Car Makes - April 2007

car has 133k miles takes more than 15 mins to warm up,has rough idle

2007-04-26 06:52:48 · 9 answers · asked by BOB G 1 in Toyota

it always crank or turn over but one day each week it will not. when it does not start i have no fire at coil to distributor or at coil neither is gas coming into the carburetor. next day will start up and run for six days fine. i have replaced the control computer and the coil same problem

2007-04-26 06:30:21 · 5 answers · asked by spanky2be2003 1 in Chevrolet

we just put a timing belt on it and have it in time. It wont start and when you crank it for about 15 secs it shoots fire out the in take.The timing belt broke while driving maybe its bent valves?I have went to hmaservice.com to set the timing.Have everything right on timing.....Plz help anyone

2007-04-26 06:26:15 · 7 answers · asked by nowandthenandonlyme 2 in Hyundai

Thinking of trading my 98 corvette for a 2003 Porsche Boxster,anyone have an experience owning a boxster.Are they reliable expensive to repair.Are they a fun car to own.

2007-04-26 05:21:44 · 6 answers · asked by TimboCLV 2 in Other - Car Makes

She always says she not wealthy but don't you think you have to have some money to get a car like that? That's mostly for wealthy people, do you agree?

2007-04-26 05:19:12 · 7 answers · asked by Anonymous in Infiniti

2007-04-26 04:59:48 · 5 answers · asked by Anonymous in Ford

Is there a way to shut off the display of the Nav once you have already begun using it? The only way I have found to shut it off it to not touch it when I start the car...

Also, because I have Navigation does this mean I don't have homelink? It seems like the Nav microphone is where the homelink should be.

2007-04-26 04:20:28 · 1 answers · asked by Anonymous in Honda

so what do you all think of this car?

2007-04-26 03:58:25 · 11 answers · asked by bran0687 1 in Acura

2007-04-26 03:50:05 · 6 answers · asked by mark 1 in Mercury

2007-04-26 02:10:22 · 11 answers · asked by KOLO 2 in Other - Car Makes

2007-04-26 01:57:42 · 5 answers · asked by CHRISTOPHER L 1 in Ford

I have a 351C 2V in a 69 mustang. It willl start with just the turn of the key, you dont have to give it gas or anything sounds great, but when you put it in reverse or drive the idol goes way down and it dies unless you give it lost of gas. It has an automatic transmission. What might be wrong. I just bought the car and when i bought it was sitting for like 3 years all i did was replace the gas tank and put fresh gas in it and set the timing by hand & sound while in park.

2007-04-26 01:47:45 · 9 answers · asked by Alex K 1 in Ford

will it goes fast?how bout the insurance?

2007-04-26 01:33:05 · 9 answers · asked by ali-square 1 in Hyundai

Has anyone had problems with the lacquer coming off the wheels causing black lines and generally making the wheels look crap.And if so are they having trouble getting them sorted with ford

2007-04-26 01:32:12 · 6 answers · asked by Anonymous in Ford

Its been in 5 times for various warrenty work. we have now found out the bottom end is knocking and the engine needs to be stripped. I know longer want this car, are we within our rights to get our money back or the replaced for another one?

2007-04-26 00:50:09 · 5 answers · asked by louiseaap1 2 in Other - Car Makes

On my 1992 Volvo (200,000 miles), the driver's side is 3/4 of an inch lower than the passenger side at all times. When I sit in it, it goes even lower and the car looks lopsided as I drive around. Is this a suspension problem-- fatigued coil springs maybe? What would you recommend?

If you have a sarcastic answer... skip this question and go elsewhere!

2007-04-26 00:41:29 · 9 answers · asked by Wisdom??? 5 in Volvo

2007-04-26 00:19:28 · 5 answers · asked by yeswanth k 1 in GMC

I found a 1998 mitsubishi eclipse GS-T with 145,000 miles on it for 4000 dollers do you think it is worth the money

2007-04-26 00:14:16 · 9 answers · asked by ryan p 1 in Mitsubishi

have a bad camchain rattle have replaced tensioner,camchain,new inlet camshaft,all new lifters still got rattle any ideas are appreciated .When canged tensioner rattle wasnt there on start up left running for awile all was good turned it of went up and crowed how good i was started it up and the rattle was there again worse than ever gggggrrrrrrrr

2007-04-25 23:22:43 · 2 answers · asked by Anonymous in Nissan

2007-04-25 20:57:34 · 4 answers · asked by Anonymous in Dodge

the gas pedal and disabling the ESP? No brake pedal pushing.

2007-04-25 20:47:59 · 4 answers · asked by Anonymous in Dodge

Two questions:
Is this car a good runner?
Is this car noisy when driving?

2007-04-25 20:45:42 · 16 answers · asked by Andy C 1 in Volkswagen

im not sure what they are called but all i can say it is, a sort 0f 4x4 but also a pick-up. (mitshubishi animal is it????)

anyway due to the announcement that the tax has gone up to £400 a year on a 4x4, will this also be increesed on these 4x4 pickups?

are these motors im trying to explain classed as a pick-up or a 4x4?

2007-04-25 20:24:59 · 1 answers · asked by Anonymous in Other - Car Makes

2007-04-25 18:49:50 · 17 answers · asked by None 4 in Chevrolet

Would the u joints and springs for this truck be interchangable with an older 1990's Ford F350 4x4?
Thanks!

2007-04-25 17:59:40 · 6 answers · asked by zenladyohm 1 in Ford

2007-04-25 17:20:48 · 9 answers · asked by lissette r 1 in Other - Car Makes

Trying to remove the 4Cyl 2.4L KA24E Engine from the Nissan Pickup is very, very hard. It's a 1992.

Unbolted the Transmission from behind the engine. Removed the Starter, Unbolted the Motor Mounts.

The Oil Pan didn't want to clear the Front Axle, but we managed to jack it up onto the top of the Axle so it's riding it now.

But now the Engine is wedged. It won't pop out of there!

The Transmission and Engine appear to be uncoupled. You can see the Flywheel.

Should we shove the Engine back down and pull the Oil Pan off?

Dammit Nissan! This is not being friendly at all.

Any ideas?

2007-04-25 17:04:14 · 5 answers · asked by Anonymous in Nissan

I want one. I like the older versions better though, for some reason..like the '91-'93.

2007-04-25 16:40:34 · 15 answers · asked by Marilyn Monroe 1 in Honda

OK, I am looking for a black plastic part about the size of a thimble that has retaining wedges on the inside to hold the pin on the side of the clutch pedal assembly and retaining wedges on the outside to hold the pin on the side of the clutch pedal assembly into the eye hole of the actuator of the master hydraulic clutch assembly. Pretty much, pin attached to clutch pedal assembly fits into eye hole of master hydraulic clutch cylinder but falls out cause black plastic retainer is broken. I need a new one but nobody knows what I am talking about. Please tell me the part number or where I can find this thing.

Thanks

2007-04-25 16:21:29 · 2 answers · asked by Anonymous in Jeep

diagnostics have indicated a problem on this circuit, and ther are four circuits A, B, C, & D. Each Circuit is a Quad Driver Module that each module controls a number of componets such as iginition, fuel pump, etc.

2007-04-25 16:10:04 · 3 answers · asked by squirts3x1 1 in GMC