Maintenance & Repairs - November 2006

2006-11-06 06:56:23 · 5 answers · asked by Nico G 1

2006-11-06 06:49:26 · 2 answers · asked by lrussell333@sbcglobal.net 1

Does anyone know what would cause the rear camber to be so far off in a 2000 Regal. The wheels are leaning inward some and its wearing out the inner tread on the tires pretty fast. I'm afraid to take it in for an alignment because they'll probably want to fix hundreds of dollars of stuff when in actuality there isn't a whole lot to replace other than tie rods. Is there a way to adjust it myself so it's at least closer to being right than it is now.

2006-11-06 06:47:26 · 6 answers · asked by bizzie 2

2006-11-06 06:43:16 · 3 answers · asked by William B 1

Bought new from dealer in 2000 (W reg.), had all services at regular intervals and MOTs. Only 37,000 miles on clock. Was never advised that timing belt should be renewed when car was 5 years old. Now it has snapped and will cost well over £1k to repair.
Have I got grounds for redress from Renault ?

2006-11-06 06:40:39 · 3 answers · asked by Sue B 1

I mean how the gear system is connented tothe engine,how it increases the speed th car and also a cross section the gear system.

2006-11-06 06:32:50 · 7 answers · asked by mbechisky2000 1

2006-11-06 06:28:58 · 8 answers · asked by Anonymous

Where can I find '99 Toyota Corolla Windshield Washer fluid tank (bottle) and the motor? I went to a Toyota dealer here in Kentucky USA and was told the bottle alone is $ 114.00.... and adding in the cost of the motor would bring the total cost to $198.00 plus sales tax. This is just the parts....I am going to install it myself.

Anywhere on the internet I can get it cheaper? Also I am looking around local junkyards.

These things are missing because I bought this car 3 months ago. Prior to when I bought it, it had minor front end damage which was repaired.......when the bumper, headlights, grille, and windshield washer bottle and motor was removed and repairs were done, apparently the body shop guys did not put the windshield washer bottle and motor back in the car, and the body shop that did the work says they don't know where those things are. Yes, I realize these parts may have been damaged beyond repair.

2006-11-06 05:58:18 · 3 answers · asked by JustPeachy !!! 5

I bought a 1989 535i. previous owner replaced coil pack and fried comp.. I replaced the comp, everything works but the car will still not start. What else could be wrong? What else needs to be checked?

2006-11-06 05:48:38 · 3 answers · asked by Beth 1

The check gauges light comes on then the oil gauge reads 0 and then it started knocking. I checked oil and its at the full level.I changed my oil 2 months ago.I even just changed it when this started to happened and the oil was thick almost like sludge like. After doing so the knoking stoped and gauges were normal again. but the next day it started doing the same thing again.Can anybody help me?

2006-11-06 05:40:42 · 5 answers · asked by Anonymous

what is the hose that connects the air filter and up called? and that hose at the end is broken and how much does it cost and how can I fix the problem by my self? How does that broken hose affect the car performance?

2006-11-06 05:39:51 · 2 answers · asked by tmoney58 2

2006-11-06 05:35:58 · 17 answers · asked by daisydk77 1

2006-11-06 05:22:51 · 5 answers · asked by Sugar L 1

2006-11-06 05:15:51 · 7 answers · asked by Anonymous

2006-11-06 05:08:09 · 3 answers · asked by hth_wtf_st_louis 2

2006-11-06 05:06:01 · 7 answers · asked by rayb 1

has gas,has spark,just quite all of a sudden. new rotor cap, new rotor,and added plug wires after it would not start.wants to start but just dosnt make it. even starter fluid wont make it go any thoughts

2006-11-06 05:03:29 · 3 answers · asked by gary m 2

My front differential broke and I wanted to know if I drive it to the mechanics will that make it worst and how much should I pay to get it fixed? One mechanic told me only a ford dealer mechanic can fix it and it would cost about 3,000 dollars. Another mechanic told me he could fix it for 650 dollars. That's a great difference in price and don't know how much I should actually pay. I don't want to get ripped off and I also don't want a crappy job done either. Any advice will be greatly appreciated.

