Maintenance & Repairs - January 2007

2007-01-05 11:17:58 · 8 answers · asked by soupbone512002 1

i have a 91 chevy with a 305 and i recently put a timing chain and gears in and i set the timing and after i did that i started to get a knock and it did it under a load so i messed with it and got it to show a code and it was code 43 so i put an ignition moduel on and the knock went away and then tonight i was comin home and hammered on it and it started makin the tickin noise and then it just stopped and then the ses light came back on and its the same code so i'm lost anyone got an idea??

2007-01-05 11:14:07 · 8 answers · asked by Anonymous

2007-01-05 10:52:09 · 11 answers · asked by Femme Fatale 3

the problem is i cant find the spark plugs

2007-01-05 10:48:29 · 3 answers · asked by Joe H 1

Other then water what else could I use at home

2007-01-05 10:43:00 · 8 answers · asked by Love LA 2

I've changed water pump, belts, hoses, thermostat, heater core three times. It's circulating good, everything seems to be working it's just not making any heat. I have the radiator covered, the truck doesn't even heat up to 210. Any other ideas?? Im out of them!!

2007-01-05 10:37:46 · 7 answers · asked by Eric S 1

2007-01-05 10:36:07 · 5 answers · asked by jay 1

When i start the car from cold the noise is really bad but as the car warms up its not so bad and when i put my foot on the clutch the noise goes completley,
Also now everytime i brake or slow down theres a load kind of knock from the engine like metal against metal,
And the other day when i was driving i heard a noise from the engine kind of like metal bouncing around as if something had come loose,
The car is a 1996 mitsubishi mirage VIE saloon 1.5 DOHC.

2007-01-05 10:32:34 · 9 answers · asked by Anonymous

2007-01-05 10:24:03 · 8 answers · asked by Anonymous

2007-01-05 10:18:41 · 8 answers · asked by Anonymous

2007-01-05 10:18:36 · 7 answers · asked by caerae4rent 1

2007-01-05 10:10:53 · 2 answers · asked by CATHERINE BLAIR 1

Is there anything else that I could check. Have checked the sockets and all ok.

2007-01-05 09:44:42 · 11 answers · asked by Anonymous

2007-01-05 09:34:19 · 7 answers · asked by jrcjsc 1

I bought a 98 astra last week. I took it on the motorway earlier today for the first time when engine management warning light came on, does anyone know possible causes for this to happen??

2007-01-05 09:33:33 · 7 answers · asked by Anonymous

what is a good way to get rid of rust. i am stripping the rust down, but what should i put on the steel after im done? thanks.

2007-01-05 09:17:53 · 4 answers · asked by Anonymous

I recently replaced my battery and need to reset my trouble codes. Does anyone know how to do this? My van won't start. No spark. Tryied everything except replacing the computer.

2007-01-05 09:17:09 · 7 answers · asked by florence t 2

i drive a 96 toyota camary, stick shift and i hate waiting for it to warm. so i usually take off as soon as it reaches that little line on the temp. gauge, and it should be in the middle. what am i doing to my car?

2007-01-05 09:16:57 · 9 answers · asked by sam 2

2007-01-05 09:08:33 · 3 answers · asked by Gary T 1

what function is the rpm and will it harm my motor.

2007-01-05 09:08:06 · 3 answers · asked by Linda D 1

I have a 1989 volvo 740 and I keep seeing ATE and girling calipers. I was wondering if it mattered which type I got

2007-01-05 08:58:04 · 2 answers · asked by uascmack87 1

2007-01-05 08:55:52 · 3 answers · asked by Anonymous

2007-01-05 08:53:24 · 1 answers · asked by newfiecatgirl 2

I have a 2002 Ford Escape and today it started shaking (not bad but you could feel the shaking) when it sit's in park and or stoped at a traffic light. The RPM gauge bounces around (not alot / very little) but bounces none the less.and the check engine light flashes? Does anyone know what is wrong and how I can fix it? Is it an Idling issue?

2007-01-05 08:51:23 · 7 answers · asked by Beezer 2

Recently, my 2000 automatic V6 Camry started stalling, but not on a cold start (ie, not when its been sitting in the parking lot overnight, and I crank it for the first time in a while), but rather, after I've driven it some distance (usually under 10 miles, because everywhere I go nowadays is within 10 miles of each other), then park it somewhere (grocery store, etc), run inside and back out quickly (I'd say 2, or 3 minutes TOPS), then when I come out and crank it, it stalls. I have to crank it, step on the gas to keep it running (which doesnt always work), and quickly get it moving so it doesn't stall out.

This is the first problem I've had with my camry. Any ideas?

2007-01-05 08:46:14 · 3 answers · asked by Manu 2

I have a 94 Mitsubishi Diamante. I bought it about 5 months ago, and I have already replaced the brake & brake pads on all four wheels. When I'm in the city my car is perfectly fine but once I get on the highway and hit about 50 or so it begins to vibrate more and more as I increase the speed. What could it be? Is it the engine itself or the tires? Do I need to get my tired balanced or something? And how much would it cost?

2007-01-05 08:39:40 · 8 answers · asked by Thara Ros 2

I have a 98 Honda Civic DX, 4-dr sedan.

2007-01-05 08:27:42 · 8 answers · asked by Carlos C 2

its a 1998 the classic that everyone and there grandmother has, automatic, LS

2007-01-05 08:22:28 · 7 answers · asked by Donald S 1

accident-12/12/06
damage- $5500- metal frame, bumper, radiator
additional damage found later- +$1388
my geico insurance rep said it would probably be finished 1/2/07.
apparently a part was refused and another had to be ordered.
now they say maybe 1/12/07.
i didn't take the rental car option, can't afford one, and it's a b*&%# to get to work and school with no car for a whole month. do i have a valid complaint or is this just the way it is?

2007-01-05 08:20:10 · 8 answers · asked by Susan 2

In a 2000 I30 or Maxima? Is it very hard? I can get the motor for 65 bucks, the dealer wants 411.00 plus tax.

2007-01-05 07:57:49 · 2 answers · asked by SKC 2