Chrysler

IF i did an engine swap in my 1974 plymouth duster(318ci) with an engine out of an 79 trailduster(360ci), will my car have to then be smogged ??????

2007-09-29 09:11:11 · 5 answers · asked by PLYMOUTH DUSTYA 3

The bulbs have all been replaced and all fuses are good. What else can it be? We have heard of a brake light switch. What exactly does a brake light switch do? Where can we find one? And is that likely to be the problem?

2007-09-28 16:56:07 · 3 answers · asked by spielberg 3

2007-09-27 12:19:43 · 7 answers · asked by Anonymous

Not really even sure were the carburetor is in the engine compartment.

2007-09-27 05:20:58 · 7 answers · asked by Anonymous

I have a 1996 Plymouth Voyager that has 14" Wheels on it,
and the transmission is slipping. I recently purchased ANOTHER 1996 Voyager, but this one is a Grand SE model,
and the wheels on it are 15"....
I just had the front brakes done on the old voyager (14" wheels)
and the voyager I just purchased needs front brakes (15" wheels)
Do you think I should be able to use the same Brake Shoes?
I want to take parts of my original voyager to make one good vehicle, and Im wondering if I will be able to exchange the front brake Pads. ?
Or

2007-09-25 16:30:12 · 12 answers · asked by John P 3

2007-09-25 08:58:35 · 6 answers · asked by richard e 1

I own a 91 plymouth sundance 2.5 not turbo A/C has been takin out.My alternater belt keeps on breaking on me, last time it broke it took my power stering belt to.Pully is is good conditon.

2007-09-24 08:09:15 · 7 answers · asked by Anonymous

I have a 1998 Chrysler Town & Country. And both the air and recirc buttons are blinking at the same time. The recirc works but my air doesn't blow cold. I tried a calibration test and that hasn't seemed to help at all.

2007-09-23 16:38:39 · 4 answers · asked by BTP 1

2007-09-23 13:39:40 · 8 answers · asked by Bobzilla 1

I recently bought a 1993 Plymouth Grand Voyager but I can't find anywhere that says what kind of oil it takes. I don't have an owner's manual and it doesn't say on the engine.

2007-09-23 07:54:07 · 6 answers · asked by sblck14 2

2007-09-20 18:45:28 · 11 answers · asked by william 2

I know you wanna have em done around 90-100thousand k
and do the water pump while your in there.
You see many intrepids without engines for sale.
We just bought one off my cousin with 82thousand on it in TOTALLY MINT SHAPE. im gonna get the belt done soon.
I JUST WANT TO KNOW ANYONE WHOS OWENED ONE WHEN DID THE BELT SNAP OR WHEN THEY GENERALLY GO?

2007-09-19 07:19:51 · 6 answers · asked by Anonymous

2007-09-18 14:09:20 · 4 answers · asked by TOMMY D 1

Does any one have a 2002 or newer Chrysler Town and COuntry or a Dodge caravan that has plugged vents making the condensation leak into the car on the passanger side. Recently my car has been expieriencing these problem and Chrysler said this isn't a design defect. I was just wondering if anyone else was expieriencing this design defect.

2007-09-18 11:14:12 · 4 answers · asked by runner 2

I have a 92 Chrysler New Yorker Salon 3.3 liter V.6 with about 200,000 miles on it. Believe it or not it runs great (rebuilt engine) except for the fact that for about a yr and a half it been giving me transmission problems (of course). I got a transmission tune up about a yr ago and it made it a whole lot better but about a week ago I've been noticing the decline in performance again. My question is what am I looking at in the average cost on how much it would cost for me to have this done to my car being the make/model/year. All answers will be appreciated. Thanks!

2007-09-18 05:39:43 · 5 answers · asked by G-BOY 4

Why do people who Just happen to not like the vehicle you are trying to get fix, have to stick there opinion in about what you drive. "Well what do you expect from a piece of junk". Or go get a real car or truck. Or " It's a piece of crap".
I have driven a varriety of cars and trucks for over 50 years.Studabakers, General moters, Ford products, Chryslers, and had something to like in all of them. Today ALL auto makers are very competive and I wouldn't put one above the other. I have worked for Ford, Chevrolet, and retired from Chrysler/Dodge after 24 years, So naturaly I know more about Chrysler products than the others. But I would NOT say Chrysler is better OR the others are junk! SO all you nay sayers out there. If you don't like the vehicles these people are asking for help on, why don't you go to the catagory of vehicles you DO like and give THEM you're opinion? And stay there!

