Maintenance & Repairs - September 2006

i own 99 mitsubishi eclipse with manual transmission.
until 12 hours ago my car seemed to run pretty smooth.
but today morning when i start it, it wouldn't get into the gear.
i had to force the gear stick into the gears. Also i noticed that when i was in reverse gear, releasing the clutch very slightly got the car moving more than usual.
1. Does it look like something with the clutch ?
2. How much money i might be looking at to get it repaired depending on what it is?
3. I go to greg's japanese auto, in chandler, arizona. They're quite expensive though. if it's a clutch thing should i go to someone who specializes in those. do you know anyone in arizona who work's with clutches, gearboxes e.t.c ?

2006-09-29 07:11:08 · 5 answers · asked by vishal_405 1

after the change i no theres 2 plugs not firing its running bad when i first start it & the engine light comes on it will go out & run good after ribb it up 4-5 times any help

2006-09-29 07:08:25 · 3 answers · asked by ann_7669 1

Two weeks ago my Renault Scenic (2002) decided to die. When you turned the ignition, the warning lights came on as normal but the engine would not turn over. Compeltely dead. I tried the usual jump start etc, but nothing, so got it towed to the garage. They subsequerntly told me it was starting in neutral (yes, it's automatic), and they'd check to see if it was the inhibitor or central electrics unit. A week later they sent it back, having found nothing wrong but with a bill for £150.

This week it did the same again, only this time it won't even start in neutral. I've tried to locate the starter motor, just to check it's not a problem with that, and it is well hidden. My manual has a really tricky procedure for removing it, so I'd rather not if I can help it. At the moment though I want to test the circuit, to check if it is a dodgy connection, but unless I can get to the solenoid I don't think I can. Perhaps that isn't it either.

Anyone experienced the same problem?

2006-09-29 07:01:56 · 5 answers · asked by gingajim 1

I have basic tools, common sense, and less money than I'd like. If it's easy and worth my time, I'd love to do it myself rather than bring it in to a shop, but how is it done? Is it simple? Thanks!

2006-09-29 06:53:09 · 7 answers · asked by Anonymous

Hi!

I'm looking for a really good source for OEM and other replacement parts for my 1967 Chevy Fleetside Pickup. Wheels, Glass, Sheetmetal, etc. Been searching the web and found a 'few' but no one has the OEM 6-lug wheels for example. Any/all reliable information, links, etc.

Thank you in advance for your time and consideration.

:D

2006-09-29 06:51:57 · 6 answers · asked by Anonymous

2006-09-29 06:50:58 · 10 answers · asked by ? 1

2006-09-29 06:41:59 · 6 answers · asked by JOE T 1

I have a 95 mustang with a 3.8 v-6 engine in it. I need to replace it. I found a 95 crown victoria with a 4.6 v-8 engine. Can I swap these out? I know about needing another tranny for the v-8. But would there be alot of extra work involved? Help out please. I need some answers quick. Thanks.

2006-09-29 06:36:12 · 4 answers · asked by Metal 4

I have a small 4 door sedan. I was wondering how much it would cost to have a wheel alignment done on it. I want to do that first and then get some tires next payday. So for the alignment alone..how much can I expect to pay?

2006-09-29 06:27:46 · 8 answers · asked by T J 2

Hi, I own a 2000 cavalier z24 2.4L I am installing a aftermarket tack could someone tell me were the pcm is, I have come to the conclusion that it is the whit wire from what i have seen i just cant get a definet location of the pcm(powertrain control module) any help please.

2006-09-29 06:22:12 · 5 answers · asked by zombie_002 2

Or is it a chemical thing. Do I keep using the compound , buff shine compound buff shine until no more black or will it always be black.

2006-09-29 06:10:01 · 3 answers · asked by sweet pea 3

2006-09-29 05:51:20 · 7 answers · asked by lr328 1

I am in the market to buy a minivan because of family size, and I found one that is a good price but it says it needs a short block. What kind of pricing and labor would this entail if I were to get something like that fixed?