2006-11-06 04:46:39 · 7 answers · asked by sabrina n 1

http://img71.imageshack.us/img71/2079/picture75rm3.jpg

I have a 92 Sentra...ive done some engine mods n changed the appearance. I'd like to add graphics..something not too heavy..something light..wat color would go best with the blood red Sentra i have? N if you have any idea what else I should do to the car..please feel free n let me know. Currently, im changing the grill...n replacing it with a mesh grill.

2006-11-06 04:45:19 · 3 answers · asked by mahjongdong 3

2006-11-06 04:41:29 · 1 answers · asked by Anonymous

2006-11-06 04:41:21 · 5 answers · asked by morin36 1

I have an oil pan gasket problem, one day i went to the local store went in came out and i locked my keys in the truck with it running, i had to call my gf to come let me in which it took her an hour to get to me, mean while right before she came i noticed an oil puddle under the truck, luck for me she got to me in time, i was able to get it home with no problems, anyways i looked under the truck and found that the oil pan gasket had been pushed out from the front of the pan, i read my chilton and it said that the motor had to be pulled to put a new gasket in, i loosened a couple of bolts that i was able to reach and push the rubber gasket back in place and tightened it back up, my question is what would have made that gasket pop out like that ? and my warrenty will not cover the gasket, if i had to have it changed how much do you think it will cost, Thank you to everyone that replys,

2006-11-06 04:32:03 · 5 answers · asked by Anonymous

i have a1985 cadillac devl it is electronic

2006-11-06 04:17:50 · 6 answers · asked by Deborah C 1

2006-11-06 04:14:21 · 2 answers · asked by Anonymous

I brought a 2004 Suzuki Forenza, it only have 19,000 miles on it, its a great car I love it to death, but sometimes, not all the times when I accelerate, like coming onto a high way when I accelearate to pick up speed, there is this rattling nose that aggrovates me. Its not loud, but is noticable. It also does it sometime when Ive been driving for a while, I come to a stop, and when I accelerate I can here the rattling. Some people said it was something dealing with a heat sheild or something like that. But to any mechanics is there anything I can do to fix this minor problem that aggorvates me. If I dont fix this problem will it cause more damage???? Help please thanks

2006-11-06 04:03:17 · 6 answers · asked by big_d_45_2000 1

....pedal-to-the-floor symptom. The car will still stop but not like it should. Fluid in the master cyl is ok, found no leaks at the wheels or lines,. I adjusted the rear drum brakes but it made little difference. There is a power booster next to the master cyl. Any thoughts?

2006-11-06 03:42:11 · 7 answers · asked by Anonymous

I have a 1998 Saturn SL2. It starts up normal, sounds normal, no noise at all while in idle or while driving on road. Problem is that when I stop at a stop sign, or slow down to turn somewhere (store, or whatever) my RPM's drop to below 100. It usually sits just slightly above 100 in idle. I've already replaced the battery, just had the oil changed last week, checked spark plugs, wiring, etc. But for some reason, it continues to do this. It's at the point that I hate knowing I have to drive it to work (25 minutes away) in case in breaks down and I'm stuck at work.

Could it be as simple as a dirty fuel injector filter? Or is it my battery (which is only 6 months old and top of the line)? Again, there's no noise, car doesn't sound like it's laboring, just the RPMs drop way too low, almost to the point of conking out. More frustrating than anything and causing me concern since I need this car, especially as a single-mom with 2 kids.

Serious answers only please!!

2006-11-06 03:28:52 · 7 answers · asked by GirlinNB 6

2006-11-06 03:07:53 · 4 answers · asked by Jules 1

What tools are needed?

2006-11-06 02:30:44 · 4 answers · asked by sweetyenah 2

changed all the sensors and fuel pumps and filter" spark plugs to what do i do next?

2006-11-06 02:27:06 · 9 answers · asked by dizzy 1