Computer Networking - February 2007

How do i make a network share folder ???

i have installed a router and network adaptor on teh computers that i want 2 set up share folder but how do i do this where do i start??? need help thanks

2007-02-26 04:17:13 · 4 answers · asked by Anonymous

I have my laptop connected to a wireless network. Last night when i turned my laptop on it couldnt find a wireless network available. This morning it connected just fine. What could have caused it to not connect? Didnt matter last night how close i got to the router still couldnt connect. I did try refreshing the networks List but never helped.

2007-02-26 04:05:13 · 10 answers · asked by earthgirl_1975 1

l'v a 3com adsl router connected to my pc the internet works fine through it , l've tried wireless netwoking it to another pc l get an excellent signal but all it says is acquiring ip adress, the dhcp is enabled, the firewall settings are correct, l can't manually enter an ip adress because that doesn't work either,the ethernet card in the second pc is an asus wlan card. has nybody got any ideas please

2007-02-26 03:42:24 · 2 answers · asked by paul k 1

Right, this question has probably been asked but I did not see a specific solution already listed. I have a main pc that works directly off the router, and a second pc that runs wirelessly via a belkin usb network adapter.

I now want to add my laptop to the network wirelessly using a pci card. I have tried to connect two machines wirelessly before but have found that this knocks the wireless connection out completely.

During my troubles, I have bought and tried three different pci cards including a 3com, Linksys and Sweex laptop network cards (still have these) Is there anything I can do to overcome this problem or is it a lost cause.

2007-02-26 03:28:58 · 5 answers · asked by zabeonline 4

2007-02-26 02:52:52 · 11 answers · asked by Mon 2

2007-02-26 02:41:12 · 6 answers · asked by ojsaccomplice 1

I have bt broadband on my laptop.I have an internal wireless adaptor what else do i need. Is there anything else to consider.
Dave

2007-02-26 02:37:17 · 10 answers · asked by DAVE M 1

I connected a Linksys WRT54GS wireless router to a Netgear dsl modem and connected to my laptop without a problem (without encryption).

Then I took the Linksys and my laptop to another location and connected to a Motorola dsl modem. The laptop was able to locate the wireless router in the list of wireless networks available, but could not connect to it, WHY?

Both times open connection was used (no encryption) and both modems were connected to internet provided as verified by a wired ethernet connection.

Any solution please?

2007-02-26 02:28:28 · 1 answers · asked by No_Fins 1

HI,I have a broadband modem and connected to internet(network 1).My ISP provide me a static Ipaddress.And also another location(network 2) I have the same with static IP address.If i want to access network 1 pc from netowrk 2 and also network 2 pc from network 1 what should I do?.It is possible via the static Ip address.
I need any VPN product.Otherwise broadband modem provide a VPN service.Please Give me the solution.

2007-02-26 02:20:27 · 3 answers · asked by Annadurai pillai 1

in cisco router 1751 has a problem that is not saved its running config into its nvram space.
and i have reset the router for password recovery purposes. now its going on ox2412 register.
if i restore again to its native states, is there any problem could come.
pls help..

thanks

2007-02-26 02:06:48 · 1 answers · asked by ramesh 2

diagram

2007-02-26 01:44:14 · 1 answers · asked by Anonymous

wel when i right click my network there is to connections the ethernet says 100mbps and the other i quess the isp box runs at 400mbps and ntl said they have upgraded me to 2mb internet?

2007-02-26 01:34:14 · 6 answers · asked by Ash T 1

the other day my computer got a virus, and i used some storng anti-virus programs i have to get rid of it . However i really never look at what the results of the scans are i just delete everything it brings up, well i somehow deleted what ever my computer uses to stay networked to our 4 other computers, how can i fix it or do i have to reinstal everything from scratch, is there a program that will fix this network problem, PS im using windows 2000

2007-02-26 01:32:35 · 1 answers · asked by armorefelix 1

I have people pc online dial up. My internet has been connecting and also disconnecting by itself. What can I check on a setting to keep this from happening? Thanks, Misty

2007-02-26 00:55:09 · 3 answers · asked by Anonymous

2007-02-26 00:08:16 · 3 answers · asked by erfanB 1

I just checked the Top 10, and Dr. House is quickly catching up to danuitti. I think that Dr. House is going to catch up. What do you think?

