2007-11-20 03:47:27 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Dodge
The coolant level is good the blower only works on the high setting medium and low dont work
2007-11-20 04:03:38 · update #1
Its a blower motor resistor that typically causes that problem. I work for a Dodge dealer.
The part number is 68029175AA. List price is $16.45 and it takes about a half hour to install.
2007-11-20 04:04:03 · answer #1 · answered by IRON MIGUEL SANCHEZ 2 · 2⤊ 0⤋
you need a blower motor resistor on it that's what keeps the motor from burning up on it they mount usually on the heater box or right above it in under the hood,at a parts store the part will cost you about 20 bucks,and they only take a few minutes to install,then you,ll have all the speeds back for the heater that's a common part for dodges though and every few years you can expect to replace it,good luck on it.
2007-11-20 12:03:44 · answer #2 · answered by dodge man 7 · 1⤊ 0⤋
Yea man, it's the resistor and it's located under the hvac unit next to the blower motor . I believe it's held in by two screws.
2007-11-20 13:33:38 · answer #3 · answered by Jackolantern 7 · 2⤊ 0⤋
Low coolant levels can cause this...check them. If it started out gradual- sometimes working and sometimes not then I'd say its definitely the coolant.
2007-11-20 11:53:04 · answer #4 · answered by mark h 3 · 0⤊ 1⤋