I wanted to replcace my EGR valve and I am not sure where it is located on my 95 Dodge Neon. Is this hard to replace and do you have any tips on how to do it. Thank you
2007-11-23 13:37:22 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Dodge
it is on the driver side of the head, and the tube runs to the intake. remove 2 tube bolts, connector, vacuum line, and 2 egr valve to head bolts and remove. it is straightforward, but not all that easy to get on the bolt, and some times the threads will pull out of the aluminum from the heat.
2007-11-23 13:47:59 · answer #1 · answered by sprinkles 6 · 1⤊ 0⤋
it is on the driver side of your head there mey be some wires in your way but just have soome patience there are to 10 mm bolts holding it in make sur it is bad thetre a little pricey
2007-11-24 15:25:27 · answer #2 · answered by brian y 1 · 0⤊ 0⤋
It's located on the back of the head(drivers side). It's hard to get at because so much stuff is in you're way. If you are good at mechanics, you can do it. Need a good set of tools.
2007-11-24 12:46:01 · answer #3 · answered by Jackolantern 7 · 0⤊ 1⤋
Its disfunction could be due to a bad vacuum line.Check them all.
2007-11-24 02:51:43 · answer #4 · answered by (A) 7 · 0⤊ 0⤋