Maintenance & Repairs - December 2006

2006-12-26 06:34:58 · 12 answers · asked by wherestheweightroom@?? 2

2006-12-26 06:17:44 · 11 answers · asked by Sylvia Brown 2

pixs would be a big help

2006-12-26 06:12:19 · 3 answers · asked by ductmaniac 1

the engine of my proposed vehicle is a pneumatic impact wrench ,the one we see in automobile garages for turning nuts.. these

are always run by a compressors operating parallely for the supply of compressed air ( fuel ).the specifications of the

pneumatic wrench that is thought to be as the prime mover (engine) are....
1.air consumption --- 6cfm(cubic feet per minute)
2.operating pressure ---6.2 bar (90 psi,pounds per square inch)
3.max torque --- 500 lb-ft (678N-m)
4.weight --- 4.6 Kg

the project should not include a compressor ,instead vehicle should be incorporated with a air storage tank .so it is

thought appropriate to use a well capacitated tank that can store compressed air at atleast 30 bar so that the vehicle could

run some distance..say abt 400 to 500 meters.
the storage tank specifications are
diameter-40 cm
length - 1 m (even though the tank has hemispherical ends the additional volume is not included)

2006-12-26 06:02:40 · 2 answers · asked by k_gunturu 1

2006-12-26 05:48:43 · 6 answers · asked by rainedrop61 4

I just got it yesterday christmas day when i download my songs to my mp3 then I listen to it for like 20-30 then then battery goes dead and I changed the battery about 4 time what is the problem??I make sure i didnt get no water on and it still didnt work which mad me mad I tried to listen to it this morning and it still didnt work, when I try turning it on it flikers like a light of some sort ,what could be the problem??Please tell me what I should do.

2006-12-26 05:45:20 · 4 answers · asked by ♥Mrs.SweetLove♥ 6

2006-12-26 05:42:04 · 8 answers · asked by Anonymous

2006-12-26 05:11:02 · 5 answers · asked by firesign_32 2

My fuel guage starts to jump around 1/4 tank then becomes useless. I belive it is the sending unit. Do I have to remove(drop) my fuel tank to get to it? Any other possible causes?

2006-12-26 05:08:42 · 4 answers · asked by bignjjoe 1

2006-12-26 05:05:22 · 5 answers · asked by SweetP 2

my AC unit froze up on my 95 sable ( 3.0 eng. ) and snap the serpentine belt.
Is it possible to get a belt made for a sable without AC so I would'nt have to remove the AC compressor ? THeir seems to be enought clearence to clear the clutch on the ac compressor. The belt routing diagram on the car shows with/without AC.

2006-12-26 04:57:45 · 3 answers · asked by shkvn 1

2006-12-26 04:46:42 · 1 answers · asked by tnckaran 1

2006-12-26 04:37:29 · 3 answers · asked by Anonymous

Because, I can't get to the actualy tank because of my bumber...
02 Cougar XR.

2006-12-26 04:17:34 · 5 answers · asked by Kristi 1

ALL FUSES AND BULBS OK INDICATOR STEM SUGGESTED AS FAULT ANY HELP APPRECIATED

2006-12-26 04:01:08 · 5 answers · asked by sandra m 2

It's isn't really bad like the engine's is completely on fire, but still smoke visibly rises from under the hood when the car is parked.

Usually this happens after driving around, doing about 50 or so for a few.

First thing I thought is the car may be overheating. However, the temp gauge in my dash reads normal. I suppose the possibility exists that the gauge is faulty, but I don't think so because when the car warms up it seems fine.

I know the serpentine belt needs to be changed but the smoke doesn't appear to come from there when I open up the hood. It almost seems like it's coming from the bottom of the car, but I can't really tell from where. I was once told since it's an older, high-mileage (175k) car that it just does that. Something about the oil burning.

Been to the mechanic recently for an oil change. When you get it, they do a comp check of your car. I wasn't told anything was wrong.

Again, since I'm not really familiar with this type of thing, I thought I would ask.