2006-09-29 05:31:46 · 9 answers · asked by jennnnn 4

2006-09-29 05:16:21 · 10 answers · asked by Shay8587 1

I ask because there seemed to be something suspicious about my last visit. I won't go into details because I genuinely don't know if what I was thinking is true or not.

2006-09-29 05:02:29 · 2 answers · asked by Anonymous

Is it a job that can be done by a non qualified person, or is it a Mechanic job?

2006-09-29 04:50:13 · 7 answers · asked by Andrew P 1

Specifically the engine and carburetor

2006-09-29 04:45:49 · 4 answers · asked by Billy J 2

How do you adjust your ebrake? Can some tell me please

2006-09-29 04:39:08 · 3 answers · asked by Anonymous

I have a 1989 Cadillac DeVille. The emergency brake light on the dash comes on when I start the car even though the emergency brake is not engaged. The emergency brake "on" light will illuminate intermittantly while driving. Any thoughts on what is causing the "idiot light" problem and what needs to be done to correct the problem?

2006-09-29 04:19:15 · 12 answers · asked by Anonymous

I have a 1996 Saturn SL1 and a man told me I have to change the relay for the cooling fan. I went to Advanced and got the relay. Got under the hood, pulled the old relay out and plugged the new relay in (while the car was running), but it hasnt made any difference. He said the reason he knew the relay needs to be switched is because it was extremely hot to the touch. I was wondering if there is some special step to the replacement of the relay that I failed to perform?
Perhaps, The relay plug needs to plug in a certain way? (positive and negative) Thecar need to be off? the battery unplugged?
Help!!!
When I'm in stop and go traffic the car starts to overheat badly because the cooling fan isnt working. Could it be the big green fuse for the cooling fan?

2006-09-29 04:12:48 · 6 answers · asked by Anne E 2

Anyone know how to change the oil in the Volkswagon Superbeetle 1973?
Or where I can find out?
THanks

2006-09-29 04:12:35 · 5 answers · asked by dayapibu 2

My company is looking into switching our company trucks because the Powerstrokes are letting us down lately. We need something for towing that has good power and won't leave us on the side of the road.

2006-09-29 04:05:27 · 8 answers · asked by justhoughtidcheck 2

I have a 1997 dodge neon that is not idleing correctly and i just started all of a sudden. and I dont have the money to take it to a shop and pay a million dollars.

2006-09-29 04:01:38 · 8 answers · asked by chanelliey 1

i have a 1974 dodge challenger that is having electrical problems. I have replaced the alt. and the voltage regulator,and i have put a new battery in it and battery cables. i have also checked the wiring and they are not corred and all tight. What eles could be making it not charge??

2006-09-29 03:51:18 · 5 answers · asked by ben j 1

i have a 98 chevy cavalier that is squeaking it seems as thou its coming from the drivers side. I had the rotors and brake pads changed about a year or so ago. it only squeaks when driving slow. it doesn't squeak going over bumps. any information would be appreciated.

2006-09-29 03:31:53 · 4 answers · asked by keybrad 2

2006-09-29 03:10:47 · 38 answers · asked by Jim C 1

Apart form get a new car advice, I wonder can anyone suggest how to make an engine start again. I have changed the plugs , sprayed , some instant start stuff into the Carb and wiped the plugs, But she still wont start. Funny thing when I spray the instant start thing into the carb , it sounds like it wants to start more than if I let the stuff evaporate. Any ideas

2006-09-29 03:03:46 · 22 answers · asked by John H 2

I bought it from a private party can I legaly do something ? I got the diagnose from A hond/acura speciallist please help

2006-09-29 02:56:15 · 5 answers · asked by socorro c 1

im shaping my trunk and i was wondering if i can fiberglass over duct tape ? or use the duct tape for shaping and fiber glass it in there

2006-09-29 02:47:59 · 3 answers · asked by dj_skirmish_dj 1

2006-09-29 02:35:33 · 4 answers · asked by coachterri2003 1