Dodge

how much torque should it take? i have wired the pulley to keep it from turning but when i crank on the wrench the engine moves...still trying to get to the water pump

2007-10-10 08:16:22 · 5 answers · asked by Anonymous

My neon has faded headlights. I was wondering how to "clear" them up without buying new ones. Something simple, I do not have power tools or stuff like that. Thanks!

2007-10-09 17:38:05 · 4 answers · asked by Anonymous

Does anybody know if a racing chip or programer will give me some horsepower gain? And how do you choose the right type of headers?

2007-10-08 18:07:58 · 4 answers · asked by Anonymous

a week ago, this weekend when i stopped and then go from a stop signm, i heard a HUGE HUGE band under van like transmission... what could it be and can i return it, i wont keep it for sure now, im in canada so go by our laws please. i want them to find me sameone with no problems. i refuse to keep a car if a trainey problem, no warranty will change my mind..

2007-10-08 16:56:00 · 4 answers · asked by flowerlegz 3

I have a 99 Dodge Intrepid and it started running hot I left it there and had it towed to my house. It had no hose leaks and was still full of water. We need a new water pump and also fouund out that we need a tenison pulley on it. After fixing it I have oil coming through my radiator but no water in my oil. Everything was put back right. What could be the problem?

2007-10-08 11:13:52 · 10 answers · asked by SA 1

My car's engine malfunction light has been coming on, and I pulled the code by turning my key. The code P-1684 came up (it means the battery has been disconnected within the last 50 starts, which it hasn't been). What could this mean? I have replaced the engine, new fuel pump, starter, wire harness and had a tune up. I don't know what else to do with this car, or what is causing the code to come up.

2007-10-08 11:10:42 · 3 answers · asked by brooklyn152 3

It's only happened a handful of times, but every once in a while (3 times today) the car wont start on the first try.. It just makes a "click" noise and then nothing. I take the key out and try again and then it starts up fine. I'm absolutely no handy man when it comes to cars, So I'm not even sure where to start looking. And the battery is housed under the Air filter box (wtf?) so I can't really get to it. Thanks for any help yall can give!

2007-10-08 10:44:13 · 12 answers · asked by Dan Garcia. Spring, Tx 1

2007-10-08 07:09:28 · 4 answers · asked by tammymeee1 1

2007-10-08 02:45:02 · 3 answers · asked by roger m 1

2007-10-07 06:39:41 · 5 answers · asked by Tina l 1

I purchased the van about a month ago. It is a 2008 dodge caravan. It only has about 250 miles on it. I bought it brand new. I parked it and turned off the engine. I got out of the van and realized i should reverse a little more. I turned the key....and it sounded like the engine was going to start, but it didn't. The lights on the inside turn on. I am soooo confused. I didn't do anything weird or anything. I called road side assistance and they came and gave me a jump to see if it was the battery, but that didn't work.
I called the dealer sales guy and he didn't explain anything to me. He just told me to bring it in on Monday.
Can anyone one tell me what went wrong?

2007-10-06 13:31:07 · 11 answers · asked by searstower 2

2007-10-06 12:49:34 · 4 answers · asked by robski 1

2007-10-06 10:01:07 · 4 answers · asked by martha t 1

my brother just put a new throttle position sensor in his pickup cause a mechanic told him to. now sometimes it idles really slow and stalls. i think that you can adjust the TPS but he said he put the new one on in the same exact position as the old one came off. with the old sensor it idled like it should but the engine was surging in cruise controll going down the road and i think thats why the mechanic told him to change the TPS. and the new TPS fixed the surging now it just won't idle right and stalls. Any suggestions?

2007-10-06 08:14:52 · 7 answers · asked by jayandamber1@sbcglobal.net 2

He asked what it would take to make his a 1 ton. I said he would probably just have to add the two extra leaf springs on both sides of the rear axle. Does he need to do more?