2006-12-26 03:52:02 · 6 answers · asked by B. 1

The driver side wiper of my altima stopped working and the passenger one works fine. I think the arm fell off inside the cowl box but I have no idea how to exactly remove it. Could anyone diagnose this problem for me and tell me how to remove the cowl box and repair it?

2006-12-26 03:49:37 · 1 answers · asked by br0hamus 2

When I first start driving they are a little soft. Then after a few minutes they lock up and it won"t move.

2006-12-26 03:30:40 · 4 answers · asked by Anonymous

i started my car this mornign and it sounded like a diesel engine and almost cut out when it was idling.the engine was jumpy and garggling. almost sounded like a mean v-8 motor with the popping noise. i turned off the car and restarted it. Sounded almost the same.idled for 2 minutes. 3rd start sounded alittle better and smoothed out back to normal. I drove in real heavy rain for an hour yesterday. Live in FL Temp is about 70. Nothing drastic. My thoughts were water getting in the gas somehow/ or i bought bad gas (but i drove 30 miles after i bought it with no problem.) I drove to work today and the car runs like normal. I did notice the temp gauge go up and down according the the rpm's though. Never hit the danger zone though. what do u think this could be?

2006-12-26 03:08:36 · 9 answers · asked by aligrespeq 3

switch can go in acc but wont go to the on or start position nor woll the gear shift lever move

2006-12-26 03:02:46 · 3 answers · asked by LESTER T 2

could it be the proportioning valve, rht front and both rears work fine.

2006-12-26 02:55:27 · 5 answers · asked by wmdchoppers 1

My windshield wipers have started to work less and less. It's only now bothering, but I'd like to improve their function. Should I clean them or should I replace them (they are 2 and a half years old).
Thank you!

2006-12-26 02:53:36 · 8 answers · asked by gonzyro 1

I have a crack in the windshield along the drivers side, it is getting larger, should I have the crack repaired or should i get the whole windshield replaced?

2006-12-26 02:02:15 · 16 answers · asked by Tyler 2

The heat does not blow good at all just a little bit of heat comes out not even enough to clear up the windows cant even see out them please let me know what it could be

2006-12-26 01:37:46 · 9 answers · asked by Anonymous

CAN I RUN THIS ENGINE ON SUNFLOWER OIL, ALSO WOULD SECOND HAND OIL FROM A TAKE AWAY BE USED, IF FILTERED TO REMOVE ANY SEDIMENT. CAN THE OIL BE USED PURE OR SHOULD IT BE MIXED WITH DIESEL, THIS ENGINE IS NATURAL, NO TURBO.

2006-12-26 01:26:12 · 2 answers · asked by STEVEN P 3

I have a 1999 Dodge Ram 1500 with the 318. The check engine light came on, and it started running like crap. A week later it doesn't run barely at all. Kind of sounds like it may be skipping, but when you hit the throttle it bogs down. Doesn't stall though. I replace the plugs/wires/cap/rotor, and this didn't help. Any thoughts?

2006-12-26 00:56:02 · 5 answers · asked by jrhoulejr 2

im looking into buying a engine rebuild and i was jw if an avg kits comes with all the gaskets? Also what does an avg rebuild kit consist off

2006-12-26 00:41:31 · 3 answers · asked by jeng3232 1

I have a 93 Chevy Fullsize Z71 Blazer, Im searching online for master rebuild kits and I would like to beef it up a little bit, Whats the diff between a roller cam and a regular cam, and also the diff between hydro lifters and roller lifters, I would just like some advice on a rebuild kit for my truck.

2006-12-26 00:13:00 · 6 answers · asked by jeng3232 1

Last night i got stuck in the snow and started to smell a rubberlike smell.Shortly after that, my car's power steering felt like very hard to steer. Do u think i killed my power steering pump??HELP!

2006-12-26 00:08:15 · 5 answers · asked by rainloose 1

i have checked all the fuses and they seem fine any ideas??

2006-12-25 23:33:34 · 6 answers · asked by Lewis O 1