2007-11-27 11:32:50 · 3 answers · asked by Ron I 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
you have to remove the wheel and remove the brake caliper assembly then remove the large nut holding the axle in,then remove the hub and spindle ,this is a press on bearing,and will need to go to a shop from this point on,then the new bearing will press back in,be really careful about who presses this in the can break the hub assembly and then have to buy the whole thing,after that you replace everything like it came off,you really need a good repair manual on this one while your working on it,it will help you a lot on doing this,good luck on it.
2007-11-27 11:50:07 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
You really need to take it to a dealer. The inside race in the bearing is in two pieces and if you don't know what you are doing, you will separate the halves and could have a hard time with installing the new one. Dodge dealers have special tools just for the job.
2007-11-29 11:09:18 · answer #2 · answered by Jackolantern 7 · 0⤊ 0⤋
well its a bearing that has to be pressed out and the new one pressed back in....the spindle has to be removed and take it to a machine shop and they do the pressing in and out....
2007-11-27 19:38:15 · answer #3 · answered by blueman2 5 · 0⤊ 0⤋