Car Makes - December 2006

2006-12-09 10:22:13 · 8 answers · asked by john b 1 in Volkswagen

On an H22a1, how much hp gain would i get from adding a turbo (t3 or t4 or t67)?

2006-12-09 10:11:08 · 5 answers · asked by Anton the Nordic Bard 3 in Honda

my 93 cadillac has Oil in the radiator... Not water in the oil.
i have taken off the top of the motor and to my surprise it doesnt have aluminum heads. It has metal. I guess my question is w/ it being metal heads do i need to have them checked to see if they are wharped? And if not can it just be the gasket? I used a magnet and it stuck to the heads so i know they are not aluminum.

2006-12-09 10:07:24 · 5 answers · asked by killinshel 4 in GMC

1993 nissan maxima

2006-12-09 10:06:18 · 4 answers · asked by Julian M 1 in Nissan

Ever since I can remember the front passenger side is lower than the right side. This makes the rear driver side higher than the other side. It pretty much sits uneven and I have seen other Hard Bodies with this same problen. . It really doesn't affect it's driveability, but it sure is irritating. I've asked around, but haven't gotten back the right answer. The truck has 200k and I plan to drive it another 200k, but I'd rather do it in a truck that sits level. Any guesses out there on how I can fix this? Thank you in advance. Take care

2006-12-09 10:00:29 · 5 answers · asked by Anonymous in Nissan

I have to get the hood open, so I can shut it all the way, I already checked my fluids.

2006-12-09 09:54:17 · 9 answers · asked by u2_fran2000 1 in Ford

I once owned a 1967 Plymouth Barracuda. (good memories)
I'm having a Mid life crises thing and want some ideas...I'm looking for ideas other than the usual Camaro or Mustang. Any ideas?

2006-12-09 09:51:12 · 20 answers · asked by steve 5 in Other - Car Makes

2006-12-09 09:39:46 · 3 answers · asked by Kiss My Shaz 7 in Other - Car Makes

Every ambulance I have seen in the United States was a Ford. Why not Dodge?

2006-12-09 09:39:16 · 15 answers · asked by Captain Moe 5 in Ford

I Have Been waiting for the local garage to get this part for about a Month, they keep saying its on back order. I hate to take it to the dealer you know your going to pay way to much, however I`m seeing little choice, anyone know about what it would cost at the dealer. Whats a fair price?

2006-12-09 09:32:56 · 5 answers · asked by GerryZ 1 in Ford

i've got 03 chevy cavalier and i will be getting 17" rims soon. I don't want that much gap between tires and wheelwells.

2006-12-09 09:31:51 · 5 answers · asked by bugda76 1 in Chevrolet

Subaru Impreza WRX or Mitsubishi Lancer Evolution IX.........


Which one do you like for;

Looks;
Speed;
Traction/Cornering;
Any thing else......



The Evo is obviously faster (as the Scooby is built to be cheaper), but the Subaru has a better AWD system and easily keeps up around backroads etc........
Plus I love the way the Scooby looks (more-so the 05 shape than the latest one) - the scoop is so much better than the little grills on the Evo. So, overall i'd say Scooby although for rareity i'd like to get an Evo instead, as everyone seems to have a Scooby where I live. Well, what do you think?

2006-12-09 09:27:58 · 30 answers · asked by Anonymous in Subaru

I have had issues with different check engine codes. I have an OBD2 scanner and recently found that I have both a P0171 and P0174 code. These codes are telling me that I am running lean on both banks of the motor. Problem is I don't know what would be causing this problem. I have also noticed that when sitting at a stop light, my engine idles funny. It will drop down to about 400 rpm and then go back up to about 700 or 800 rpm and sometimes bounce back down and then up again. Would this be associated with running lean? If so, what would be causing it to run lean?

2006-12-09 09:25:25 · 10 answers · asked by DangerRanger 1 in Ford

1995 ford windstar 230,000 mi .... last night my heater quit blowing heat then my temp guage pegged HOT, i replaced the thermostat today and still having the same problem, i refilled with 50/50 antifreeze/water about 1.5 gal seems to be full... could my heater core be clogged or ???????? any info on this matter would be great!!!!!!!! thanks, broke and carless

2006-12-09 09:16:23 · 5 answers · asked by stepbysteprichlou 1 in Ford

2006-12-09 08:38:19 · 3 answers · asked by jerry p 1 in Other - Car Makes

2006-12-09 08:36:35 · 6 answers · asked by My name's MUD 5 in Renault

2006-12-09 08:31:15 · 14 answers · asked by Anonymous in Ford

2006-12-09 08:18:37 · 3 answers · asked by darus121 1 in GMC

I have a 1974 plymouth gold duster that need a new k-frame. Was wondering where one might be found? New or used in good shape at a reasonable price. Prefer Texas locations.

2006-12-09 07:40:11 · 8 answers · asked by messed up car 1 in Chrysler

2006-12-09 07:23:20 · 2 answers · asked by turttle26x 2 in Dodge

2006-12-09 07:12:09 · 9 answers · asked by Will 2 in Audi

I have a 1987 Camaro V6 coupe. This started 2 days ago I was pressing on the gas as I normally do. Then it started making this loud clanking sound, now I have to use my big toe to push on the gas or it starts making it again. Unfortunately I still have to drive it though other wise I would wait till it is fixed. What it wrong with it???

2006-12-09 07:08:48 · 6 answers · asked by jules 2 in Chevrolet

the dealer gave me a 2000 version cd

2006-12-09 06:25:04 · 2 answers · asked by bobby b 2 in Mercedes-Benz

2006-12-09 05:49:21 · 5 answers · asked by captpete43 1 in BMW

IS IT WITH THE SPAIR TIRE THAT IS UNDER THE REAR OF THE TRUCK. I GOT THIS TRUCK WHEN MY DAD PASSED AWAY AND I FORGOT TO ASK HIM ABOUT THE JACK AND TOOL TO LOSEN THE LUG NUTS.

2006-12-09 05:45:42 · 12 answers · asked by BB MAN 2 in Ford

Good choice or not? Have been trying to get head around 'Specs' basically wanting to discover mpg (diesel). Has anyone got any views?

2006-12-09 05:37:28 · 3 answers · asked by Dr Watson (UK) 5 in Other - Car Makes

I recently bought a 1973 Lincoln Continental Mark IV.

2006-12-09 04:04:57 · 5 answers · asked by Bud V 1 in Ford

It is leaking at the base of the distributor. I have tightened all the bolts around it but it continues to leak. Any tips, tricks, or ideas for me?

2006-12-09 04:04:01 · 6 answers · asked by Anonymous in Volkswagen

2006-12-09 03:58:43 · 11 answers · asked by Anonymous in Citroen

2006-12-09 03:56:04 · 6 answers · asked by monique123p 1 in Ford