Dodge

I really luv my car and I have alotta money invested in it and the owner before me had work done to the engine and the sludging problem was supposedly fixed and should never happen again.
But ppl keep telling me that it's BS and the motor is gonna blow up! So.........?

2007-11-23 04:52:05 · 6 answers · asked by Anonymous

I would also like to know the size of the plate.

2007-11-23 04:17:05 · 3 answers · asked by cluemisswalker 1

I just put a used motor in my truck

2007-11-23 02:09:50 · 5 answers · asked by Anonymous

It might help them to gain fans of the older muscle cars wouldn't it

2007-11-22 15:41:35 · 7 answers · asked by seshomaru202 2

i have a 2007 Dodge 2500 with a Cummins Diesel. Today my information display showed "Catalyst stat 96%" then it increased to 97%, 98% and on up to 100%. The truck still has full power, and is running fine. What does this mean?

2007-11-22 14:42:41 · 2 answers · asked by kidrck79 2

I have a 1984 Dodge D150 shortbed pickup with a 318/2 bbl. and the stock factory 4 speed trans (A833????) and a 3.23 rear end ...will one of the newer 4 speed automatic overdrive transmissions bolt in easily (or at all)? Any help is greatly appreciated. Thank you. Tom

2007-11-22 10:37:30 · 4 answers · asked by Tom F 1

2007-11-22 10:34:36 · 2 answers · asked by nick l 3

If it is pulling a high load, what is the remedy?

2007-11-22 06:38:26 · 2 answers · asked by EL PRESIDENTE/The Commission 1

I lost my main keys to my truck. I can use the replacement keys to get into the car but cannot start it. Does anyone know how to get my truck to start?

2007-11-21 10:50:56 · 8 answers · asked by B 2

oil pressure goes to 40 psi and holds for 10 min then drops to 0. can not find why it is doing this.

2007-11-21 06:18:37 · 5 answers · asked by Faye 1

2007-11-20 03:47:27 · 4 answers · asked by Anonymous

2007-11-19 14:05:23 · 5 answers · asked by Anonymous

I want to know what it would take to make a 2wd ram into a 4wd ram

2007-11-19 09:57:44 · 6 answers · asked by JustinBoutin 1

I am 17andI have a dodge 02 2500 diesel with 70,000 miles what do you think are cummins better than chevys?

2007-11-19 02:36:44 · 6 answers · asked by Andrew P 2

i dont even know if my car has high beams...i bought it used so it didnt come with any type of owners manual..

2007-11-18 13:30:20 · 6 answers · asked by beautifulchick 1

2007-11-18 09:21:29 · 4 answers · asked by LaFattai W 1

2000 Dodge Caravan 3.0L 2W
I had asked about this earlier. However, I have a new development since then, so I'm starting a new post because all I can do it edit the other, and not sure if the question would be noticed, by the already very helpful people.Ok, so here's the issue:
The heater does start to blow warmish air. However, if the engine is running you cannot use the defroster. As soon as you turn the knob to either the defost/mix or full defrost, for whatever reason it changes to air conditioning and starts to blow out freezing cold air. After investigating this, while on the phone with my dad who is a car guy, we assume it's a "fan"/valve. So what would be the name of the part I need to get replaced, where is it located? I've tried looking on Autozone.com and Oreilly's for a heater valve, and cannot find anything like that. Also, I should mention that when you switch the fan to the 4th notch only(right before full blast) it shuts everything off. Wiring bad?All other levelsfine

2007-11-17 16:34:06 · 5 answers · asked by Anonymous

like in a dodge ram they have that thing that says like you have 15 miles left in your tank

2007-11-17 09:43:18 · 6 answers · asked by C 2

My car is a 1992 Dodge Spirit, manual. If you step really hard on the gas while it is in drive it will move slightly. In reverse it won't move at all. The day before it would work but it would rev real high and then jerk ahead once it slipped into gear, now that doesn't even happen.

2007-11-17 00:52:16 · 5 answers · asked by desertmoonp 1

a 2006 dodge charger r/t r/t performence packeage (not daytona)

silver apaint, black bumble bee stripes,

keisler 6 speed manula tranmisson ( got used for only 950 bucks!!)


a cold air kit mopar headers with a flowmaster exhasut dual,

a chip, a comp cams cma kit .268 lobe

i have around 462 hp and around 489 ftlbs of torque

( is my step dads and gunna be mine when im 21 cureently drive a dakota and i haave a dodge magnum on the side that is primed and being painted black)


so is the 2006 r/t with asll these parts looks, and power a muscle car and its rwd despite it bieng a four door?

2007-11-16 14:45:36 · 12 answers · asked by Anonymous

It has about 105k miles on it. Some one told us it could be bad gas. But I don't know about that we tried some of that fuel stuff and it still does it some time.

2007-11-16 10:21:54 · 4 answers · asked by marhea_w 1

allright i just changed the stater because it was doing the same thing i described above and when i changed it,it started up fine and 2 weeks later its doing it again!! what do you think it could be?

2007-11-16 08:08:39 · 8 answers · asked by Zach H 1

2007-11-15 20:35:42 · 3 answers · asked by Gingerbreadman 1

2007-11-15 18:51:11 · 5 answers · asked by caboo312 1

I have just purchased a 2001 Dodge Ram 1500 regular cab, long bed pickup. It has a 5.2L and automatic, and also a factory tow package.
It has a 3.55:1 rear, trans cooler, bigger radiator, and oil cooler.
What is the maximum towing capacity for this truck? The manual states 7,800lbs. but the GCWR isn't high enough to support that claim.
I have a 31ft. travel trailer that I need to tow with it, the trailer weighs 6,300lbs fully loaded, and is a bumper pull.
The truck also has a Class IV hitch rated at 10,000lbs, and the truck already has an electric brake controller.
Thanks

2007-11-15 17:23:51 · 2 answers · asked by Anonymous

2007-11-14 18:56:07 · 6 answers · asked by princesspeach0606 1

if i go to a 354 r will it get better gas milage and will it change my speed odm and rpm gage?

2007-11-14 01:06:47 · 6 answers · asked by superdad0001 1

I am only getting about 13MPG/city. Is this normal for this Van? Dodge says it is supposed to get 18MPG. I know the factory numbers are always high, but you would think I'd get at least 16MPG.

The dealer just tells me the computer doesn't find anything wrong with the van.

2007-11-13 23:46:21 · 3 answers · asked by chronick 2

A friend need to know how the wires actualy go on the distributor ,we know the firing order but not what each position is on the distributor.

2007-11-13 21:26:01 · 2 answers · asked by little_whipped_mousey 5

ive got a 1970 charger and i have no idea how to remove the torsion bars. my 68 camaro friend and also my 57 bel air buddy have no idea how the torsion bars work. as well, i am new to them also. i am totally clueless as to how these come out. i am doing a whole rebuild and such, and i need them to come out.. but how?? i would GREATLY appreciate a step-by-step procedure on how they come out. i rip out my hair evertytime i get under the car and try to figure out how they freakin come out =/ i feel very stupid, becuase i have read somewhere that its an easy thing to do or something. but i'd really appreciate it. thanks alot everyone.

2007-11-13 21:16:55 · 5 answers · asked by blank 2