Dodge

can you fit any engine to these cars ,an R/T 440 for example

2007-11-29 07:27:01 · 6 answers · asked by AndyM 1

I have been considering the Power Pak from Banks Engineering (with Compression brake), for my 99 Cummins 24 valve. With automatic tranny.
Does any one out there have any personal experience with this modification, and will it void the remaining engine waranty on my Deisel engine?

2007-11-29 04:02:29 · 3 answers · asked by majsnuff 1

I have a 2007 dodge charger rt and i noticed alot of people are getting these chips to so called add more power. My question is do the chips really give you horsepower and torque gains you can actually feel? If so, how much horsepower/ torque gain should you get?

2007-11-29 03:24:56 · 9 answers · asked by dwhip3166 1

I want to give my charger a cleaner look by removing the body side molding, but i don't no if it's a job i can do myself or if i have to take it to a bodyshop. If anybody has done this before, please give me some advice.

2007-11-29 02:19:39 · 4 answers · asked by Anonymous

Recently, not quite a month ago i bought an '01 Dodge Dakota with the 3.9L V6. Right now it has about 74,000 miles on it. I want to extend the life of this engine as far as possible, so switching to synthetic is something i have been looking into.

I have not reached the time for an oil change yet, so i can't say what was used previously (dino or syn). I've read that switching from dino to sythetic can cause oil seals to leak and/or make the truck use oil. What can you confirm on this?

If switching is my best bet, what do you recommend as far as brand and grade?

2007-11-28 10:29:00 · 6 answers · asked by jcfchamp06 2

how do i recalibrate my speedo for bigger tires, i had 285/70/r17 i now got 35/12.5/r17

2007-11-28 09:53:11 · 11 answers · asked by calvin b 2

I bought a 1999 DODGE Ram 1500 4WD with a 3” lift, which had oversized tires on it. LT315/75/R16 on stock 16” Rims. The problem I have every time I turn, the wheel rubs on the inside frame and the wheel well, Intern tearing up the tires and the plastic wheel well. I like the meaty look and the height but I want to fix the problem. I want to put 18” rims on it and new tires. I know it’s got something to do with the offset and backspace of the rim and that’s what I do not understand. My question for you is what rim would you recommend and what size tire would you put on it or what backspace and offset I would need to fix the problem without loosing too much height? Or if I decided to keep my factory 16” what would you recamend?
Please post your answer or send it to me at da_spazzz@yahoo.com
THANK YOU
Ronnie………………………

2007-11-28 07:38:19 · 4 answers · asked by Ronald H 1

and what is the orientation of the fuel tank filler tube?
thanks in advance

2007-11-28 05:43:15 · 5 answers · asked by BOX 4

I need to know how the air cleaner is to be attached to the motor, and how do you change the block heater. 1998 Plymouth Neon, 2.0

2007-11-28 04:19:51 · 2 answers · asked by Hangon H 1

2007-11-27 11:32:50 · 3 answers · asked by Ron I 1

it is getting spark and plenty of fuel

2007-11-27 11:19:55 · 5 answers · asked by bmosher1985 1

truck pulls to the right when driving & braking but had front end checked and numbers are where they should be , what else would cause this problem on a 97 ram 1500 - would like to hear what dodge man has to say about this . thank you in advance

2007-11-27 04:33:59 · 10 answers · asked by mac227@sbcglobal.net 3

2007-11-26 12:25:20 · 7 answers · asked by cumminsman1994 1

where can i learn how to remove dash board of a 1995 dodge pickup

2007-11-26 04:24:14 · 4 answers · asked by Robin R 2

Specifically I need one that will fit a 1975 Dodge Powerwagon, but these things were pretty much in every Mopar vehicle in the 70's.

Where can I buy one online (other than the link below)?

Seen here:

http://moparsbycrane.com/store/image/gguj/ELECTRICAL_PARTS_Mopar_Firewall_Junction_Box_w_Plug_Ins.jpg

http://moparsbycrane.com/?mainURL=%2Fstore%2Fitem%2Fgguj%2FELECTRICAL_PARTS%2FMopar_Firewall_Junction_Box_w_Plug_Ins.html%3Fitem_id%3Dgguj

2007-11-25 18:03:58 · 5 answers · asked by Jeff 2

2007-11-25 15:32:39 · 2 answers · asked by tntprec@sbcglobal.net 1

2007-11-25 15:02:33 · 5 answers · asked by Anonymous

I have checked the fuse box in the trunk area also under the hood. I can not locate the fuse to light up and see my odometer reading anymore.

2007-11-25 12:03:42 · 6 answers · asked by Mike 1

2007-11-25 10:11:09 · 2 answers · asked by Ron I 1

2007-11-25 07:03:51 · 4 answers · asked by scentless_apprentice02 5

2007-11-24 18:06:55 · 15 answers · asked by DaKidWonder 2

Near the rear view mirror is a screen that displays the outdoor temp and the gas milage. One day the display went blank and I haven't been able to use it since. I assumed it's a faulty fuse so I checked the fuse box and there's nothing listed there for the display? Does anyone know if it is a fuse and if so, which one do I replace? If not, any ideas on what the problem is?

2007-11-24 14:31:11 · 3 answers · asked by engine_fifty_one 1

I just bought a 1994 1500 series ram 4x4 with a 5.2 318.

Truck was running excellent and all of sudden it just wants to die when I depress the accelerator.There is a hissing noise coming from around the upper intake.I looked for faulty vacuum hoses and unplugged the Coolant temp sensor but no better.

I didnt check the EGR valve yet,or maybe on those they don't have one,I am used to Chevy trucks.

Some people have told me maybe the cat converter plugged up,and it blows air back towards the engine,causing the hissing sound.I didnt check for fault codes yet, the check engine light is not on,but it's on when I first turn the key so I know it's working.

This truck had the head overhauled not too long ago says the seller...

Any suggestions??

2007-11-24 13:02:37 · 5 answers · asked by Anonymous

2007-11-24 09:26:56 · 10 answers · asked by Daniel 1

I am 14 and i am looking forward to buying a Dodge Charger. How much am I looking at for one in mint condition?

2007-11-24 09:17:48 · 9 answers · asked by phrakshun 2

2007-11-24 04:27:03 · 8 answers · asked by Anonymous

2007-11-24 01:46:01 · 8 answers · asked by hottip4444 1

I wanted to replcace my EGR valve and I am not sure where it is located on my 95 Dodge Neon. Is this hard to replace and do you have any tips on how to do it. Thank you

2007-11-23 13:37:22 · 4 answers · asked by Anonymous

I already know about the cast ones from ats and bd! they are not what im looking for. thanks for any info!

2007-11-23 13:24:42 · 5 answers · asked by metzie69 1

Have a 1991 Dodge Daytona. Temperature gauge is all over the place--hot one second, and normal the next.

Important facts:

Car sat for two years. The "head" was replaced with a new one.

Oxygen sensor was recently replaced.

Has 210,000 miles.

Idles smoothly and accelerates fine.

Not sure if it could be a faulty mass air flow sensor, a thermostat, or something else.

What could cause this rapid temperature fluctuation?

2007-11-23 11:16:37 · 5 answers · asked by carputer1 1