Can u make a 1994-2001 dodge ram 4wd without changing chassis?

Question

I want to know what it would take to make a 2wd ram into a 4wd ram

Answer 1

yes you can but there's a lot of changing to do,especially on the chassis of it,you would need a complete vehicle to work from that had been a 4 wheel drive,a friend of mine did this and he wont ever do it again,he,s got more in that one than he could have bough one for,i tried to tell him,but it can be done,its just really expensive to do,and not worth it,good luck.

Answer 2

I would NOT recommend it--numerous frame components are needed for such a conversion, incl. crossmembers, steering systems, &c., even if what you want for suspension is multileaves at all corners. The 4x2 uses a K-member designed to carry twin double-wishbones and parallelogram steering; the 4x4 uses a simple C-beam crossmember in the same location. The 4x4 uses four leading arms, a track bar, and crossover steering (I have experience with this setup, being the mechanic on a 1998 BE2500 4x4).

Purchasing a built-for-the-job 4x4 is far more expedient than reconstructing a 4x2.

Answer 3

Your suppose to roll it a few feet forwards or backwards ,that helps aid in getting it in to gear much better,a car standing nonetheless is often tough to get in or out of four low,four high on the whole works higher also if the auto is in motion,it takes whilst to get use to utilising a circumvent 4 wheel pressure,but quite often they're the smoothest working ones there is,i possess four avert 4x4 trucks,and one chevy and my ward off goes in to apparatus so much less complicated then the chevy ever will,good luck.

Answer 4

you need a front axle off a 4wd truck [junkyard] a transfer case, and a front drive shaft and mounting hard wear for the transfer case

Answer 5

You would be better off buying a truck that's built 4w.

Answer 6

yes