how much torque should it take? i have wired the pulley to keep it from turning but when i crank on the wrench the engine moves...still trying to get to the water pump
2007-10-10 08:16:22 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Dodge
Use an impact gun,air or electric should get it off,normal thread(counter-clockwise to loosen).
2007-10-10 08:38:25 · answer #1 · answered by CarmaNguyen 7 · 0⤊ 0⤋
Remove the starter motor and wedge the flywheel ring gear to stop the engine turning or if you are careful lock a vice grip on the crankshaft pulley and let it wedge against the engine
2007-10-10 15:24:31 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Yea, lefty Lucy, righty tighty. Buy wait! It can very easily break off if tightened TOO tighty. Been there, did that.
2007-10-10 17:12:30 · answer #3 · answered by Jackolantern 7 · 0⤊ 0⤋
lefty loosey-righty tighty. lol sorry not meant to make fun just the way i remember this. Good luck
2007-10-10 15:40:18 · answer #4 · answered by rodneyj 3 · 0⤊ 0⤋
clockwise if you are looking at the front of the motor.
2007-10-10 15:19:36 · answer #5 · answered by Chief 4 · 0⤊ 0⤋