Maintenance & Repairs - April 2007

The keyless entry was lost for my 98 Ford Explorer. It was not a factory installed keyless entry. Is there a way i can just go buy a new one a program it to my alarm and keyless entry? What is the best way of doing this, myself or through a dealership?

2007-04-24 15:57:25 · 4 answers · asked by vucker4 2

Alright its a 1974 nova it needs a new transmission a new starter and thats about all it needs for the engine to run fine but it needs alot of interior work the bodys strait no rust no bondo it needs paint and i think some electrical work for like the radio and air conditioning let me know asap the guys trying to sell it for 2500 and he has edelbrock valve covers, an edelbrockair filter, glasspack cherry bomb mufflers me i dont think its worth that much but i was just trying to figure out exactly how much you guys would think its worth

2007-04-24 15:56:34 · 4 answers · asked by TherealmcCoy 2

or are some better than others? if they are in what ways are they better?

2007-04-24 15:48:51 · 6 answers · asked by joker83318 4

Here's the issue - Fan won't work at all unless it is on THE very highest setting. If I turn the heater on (with the fan at the highest setting), the heater works. The AC does not. If it is the blower motor, why does the fan at least work on the highest setting? And if it's the AC, why does the fan not work at any of the lower settings? I'm bewildered. What is wrong with my car? The only thing I do know is I'm roasting...

2007-04-24 15:37:42 · 5 answers · asked by Anonymous

The red button is custom built into the interior of the car. And when you press it, it sounds like a whistle.

2007-04-24 15:33:44 · 6 answers · asked by accordtypek 2

has a 3.8 leter engin.

2007-04-24 15:15:41 · 2 answers · asked by Anonymous

The first time I bled my brakes, I did not check the fluid level and I ran it out. Then after checking here, I learned that I need to check the level after each valve is bled. The problem is when I open the cylinder, I hear the seal being broken and air releasing. Is this normal? If I attempt to leave cylinder lid off while bleeding, fluid goes everywhere.
Thanks for your help. It has been 15 years since I last did this...

2007-04-24 15:11:25 · 14 answers · asked by erok2020 3

2007-04-24 14:35:24 · 9 answers · asked by cherriee r 1

2007-04-24 14:35:08 · 3 answers · asked by turbo 2 1

....they don't just come on and stay on, they dont come on at all!
my tail lights come on with my headlights, I double checked all my fuses (under the dash AND under the hood).
Any ideas?

2007-04-24 14:34:57 · 12 answers · asked by smart@$$ 3

2007-04-24 14:21:30 · 11 answers · asked by bebysister 1

my friend and i were just jokin that were gonna mess with each others cars and stuff and i was saying im gonna sugar his tank and hes like im gonna put bleach in urs, and he swears that it works, i dont want to find out but does it work

2007-04-24 14:21:04 · 3 answers · asked by gopackgo51 1

something that work good and last

2007-04-24 12:47:21 · 4 answers · asked by cowboy 1

where can i find a 9mm nut?

2007-04-24 12:44:20 · 5 answers · asked by Dave F 2

Tested coil and plugs, getting good spark. Checked fuel pump and injectors, checked out ok.After cranking over for a bit, plugs were all wet, dried off and reinstalled. Smelled gas in oil, so changed oil. Timing is at 0 at TDC. Timing belt is ok. Checked all fuses, there ok. The only thing I haven't done is take a compression test. I'm lost on what to do next. The engine is a 1.6l 4ASE. Appreciate any help, Thanks.

2007-04-24 12:36:57 · 6 answers · asked by bbfelton 1

I have a 1950 ford F-1 and I upgraded it from 6volt to 12 volt can I still use the starting button?

2007-04-24 12:27:18 · 2 answers · asked by Runner88 1

2007-04-24 12:16:04 · 1 answers · asked by ogbootzilla 1

on my display I have a big green spanner saying maintenance due, I have already done my own maintenance. how do I turn this off. Please can anyone help.

2007-04-24 12:10:50 · 2 answers · asked by Brian P 1

This motor is a 1968 Evan rude boat motor. It is Five horse power, has new points, new plugs, new gas line, and a new carburetor (rebuild kit), but won’t run unless in full choke. Any ideas on how to correct this problem???

2007-04-24 11:26:40 · 3 answers · asked by Anonymous

I don't know how much it will be but imagine it will be $2000 or more.

2007-04-24 11:13:42 · 3 answers · asked by X 1

I am attempting to change my rear pads on my 2006 Kia Spectra however the piston on the calliper wont close. What suggestion do you have to install my pads?

2007-04-24 11:08:19 · 5 answers · asked by Juan M 1

i heard you get big bucks for catalac converters ,and was wondering whats in them? & who pays the most for them?

2007-04-24 11:06:25 · 6 answers · asked by T&J hotrods 1

i have a car just found out that it had some recalls in the past. am i able to bring it to the dealer and get the recalls fix for free? or what do i to fix these recalls on my car? thankyou

2007-04-24 10:45:15 · 4 answers · asked by helloguy 2

I always heard it is suppose to be Red, but the color was an Orange color, it was clear, not cloudy, is this normal ? also what color is the brake, and power steering fluid suppose to be ? I drive a Ford Taurus

2007-04-24 10:12:00 · 7 answers · asked by 2teens2todds 1

We have a '94 Ford Tempo and my husband lets it warm up sometimes for up to 10 minutes (even on warm days, etc.). I think this is too long making it idle. What is the standard warm up time for an older car?

2007-04-24 09:36:58 · 13 answers · asked by Autumn_Rains 2

The outer lenses of the headlights on my 98 Taurus have turned yellowish with sun exposure. Other than total replacement is there anyway to restore or clean them?

2007-04-24 08:28:57 · 3 answers · asked by ericbryce2 7

I was in a car accendent and was hit on the passenger rear side. I had my car fixed (which took two weeks) but when I picked it up and drove it it shook when I pressed on the breaks. I did not have this problem before the accident. So I brought it back to the mechanic. He tells me the drum was put on backwards. Is this even possible? What other possibilities would make the car to shake? *Caviler-2004*

2007-04-24 07:00:11 · 10 answers · asked by antie 2

I need to change the front 2 because they make a clicking sound whe I turn my front 2 wheels

2007-04-24 06:51:03 · 6 answers · asked by Jesus E 1

2007-04-24 05:53:53 · 6 answers · asked by Thelma W 1

Well, My 1998 Ford Mustang (V6 & Automatic) is on the Fritz, Basically, the little panel that tells me what gear the car is in (Park, Drive, Reverse, 1st, and 2nd) is for some reason NOT lighting up anymore. So basically when I drive at night I have to turn on the light inside the car so that I can see what I am doing. I am nearly positive that this problem is relatively easy to fix, but I need advice on where to start and what to look for. I dont think it is a fuse problem because the majority of them are brand new... but I guess nothing is beyond the realm of possibility...

2007-04-24 05:41:37 · 4 answers · asked by Amart 5