your local automotive store and buy a siphon. DON'T use your mouth to get the siphon started unless you like the taste of gasoline. Drain it into a gas can and set it aside for future use: Maybe in your lawn mower.
2007-09-14 11:36:46 · answer #1 · answered by MikieB 4 · 0⤊ 0⤋
Chrysler in their infinite wisdom ,saw fit to install a small 3/8 pipe/hose on the gas tanks. that allow you to drain the fuel without actually doing nothing other than removing the rubber cap and connecting a hose. look around the front of the tank for a short pipe with a rubber cap and clamp on it. Hook up the hose and start to siphon. It will suck all but about 1 gal
2007-09-15 01:22:56 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You can usually go up underneath and disconnect the large, rubber fill hose at the tank and go in the tank with a siphon hose. Or you can disconnect the supply hose at the fuel rail and pull the fuel pump relay and jump across the plug-ins (two largest cavities) and let the fuel pump pump it out.
2007-09-14 18:45:16 · answer #3 · answered by Jackolantern 7 · 1⤊ 0⤋
You have to remove the gas tank ,,then remove the fuel pump that's on the top of the gas tank,, then empty it out, because it has a screen in it and You can't sipher it out,
2007-09-14 18:39:37 · answer #4 · answered by D C 1 · 0⤊ 0⤋
if u wish to degas remove and flush with water for some time .
2007-09-17 08:25:10 · answer #5 · answered by Anonymous · 0⤊ 0⤋