Car Makes - July 2007

2007-07-12 11:03:02 · 10 answers · asked by david b 1 in Toyota

I pulled the starter and took it to advance auto and had them check it out, it works great. I check all the fuses under the hood and in the glove box, fine. I check the voltage across the starter and it has 12v all the time it doesn't mater if I turn the key or not.

2007-07-12 10:31:01 · 3 answers · asked by devousmc 1 in Chevrolet

i have a 07 maxima and it has halogen projector headlights and i want to upgrade it to xenons

2007-07-12 10:29:55 · 5 answers · asked by james 2 in Nissan

i didnt get the owners manual and i dont want to break any thing.

2007-07-12 10:18:16 · 4 answers · asked by moonlightknight5 2 in Ford

What do they usually "throw in" to intice you?

2007-07-12 10:13:39 · 4 answers · asked by Anonymous in BMW

2007-07-12 10:02:32 · 2 answers · asked by Anonymous in BMW

I have a 1997 ford taurus. I have power windows in it and i cannot get the windows to roll down on their individual switches. I can lower all the windows with the master switch but the individual switches are not lowering them. I replaced the master switch and that didnt do anything. I dont think there is anything wrong with the individual switches because when i lower the windows with the master switch, i can stop the window from moving if i push down on the individual switch on the window i am lowering down. All the motors are working fine in the windows also. Please someone help. Thanks for your answers!!

2007-07-12 09:53:53 · 6 answers · asked by Anonymous in Ford

Ok, I have a 1999 Ford Winstar with power locks and windows BUT it did NOT come with keyless entry. So, I got a keyless entry control module (with 2 fobs) from another 1999 Winstar off of EBay. I went to install it in the location (behind the glove compartment) where the factory keyless module would be if my van had originally been installed with it hoping the wiring would be there by default. It wasn't.
So my question is does anyone know what type of wiring harness(es) I will need? There are three places on the keyless entry control module to plug into. AND where the wiring harness(es) would, in turn, get wired into?

I've checked all over the internet and can't find any more info than what I already know.

Any other info/help you may have would also be appreciated!
Thanks!

2007-07-12 09:45:45 · 4 answers · asked by j_bryon 4 in Ford

any details i know its early

2007-07-12 09:26:48 · 2 answers · asked by Anonymous in Ford

2007-07-12 09:16:56 · 5 answers · asked by code lyoko 1 in Nissan

So my 1994 cherokee has been diagnosed with a Viscous Coupler that is going out on me. I know this is in my transfer case, but how serious is this problem? Do I replace the Viscous Coupler, or the whole transfer case? How mechanically inclined must I be to do this?

2007-07-12 09:14:28 · 5 answers · asked by Andrew R 1 in Jeep

and if i install an 4 barral in my 400 engie cid will it make it go faster?..right now i have an 2 barral..trying to get some idea of how to mod that 400 without doin too much or speadin too much money

2007-07-12 09:13:54 · 2 answers · asked by Anonymous in Chevrolet

A while ago i threatened to take ford to court because they wouldn't stand by their warranty terms.
My grievance was that they wouldn't replace the wheels on my car as they had got marks on them because the varnish had broken down and water had got to the alloy.
Anyway it seems my threat of a law suit worked as they are now going to replace my wheels.
After all that , my question is,am i within my rights to ask for a years guarantee on the new wheels?after all if you have a new pump fitted to your washing machine then it's guaranteed for 12 months isn't it?

2007-07-12 08:50:48 · 8 answers · asked by Anonymous in Ford

Even though I grew up in the muscle car era, and my Dad owned a 427 69' Stingray, I personaly don't see the attraction to this era, and wanting to relive this time. Vietnam, Watergate, anarchy in the streets from the Civil rights movement, Kent State, Arab oil Embargo, we fired God from the classroom(which contributed in many ways to a morally and ethically bankrupt society we live in today).

The cars could not make a turn, brakes were awful, carbs that needed constant attention, 3rd grade tires, rear-ends that kicked out at the slightest bit of moisture on the road, and truck-based engines that sounded like they were going to blow up after 100MPH. My Dad's vette was shook like a moth stuck to flypaper after 110MPH.

Great garage queens now, but the good ol' days were not so great, and the cars in my opionion were even worse. As someone once said..."unsafe an ANY speed".

