Computer Networking - March 2007

The problem appears to be with, 'Local Network Configuration Settings. This is causing problems between two separate computers. connected via Home Hub, by two ethernet cables.
I was told I was correct in the fact that, this should not happen when are both just typing.
This will be only, when downloading on one computer, will effect the other computers speed.

What happens is, both our computers makes the other computer, work slower. (In other words) Both people cannot work efficiently at the same time.

Has anyone got a solution into how I can reconfig settings, without damaging the Network totally. To enable us both to be able to work at home.

Please only advise if you know a great deal about computers.

2007-03-15 22:09:50 · 5 answers · asked by Anonymous

2007-03-15 19:59:39 · 7 answers · asked by esskaykhan 2

I will like to know what and how to have wireless internet upstairs in my house to one of my computers. So what equipment do i need.

Thank You

2007-03-15 19:22:42 · 8 answers · asked by miozaosder 1

I have SmartAX MT882 Router, I upgraded its firmware, but there occurred many problems after upgrading. Now I want to restore its original firmware. How can I do this?

2007-03-15 19:18:04 · 1 answers · asked by Sheikh Aatif 1

Do I need a router for KVM application. I fail to see how the switch would work without an ethernet cable.
A good link will help.. Thanks

2007-03-15 19:12:15 · 3 answers · asked by ? 3

VPN for both the client and host side

2007-03-15 19:09:32 · 2 answers · asked by xigler 2

is for my home computer....i've tryed..i've follow all the instructions....but i can't undestand what there's of wrong.....
for connect with the prepaied card should i have already another connection or can i do also if is the first time that i connect it?!?

thank's!!!
bye.....

2007-03-15 19:06:22 · 2 answers · asked by Anonymous

I have two laptops at home, different model. They both connect to the same router (linksys) and they both detect the signal and the status is connected. My problem is that one of the laptops that says connected, does not really connect. It gives me page cannot be displayed. I have the settings in automatically connect to the signal in range and it detects IP and DNS automatically. This laptop was working fine and I used my recovery CD to make sure the harware was properly installed. The problem persists. My other laptop is working just fine, with the same settings in place. Please help me figure it out.

2007-03-15 18:49:39 · 4 answers · asked by Lil 2

I want to plug in and setup to skype

2007-03-15 18:01:30 · 2 answers · asked by Mulu a 1

I love learning new things to do on my pc....
If anyone has any fun sites, clever programs, or things that they just find 'cool' then please share!
I would be very grateful!!!

2007-03-15 17:15:04 · 7 answers · asked by Peta G 2

CAN A LINKSYS ROUTER BE USED TO CONNECT MULTIPLE COMPUTERS TOGETHER???
WHAT IM TRYING TO DO IS CONNECT A ROUTER TO MY DESK TOP PC AND SHARE FILES WITH OTHER LAPTOPS WIRLESSLY????? IS THAT POSSABLE, IF YES WHAT ROUTER CAN I USE??? I DO NOT WANT A INTERNET CONNECTION.

2007-03-15 16:40:34 · 8 answers · asked by flbneon03 1

I have a PC in my home with a DSL modem (2Wire from AT&T) and I use it to wirelessly connect my laptop to the internet. Can I continue to use the wireless internet if I remove the PC completely?


Sorry I'm not very technology-savvy.

2007-03-15 15:22:34 · 6 answers · asked by Anonymous

How can I get it without having to call my isp?

2007-03-15 15:21:13 · 4 answers · asked by The Big Bean 3

I have a wireless network in my house, and I want to get a little bit more advanced than just using the internet from my laptop. Is there a way I can play music around my house from my computer? Could I hook it up to my TV? Could I start my coffee pot from my bed? If you have suggestions like that, could you please input, Thank You

2007-03-15 15:18:32 · 2 answers · asked by pscranton@sbcglobal.net 2

If I am on my laptop and someone tries to use their laptop or desktop in the house. I get kicked off the internet and no one can access the internet. On my laptop it say my connection is excellent. But no page can be displayed. Please help. I am not computer literate with this stuff. But can follow directions well.

2007-03-15 15:06:57 · 6 answers · asked by now_what 2

at my old job, we used to be able to send messages to other people on the network using the "run" command.... i cant remember exactly how to do it, but i think you had to know the name of each computer that you wanted to "chat" with.

2007-03-15 14:52:36 · 4 answers · asked by Anonymous

in lazymans term

2007-03-15 14:25:22 · 4 answers · asked by nelesme 1

want to hook up a wireless router and a usb to pc

2007-03-15 13:49:32 · 6 answers · asked by Ethan S 1

the price for 300 feet of cable is $55.00..
I need to figure out the price of 30 feet..

thnx

2007-03-15 13:37:05 · 6 answers · asked by Matthew David 4

What is the Price per Foot.. My boss has a 100Meter spool of ethernet.. He wanted me to find out what the goin rate is so he can sell me 30 feet..

If you konw a 100 meter spool is.. i will do the math and figure it out.. or
if you are so inclined.. and just want to tell me the price per foot.. i would insanely appreciate
thnx

2007-03-15 13:04:47 · 6 answers · asked by Matthew David 4

What can I do to solve this issue?? in a Proliant DL380 G5 server.

2007-03-15 12:30:55 · 3 answers · asked by Ramon 1

I have a "previously used" computer that still operates on Windows 98 and there are some programs that I can't use properly like Yahoo Messenger as it would on Windows XP. Suggestions are helpful.

2007-03-15 12:04:01 · 13 answers · asked by grumpyfiend 5

i have a wierless-B linksys router and i was told by linksys that vista does not support this router but they said there is stil a way to hook it up so it sends out a internet signal, i have a desktop computer and i want to send a wierless signal to my nintendo wii. does anyone know how i can do this?

2007-03-15 11:32:09 · 3 answers · asked by Anonymous

2007-03-15 11:26:01 · 7 answers · asked by Arial 1

Ok guys, here's the deal. I live and study in Germany, in a students' house and we are using a shared connection. There are 3 floors each with 12 rooms in the building. I noticed, that my Internet connection is quite slow at moments. I use regularly the website www.speedtest.net to check my internet speed. My average score is 450 kb/s . Sometimes it's ~ 200kb/s , sometimes it's 600kb/s and s.o. I went to my neighbour's room to check his speed on the same site, using the same server at the same time. We ran 3 tests in a row. The results were stunning for me : he got ~ 1.8mb/s and mine best was ~700kb/s. I decided it could be the LAN-cable. I changed it with his and the results were the same. Then I took my laptop to his room and used his telephone bush . The results were the same. So where could be the problem ? I doubt it it is a hardware problem . Maybe software ? I don't have additional firewalls installed, I'm using the one provided in Windows. I haven't changed any properties. So ?

2007-03-15 11:16:09 · 6 answers · asked by baroff2003 1

2007-03-15 11:05:22 · 3 answers · asked by sim o 1

2007-03-15 10:01:19 · 11 answers · asked by nagarjuna p 1

2007-03-15 09:59:40 · 11 answers · asked by nagarjuna p 1

2007-03-15 09:42:23 · 4 answers · asked by melissa 6

I talked to my internett provider and the internet seems to be good; but the router is bugging me.

The router only recognizes the first computer to be turned on and then i cannot access the computer through its normalip which should be 192.168.0.1. HELP!!!!!

2007-03-15 09:23:59 · 3 answers · asked by Anonymous