Other - Hardware - April 2007

2007-04-04 07:04:17 · 13 answers · asked by Anonymous

Got a warning on my desktop. RTHDCPL.EXE illegal DLL relocation. Contact vendor for new DLL.

C:\WINDOWS\SYSTEM32\hhctrl.OCX

This stuff doesn't mean a thing to me. Is thus something I need to follow up on (or did the computer correct itself?) and if so with who?

eMachinesT6532 Media Center.

2007-04-04 06:53:13 · 4 answers · asked by I have a ? 2

My cousin spilt juice on my laptop and it fried. I recently got a new desktop and I wanted to know is their anyway of getting the information on my laptop’s hard drive onto my new desktop’s hard drive?

2007-04-04 06:33:40 · 3 answers · asked by Victoria 2

which one gives faster output single 512 module or 2 nos. of 256 double module RAM

2007-04-04 06:32:39 · 8 answers · asked by nirnirmal 1

2007-04-04 05:37:51 · 4 answers · asked by Anonymous

The ram i have is DDR 400 PC3200 and the mobo says it can run it. The problem is that the motherboard manufacturer released a liist of compatible/recommended ram and mine isn't on the list. Will it work.

2007-04-04 04:41:26 · 9 answers · asked by Anonymous

The other drives are working, have ran a startup disc and it tells me that the C drive is missing. If I try and change from D drive to C it will not change. How can I fix this problem? Any and all help will be appreciated.

2007-04-04 04:32:51 · 7 answers · asked by geralear 1

i put the recovery diskette in and it wants me to type something
A:/
i'm no programmer now.
I put in recovery cd it nearly goes through the whole process of recovering my pc then a message appears error not enough hard drive space. probably have even used half the space when it worked... Shall i just call out an engineer or buy a new pc?

2007-04-04 00:27:45 · 17 answers · asked by home1ygirl 1

PCI Express - ATI Radeon X550 (256MB) ? or AGP 8X - ATI Radeon 9550 (256MB)

2007-04-03 18:37:40 · 2 answers · asked by Armas 2

Computer Details:

Windows 98 SE Arabic Enabled Compaq
48.0 MB RAM
1.34 GB HardDrive

Reason:

Want to install Ubuntu...




If you don't know what you're talking about, don't answer. I hate spam.

2007-04-03 18:06:03 · 5 answers · asked by Anonymous

The best configuration as far as master/slave settings, where to plug in data cables (ide 0, ide 1, etc.) and BIOS settings?

I have XP Pro.

2007-04-03 17:53:43 · 7 answers · asked by Anonymous

i just bought battefield 2 the complete collection and when i start it up it plays the intro and then when you reach the page were you selcet your name my computer screen blink a couple of times than it say my graphic driver has stoped and it resets my desktop.i have a ati radeon 256mb graphic card and i don`t know what to do i spent 40$ on this game and i need help fast.

2007-04-03 17:44:31 · 3 answers · asked by sniper 2.0 3

2007-04-03 17:22:52 · 5 answers · asked by Anonymous

2007-04-03 15:13:50 · 6 answers · asked by Anonymous

in BIOS and install the latest driver for my IDE controller? Thanks in advance....

2007-04-03 14:29:37 · 4 answers · asked by ? 5

I recently purchased a new ASUS DVDr drive. It is the second optical drive i have installed, but my system will not recognize it. Please help. Thanks!

2007-04-03 13:37:49 · 6 answers · asked by **turbostance** 2

I'm planning to buy a converter for my PSU and this is what I'm considering to buy: http://www.outletpc.com/c6225.html. I'm afraid that it will not fit I modern HDs because they also sell this: http://www.outletpc.com/c6732.html. Which one should I get?

2007-04-03 13:33:49 · 3 answers · asked by ? 2

sorry first post >.<

ok.. something has been seriously messed up with my comp for a month it seems like. it all started out of nowhere i started getting the error message "missing or corrupt file hal.dll" i fixed that part by rebuilding the bootcfg and everything was fine for a while. but then out of no where whenever i restart my computer now it wont make it to the windows loading screen
and the only way i can get it to windows is when i go thru my xp cd and use the repair console and run chkdsk /p and /r after both of those have run it finally starts up but slower than **** ive tried scanning with various programs (i.e. avg hijackthis spybot s&d...) all have found nothing except for avg which says that ntoskrnl.exe has a reading error. ive been reading on this and it seems alot of ppl have problems with avg and the ntoskrnl.exe but mine seems to be completely different than their problems. they all get error messages at boot up and mine doesnt display anything. so PLZ i need help.

2007-04-03 12:39:37 · 3 answers · asked by tony 1

Yesterday i copied one of files from hard disk to pen drive... from then on i am getting a pop up balloon displaying warning sign - windows-Delayed write failed as its heading and the message telling - windows was unable to save all data for the file E:\autorun.inf. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.

Also from then on in 5 seconds intervel i hear brief creaking sound from the hard disk.

Is this any serious trouble? or is this something that i can handle following your instructions in this forum. Thanks to all advisors and help in advance.

2007-04-03 07:31:04 · 6 answers · asked by Anonymous

because it doesn't start automatically, it says "insert a disc" when there's one already in there. Help!!! Do I need to uninstall my cd drive and try to re-install???? And if so, how do I do that? Thanks so much!

2007-04-03 07:18:44 · 7 answers · asked by Staci S 1

I knew the optical mouse. But I don't know the laser one and its benefits.

2007-04-03 05:07:23 · 8 answers · asked by Kitkat 1

so i bought a new hard drive, how would i go about installing it? im guessing i cant change it with the 1 currently in because all the window files required to run the computer is on it, or am i wrong? or if i added it as a second drive what i do for that? help me thanks

2007-04-03 05:02:19 · 14 answers · asked by lloydd 1

2007-04-03 04:59:05 · 9 answers · asked by Anonymous

why cannot l use ide 2??

2007-04-03 03:52:45 · 1 answers · asked by m.sh26 1

My mainboard has a "P4XFCU" written on it. It's already 4 years old. I recently reformatted the whole thing but unfortunately I could not find the mainboard/motherboard installer. So now, I can't hear any sound/music/audio from it...is there still hope for this problem?

2007-04-03 03:34:34 · 3 answers · asked by pretty smiley 5

If your hard drive is exposed to a fairly powerful magnet will it cause any information to be lost or perhaps even damage the drive.

2007-04-03 03:27:22 · 9 answers · asked by K M 2468 1

2007-04-02 18:59:03 · 3 answers · asked by smage 2

I've never heard of a computer doing this before, so I thought maybe it was a virus. I scanned my computer and nothing came up on it. Anyone know what could be the problem?

2007-04-02 15:48:22 · 4 answers · asked by Tim 1

2007-04-02 15:20:52 · 3 answers · asked by Steven S 1

I love Flight Simulator and have been using it since it was available for the Commodore 64. I now have a notebook computer with a dual core processor and 2 GB RAM that should be able to run Flight Simulator X, at least in the less-demanding modes. I have a Microsoft force-feedback USB stick that really works great, but it is practically bigger than the notebook! I have been searching the Internet for an hour trying to find a small portable joystick that I can use with the notebook, or at least something smaller than the full-sized Microsoft force feedback stick. Any gamers out there who have any suggestions? I find it difficult to run the simulator with the keyboard only.

2007-04-02 15:11:56 · 1 answers · asked by Anonymous