2007-10-06 05:00:29 · 4 answers · asked by teton 4

2007-10-06 04:49:22 · 10 answers · asked by scott s 1

hi everyone i own a 2003 dodge neon sxt 2.0 ltr i recently had the motor just stop running on me all the sudden no noise or anything i checked the fuel pump and timeing and still nothing i just replaced the ignition coil on it yesterday hopeing it was that because there seems to be no distributer or ignition module i ussumed it was the ignition coil and replaced it and wasnt that either car turns over but doesnt seem to have spark im sure of it i pulled the plug wires off the ignition coil to see if there was any spark and didnt jump to anything so yeah im baffled if anyone has had this issue please help or if know anything about this car period would be appreciated tried of wasting money and getting nowhere thanks oh also checked all fuses and relays and all were good thanks again please get back to me hopefully someone with this vehicle has had this problem and can be of some good help

2007-10-05 22:03:10 · 4 answers · asked by lilnuggy 2

I have a 1997 dodge avenger and my driver side fog lamp is broken and i was wanting to know whats a good site that i could buy a stock replacement for my car

2007-10-05 20:40:45 · 5 answers · asked by Mrs.BETZ 2

2007-10-05 12:59:28 · 4 answers · asked by phillip d 1

2007-10-05 12:23:57 · 7 answers · asked by Lttlmssexy22 1

my friend says his 2005 was and that they bought it in 2005 but my dad says our 2003 is that they already had it and then sold it in 2004 so what is right?? anyhelp at all would help and a timeline would be awesome!!! Thanks

2007-10-05 10:10:43 · 4 answers · asked by Tommy 4

The low will go on and off for weeks at a time. I have checked all the fuses. The high/low switch works fine. All other accesories work fine. Has anybody had this problem? Both mechanic and dealer is stumped.

2007-10-05 09:47:41 · 5 answers · asked by Gus 1

does anyone know of some simple reasons it might be on? i.e easy fixes? ideas for me to check?

2007-10-05 06:40:43 · 12 answers · asked by private n 2

and now it wont start , i think it might be the head gasket but i would like to besure before i get it fixed

2007-10-05 02:43:14 · 6 answers · asked by demetrius_blackmon2001 1

i have a 03' Dodge neon SRT-4 it has a 2.4L Turbo Twin Cam Engine, and i have put almost 100,000 in it and it has 509HP but if i go all out i spin til 5th gear is there anything i can do to reduce spin? if someone needs to know wht upgrades i have just let me know and you can im on yahoo and ask me. best answer goes to most informative. thanks in advance

2007-10-04 17:29:02 · 8 answers · asked by Chris 2

what will i need to do to my 2005 Dodge Cummins Turbo, I raced a Z60 2005 vette. I beat him in the 1/4 mile drags about 2 car lenghts.

I want more performance by way of the TURBO and changing my exhaust system. I know this truck can be faster than a EVO 7 - 8 and WRX STI, turning a 10.47 in a1/4 mile @ 124.64
what do ya reconmend as for after market parts ?

2007-10-04 17:28:27 · 6 answers · asked by ? 4

I am interested in buying a 1997 Dodge Ram 1500. It gets 14 mpg city and 18 mpg highway.
Is there any way to increase the gas mileage of the truck?
It is a 3.9L V6 with 70,000 miles

2007-10-04 16:44:41 · 8 answers · asked by mcmittens05:) 1

I have a hyundai right now, but I was thinking of getting a dodge later on. I just want to know if that is a good move to make.

2007-10-04 15:15:30 · 8 answers · asked by matt j 2

2007-10-04 12:44:35 · 6 answers · asked by scooobycat2000 2

I have tried everything. I changed the brake pads, pasengers side caliper (it was craked) I even bled all the lines well the ones I could get fluid to come out of. I took the Master Cylinder Resivor off of the master cylinder to check that, dumped out the brake fluid and there was black stuff in it. I don't understand why my brakes worked before I changed them and now I have no brakes at all brake pedal goes all the way to the floor. I am not sure if it is the master cylinder (hope not) or maybe the hydralics is clogged or somthing. I have been at this now for 3 days baffled. PLEASE HELP!! Thanks in advance.

2007-10-04 09:02:17 · 5 answers · asked by Anonymous