I built a computer and I put it together taking all ESD precautions. It turns on (all fans spin, hd spins up, cd-rom spins up) but the hard drive status light stays lit solid even though you can hear that the hard drive isn't under load. About a second after everything starts up it resets itself (like you pressed the reset button) and it will do that continously as long as it is powered on. Nothing shows up on the monitor and it doesnt give any POST beep codes. I checked everything to make sure it was compatible and it is. Here is a list of the things I have in it
Ecs PT890T-A Main Board
Intel Pentuim 4 630 Processor 3.0ghz with HT technology
4gb Kingston pc3200 DDR2 ram (max capacity)
320gb Seagate Barracuda 7200rpm 16 mb cache HD
ATI Radeon x550 PCI Express VGA Card
500w Switching PSU
I have tried different psu's, different cpu's, different hd's, unhooking the reset switch, reseating the ram, vga, cpu....nothing seems to work. Any advice would be greatly appreciated.
2007-09-14
00:30:46
·
7 answers
·
asked by
jesus184089
1