2007-02-25 23:51:24 · 4 answers · asked by Anonymous

2007-02-25 23:36:31 · 7 answers · asked by jigglymint 1

I have a web site and wish to know if FTP downloads it for editing

2007-02-25 23:24:57 · 4 answers · asked by Dilcia R 1

Hi all may i know what is wifi. in singapore if there is some area got wifi to access then is the name of the network . thls

2007-02-25 22:51:22 · 2 answers · asked by Anonymous

i am a student of A+ and networking so i want some intruction and about courses of networkin to make carer in networking

2007-02-25 22:14:34 · 1 answers · asked by bhashkar k 1

2007-02-25 22:06:38 · 8 answers · asked by Anonymous

allow clients to acess parts of an internal network normally inaccessible to people outside the company (answer should be in 8 letters)

2007-02-25 20:51:14 · 1 answers · asked by harish_21_blr 2

Hello all, I am trying to share my internet connection but i keep getting the same error - Error 123 the filename, Directory name or volume label syntax is incorrect. This happens everytime i goto network connections right click my connection, properties, advanced tab then ticking the box Allow other network users to use this connection. I have also noticed that in services the windows firewall/internet connection sharing (ICS) service is not started and when i select the option to start the service i get the same error!

Thanks for any help people can offer!

2007-02-25 20:32:47 · 2 answers · asked by phiber_optikuk 1

i want to buy one ip address for my own

2007-02-25 20:08:11 · 1 answers · asked by Anonymous

i.p filters?

2007-02-25 18:15:48 · 4 answers · asked by WhiteFuer 2

Im going to assume FTP.

But anyway, all I want to do is just be able to connect to a folder with a bunch of my crap/folders that I can upload and download from anytime?

Any programs to set it up with or?

Thanks,

Dominick

2007-02-25 17:51:48 · 8 answers · asked by Nick N 3

By the concept of a Thin Client`ed network, if the thin client does support the comunication protocol and have the minimum hardware (and bandwitch) necessary for processing it, supose, 16mb of ram, and 100 MHz processor, what does it matter if it has 64 ram/250Mhz, or 128 ram, 500MHz... ?

I've read about the minimum requirements of thin clients and they are low, but I still see mostly of them with many hardware configuration, and "much" more memory and processor that the number given as 'minimum'.

Does this affects its performance? (I'm not talking about boot-time, but regular use of the station).

2007-02-25 17:46:22 · 1 answers · asked by maguioneto 2

How can I stop people from cutting me of the net??

2007-02-25 17:36:58 · 5 answers · asked by Anonymous

What I have is: DSL coming into the house at one end. This goes into an ADSL modem, then into an ethernet hub and then is sent out via cat5 cable to two computers. One computer is in the same room as the modem and hub. The other computer is 3 rooms away connected via the cat5 cable.
From time to time I like to use my laptop in the other room, but do not need nor want the wireless conection, so I unplug my desktop and plug the laptop in.
QUESTION: can I split the connection in the other room to use the laptop and desktop at the same time? I have only one rj45 plug in the room. Is there like a 'Y' splitter that would. I understand the speed might be split.
I was thinking I could use another hub, but that does not work.
Any help or idea's. I do not want to have to pull another cat5 cable.
Thanks
MD

2007-02-25 15:37:18 · 5 answers · asked by Anonymous

I have just one RJ45 jack. I need to run an Ethernet and Phone connection thru this. Is there a multiplexer or other device that can let these coexist in 1 channel and then split it on the outside ?

2007-02-25 15:35:10 · 5 answers · asked by TheAshMan 2