2007-09-30 22:03:37 · 2 answers · asked by Little John 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
In the manual it says change the steering knuckles. If that doesn't cure the problem, the axle housing is bent and must be replaced. On some models, the upper knuckle bolt was set off center and after loosening the knuckle rotated to adjust the camber.
I had a '78 and mine was not adjustable.
2007-10-01 12:48:34 · answer #1 · answered by eferrell01 7 · 0⤊ 0⤋
try taking the top nut off of it and look in and see if it had a 4 pronged screw in adjuster on it,if it does you can buy a socket that will adjust it.some of them had this,you may have to clean it out to see it but if it has it,you can adjust it with the socket ,advance can order you the socket for about 20 bucks,good luck with it.
2007-10-01 16:41:41 · answer #2 · answered by dodge man 7 · 0⤊ 0⤋