2007-07-12 08:33:52 · 21 answers · asked by Anonymous in Chevrolet

2007-07-12 08:30:16 · 4 answers · asked by puffdady43 1 in Ford

I looked into lowering my Corolla but the place i took it to told me i could only lower it 1inch because it already came lowered 1 inch from the manufacturing company.

2007-07-12 08:14:04 · 2 answers · asked by ☆MoNicA☆ 2 in Toyota

will a small 300-some hemi fit in a 91 civic hatchback.??? iknow it will cost alot but what about making it rwd too???

2007-07-12 08:03:15 · 9 answers · asked by Anonymous in Honda

Whenever I accelerate and build up speed in my car usually around 65 - 70 mph my steering Wheel shakes So much along with the Foot pedals, My Seat and the whole Car, any Ideas on what is the cause of this and what needs to be fixed

2007-07-12 07:57:18 · 5 answers · asked by Anonymous in Mitsubishi

I've been told that the best way to disable the door ajar alarm is to unplug the alarm maker under the dash for a for 2007 E-350.

I need a little help in locating it,as I am unfamiliar with it's location or appearance. All I know is that godawful thing is annoying and I want it dead. I wasn't able to find any schematics in the E-series owner's manual specifically pertaining to it.

Any help?

2007-07-12 07:54:42 · 5 answers · asked by Anonymous in Ford

i need to rent a car. would you consider the grand marquis in the standard, full-size, premium, or luxury category?

2007-07-12 06:52:33 · 4 answers · asked by Algore 2 in Other - Car Makes

I have a 99 F350 7.3L and i am looking for a remote starter to put in her.. Which ones can i use?? do they have to be specific for diesel, or do all all them work either diesel or gas engines??

2007-07-12 06:51:48 · 4 answers · asked by myownworkchief 2 in Ford

I saw this 2000 BMW 323cic with (amazingly) only 58K miles in it. Interior is perfect condition, has harman/kardon sound and the asking price is $16K. Does this seem reasonable?
Do any of you know if this is a good car or if you would buy it and why? I test drove it and the handling was alot better than some other similar older bimmers that I test drove with 80-100k miles in them. thanks much!

2007-07-12 06:48:12 · 3 answers · asked by SoCal007 1 in BMW

How much do antique licsence plates cost for a classic car.

2007-07-12 06:39:46 · 2 answers · asked by gordon 24 3 in Chevrolet

Ok. I have a 2003 Chevy Malibu and I can't find the VIN number on it. Please help me. =]

2007-07-12 05:59:35 · 9 answers · asked by Mackenzie R 1 in Chevrolet

2007-07-12 05:56:18 · 2 answers · asked by bowtiekmaro 1 in Chevrolet

2007-07-12 04:49:44 · 7 answers · asked by Mimi-Baby 1 in Volvo

Hi Guys, just bough myself a 96 (N) 1.9 Audi A4 TDI. When it gets upto 2000rpm a plume of black smoke comes out of the exhaust. I have changed the air filter but it still does it. Now a cant here the Turbo spin up either. could the turbo be on its way out?

Injector cleaner hasnt done anything either.

2007-07-12 04:49:27 · 14 answers · asked by jamesoliver 3 in Audi

i need to know if anyone knows of a site that sells a stroker kit for the 4.6L V8, prefferably with H beam rods and 10:1 compression ratio pistons or lower. im looking to twin turbo a DOHC aluminum block V8, and im afraid that the stock crank will flex to much at high revs. i plan on daily driving it, and in my opinion the rough idle is a fair trade for reliability.

2007-07-12 04:25:12 · 3 answers · asked by mechmunkee3 3 in Ford

2007-07-12 04:20:29 · 12 answers · asked by trick 2 in Peugeot

I have a r reg, twin cam, nissan almera SRI 1.6 16Valve. I bought it second hand a couple of months ago, but recently I have had a few problems with it. Whenever I stop (i.e. at a junction) the engine cuts out. It's starts back up straight away but , It's not stalling, it's just cutting out on me. Today, the revometer was going crazy, holding at 8000 revs and then the needle started going everywhere although the revs weren't.

is there anybody out there who knows what this could be at all please. xxx

2007-07-12 04:17:47 · 4 answers · asked by lil.gema 3 in Nissan