Dodge

Injectors went out again. Giving me the run around, dodge will not tell cummins which fuel injectors, and cummins said there machine will not tell you which ones are bad,.I am still under the cummins warrant which is 90 days. Will they or should they replace them? This is twice it happened on the fuel injectors and the truck is only a year old. Can anyone help!!!

2007-10-04 03:39:19 · 5 answers · asked by Sara T 1

2007-10-03 20:39:47 · 7 answers · asked by sunshine 2

2007-10-03 12:30:56 · 5 answers · asked by bill h 1

It is a 98 dodge durango/SLT. It would cost me 1,500 dollars to replace the engine. I would probably end up selling it if I did fix it. Is it worth it or should I just give it to the junk yard and get whatever.

2007-10-03 11:21:46 · 7 answers · asked by nutritionist34 1

The sway bar has come "loose" in the hole that it is in. The mechanic said that it is only at the level of what he'd classify as an "annoyance." When driving I feel as if the car does not have as much control especially when I'm turning or traveling on a road that is not smooth. Does anyone know if this is normal the loss of control feeling and will it get worse?

2007-10-03 08:33:42 · 3 answers · asked by grrrbears 1

2007-10-02 21:31:39 · 3 answers · asked by sergio a 1

2007-10-02 13:54:13 · 15 answers · asked by MR E 1

How much horsepower can you get from a Dodge 3.9L V-6. Suggestions welcome beyond just changing the chip and without boring it out?

2007-10-02 13:39:48 · 4 answers · asked by opinionator 5

2007-10-02 11:55:17 · 6 answers · asked by ebangss 1

I have a 96 dodge stratus and when I come to a stop my breaks squeal. Is there anything I can do to stop this?

2007-10-02 07:55:12 · 5 answers · asked by Anonymous

Is there anything i can do about it; i have stabilizing shocks and the whole nine yards; that is supposed to keep it from being that way; yet its still very sloppy when traveling down the road. Any suggestions?

2007-10-02 06:32:39 · 7 answers · asked by razor 2

2007-10-02 04:37:41 · 2 answers · asked by Anonymous

I'm not looking for just a performance noise factor but real noticeable horsepower gains that is good for towing and also some fun. My truck now has 3:92 gears, auto. Are chips really good? How much h.p. do they really add? A full blown exhaust system-headers and duals, Is this real h.p. or noise factor? How about t.b. spacers are they good?My experience with cold air intake is noise factor not h.p. I would appreciate some feed back from someone who has tried different items and had a positive experience. Thank you...

2007-10-01 07:37:34 · 4 answers · asked by miscdebris2000 1

And are the light (brake and signal)wires for a hook up already there from factory and im looking in the wrong place?
I wont be pulling over 1800 lbs

2007-10-01 07:06:06 · 5 answers · asked by Anonymous

The truck does not quit completely, it just refuses to accellerate. To temporarilly fix it, I simply remove my foot from the accelerator pedal until the RPM reaches about 1,000 and the everything returns to normal until the next time, which may be in 2 mintes or 2 days.

2007-10-01 06:07:36 · 7 answers · asked by drove2long 1

is there anything that has to be swapped in order to back it work.

2007-10-01 05:45:42 · 8 answers · asked by mstinkey2 1

The Trailer is a 1999 Camplite by Damon Pop-up. We have everything to Tow this trailer but we don't have any brake control installed in the van. We think that the trailer does have the brakes but we need to make the connection from the van to the trailer to make the brakes work. How do we do this?
Thank you very much.

2007-10-01 00:45:24 · 4 answers · asked by chipmunkd 1

2007-10-01 00:01:26 · 2 answers · asked by janjanchara 1

2007-09-30 22:03:37 · 2 answers · asked by Little John 1

2007-09-30 17:12:32 · 3 answers · asked by Old Doc 1

2007-09-30 13:20:10 · 7 answers · asked by Steve R 1

thanks

2007-09-30 08:21:40 · 16 answers · asked by wade 2

2007-09-30 03:04:47 · 12 answers · asked by Saint Nearly 5

Ford F150's have the off road trucks called FX4
Chevy has the Z71 Off Road
never seen a Dodge Off Road Truck

2007-09-29 21:22:32 · 7 answers · asked by Anonymous

I believe I have a 239 V6 in my 1988 dakota, it's got a Holley carb on the top, which according to research should be a 6280.
The truck's too old and rusty to tear down into a project truck, but I'd like to make it a little more capable without spending more than 600 bucks. Just enough so I can pull the occasional trailer and get through everyday mud patches, nothing extreme. I'd also like to not nuke my gas mileage while I'm at it.(not sure if that's asking too much)
I'd really appreciate any advice, thanks! :)

2007-09-29 17:56:52 · 1 answers · asked by Anonymous

as soon as i stated it it smoked,i killed it,and started it again it didn't smoke.went all day didn't do it anymore,today nothing this morning but when i got off work it did it again. only lasts a few seconds then stops.

2007-09-29 15:09:15 · 6 answers · asked by Anonymous

Although I don't really know what knocking means, but, this car when running seems 'knocking'. I measured the compression pressure, they are 200, 200, 60, 200...aaah...3rd cylinder has problem. I poured a tea spoon of oil, rechecked the pressure, still 60, so, piston rings are not the problem. So, could it be the crankshaft bearing? and, also, the cause of knocking?

2007-09-29 14:47:23 · 4 answers · asked by James1982 2

2007-09-29 10:58:25 · 10 answers · asked by Anonymous

1996 dodge ram 1500 pickup, 318.

2007-09-29 07:03:39 · 4 answers · asked by cob32187 2

i have a fully restored 1969 Plymouth road runner it has a 383 V8 in it and it was pronounced by the guy who did it as-383 CID 4 BBL i need to know wht this means and please if you don't know or aren't sure don't waste your time best answer goes to the first "good" answer have fun and thank you in advance

2007-09-29 05:27:14 · 8 answers · asked by Chris 2