2007-09-18 05:37:02 · 9 answers · asked by Jackolantern 7

Hello,
Where would the flasher be in a 1993 Chrylser 5th Avenue be? I have no signal lights, they don't make a tick or anything that's why I'm thinking it's the flasher. Am I right? Oh, and when I do signal, they just stay lit on the back signal lights.

2007-09-17 14:47:01 · 10 answers · asked by hungryeyes001 4

I am back again about this darn car. So, I got new brakes, pads, rotors in June. 2 weeks ago I got new calipers and now I hear that rubbing again when I step on the brake. The person that fixed it heard the rubbing after he checked but can't find the problem.
I asked someone else and he said it's because of the after market pads, he said I should have factory pads.
The rest is just guessing now even thinking of wheel bearings, abs and I don't know what else. I don't believe those last 2 things. I was told the brakes were bled because that may have been doing it but it's still doing it.

2007-09-16 12:50:33 · 5 answers · asked by FieryDiva 2

Up until about 3 days ago, my window rolled up at a decent speed (its automatic). It rolls down just fine but it won't go up very fast and I'm afraid it will die, it's essential that this particular window works as I need to affix a parking permit on it. Is it the regulator or the motor that's going bad and roughly how much would it cost to replace it?

2007-09-16 02:02:47 · 4 answers · asked by carrie.bunnie 1

I heard some of these cars came with a rear anti sway bar? if im not mistaken the magnum(78,79) 300 and charger(77) was from that era came with this as an option can I get one from one of these cars and bolt it on? and what exactly does it bolt on too? I also have dual flowmasters running straight back over but bent over my rear axle will this get in the way of the sway bar install?

2007-09-15 17:58:42 · 4 answers · asked by hatinnicwhy 2

They make a whinning noise, especially when coming to a stop. I think it's only the automatics. I can be walking down the street and hear when one of these cars is near me. I've heard it on:

Caravan
Sebring Convt
sebring
Cirrus
Eclipse
Mirage

It makes the cars sound very cheap!

2007-09-14 14:44:59 · 6 answers · asked by J Rock 2

2007-09-14 11:22:43 · 5 answers · asked by crusiers2 1

It come on for no rhyme or reason. Doesn't matter if it's raining, dry, I'm driving or stopped. Obviously the parking brake is not on at all. Nothing I do makes it go away or prevents it from turning on.

My scantool shows no codes even when the brake light is on.

Is this a bad sensor? Maybe a problem with the computer?

Should I take it to the dealer, or would an independent shop be able to diagnose and fix this?

2007-09-13 14:15:52 · 7 answers · asked by rickined 2

I checked my fuel pump there are no leaks around it and I changed the fuel filter because sometimes after I start my car if i go close to the fuel pump/filter area i smell gas but there are no leaks.. Also a few weeks back i jacked up the rear of the car to look under it meaning the front was an inch aways from the ground and slanted and i saw gas leaking from the front of the car close to the fuel pump/filter area is there some sort of valve that releases excess fuel in the filter or pump because after that I couldnt make it leak again to find where it was leaking from..it was only a small leak that lasted a minute or so. I still cant find a leak till today but I do smell the faint smell of gas occasionally

2007-09-12 08:14:48 · 7 answers · asked by hatinnicwhy 2

what do you think of the town and country minivans and does anyone know what year they came out with power sliding doors?

2007-09-12 07:02:36 · 6 answers · asked by rebecca j 2

I needed some money quick and gas was getting to exspensive. So i sold my 66 plymouth furry I four dour car for $800. It used to be a texas state police car and had a 318 wedge engine in it. It also had front disk brakes on it witch i heard was rare but i dont knowif thats true. The body and interior was in good shape.

2007-09-11 20:21:16 · 1 answers · asked by mccabe27_m 2

the defrosters in my 1993 chrysler new yorker/ 5th avenue do not work. I changed the blower motor and the heat exchanger ,in the dash, and it still does not work. I was wondering is there a module or something that I am not aware of ?I also lost all the gauges in the dash,along with the auto door locks. All about the same time. any help would be appreciated.

2007-09-11 06:05:54 · 3 answers · asked by atctjt3 1

2007-09-10 09:01:22 · 5 answers · asked by bettyatherton 1

I am thinking of purchasing a used PT cruiser. I would like some imput back as to how others fill or what you know about this vehicle. Likes, disikes, good and bad qualities, etc.

2007-09-09 19:10:37 · 13 answers · asked by kitten 2

tranmission is not shifting to second gear

2007-09-09 14:01:24 · 6 answers · asked by gnice 1