English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Chrysler

[Selected]: All categories Cars & Transportation Car Makes Chrysler

2007-11-21 07:49:26 · 4 answers · asked by glenn c 1

Dont tell me to look in the manual or talk to the dealer. I WANT INFORMATION FROM PEOPLE WHOVE WORKED ON THESE CARS! ----- I Imagine Synthetic would be better for the transmission. But you can only drain 60% or so of the fluid & the rest is in the torque converter, so it is ok that it mixed with synthetic. What kind is good?

2007-11-20 07:22:06 · 9 answers · asked by Anonymous

does anyone know off hand how expensive this will be to fix or how long it will take? Its Tue today and need to go for thnksgiving

2007-11-20 00:34:31 · 4 answers · asked by Anonymous

I have a 1975 Plymouth Duster with a 3.7L automatic tranny. I have a speedometer cable that goes to some cylinder shaped thing then goes another cable goes to the tranny, does that mean I have cruise control?

2007-11-18 23:33:45 · 6 answers · asked by carguy 2

The emergency brake light in my mini-van turns on intermittently without the brake being engaged. I have tried releasing it many times but, the light stays on. It will turn off by its self every onces in a while, but will turn on again later. The brake is a pedal where the clutch would normally be, and the release is under the steering wheel to the left, if this helps you in anyway.

2007-11-18 09:33:54 · 6 answers · asked by Anonymous

Goodyear says it is discolored at 28000 miles. Can I just flush it by unhooking hose on bottom while pouring new fluid in and turning steering wheel til fluid is clean or is there a different procedure? Thanks
I dont want to damage it.

2007-11-16 14:54:45 · 3 answers · asked by nunya 2

i can't find out the reason..
it runs, it takes a while for it to get up to speed
it clunks when i put it in reverse

i've took it to several mechanics they have all said different things.

the last one said it has something to do with the electrical.
because he tried flashing the engine to reset everything, and that didn't work.

can someone help me find out whats wrong with it ?

2007-11-16 08:27:04 · 8 answers · asked by Jimmy F 2

04 Chrysler Sebring, cruise control light comes on when i start the car, but can be turned off by the switch, this just started happening yesterday, what could be causing the light to come on when i start the car?

2007-11-16 04:20:36 · 4 answers · asked by Anonymous

I put in my old CD and can't even open it without the funt prg. I have things saved on it, especially songs. I can't even open the CD without that prg.

2007-11-15 08:56:00 · 2 answers · asked by Joy B 1

PT Cruiser convertible, Pacifica crossover, Crossfire, and Magnum? http://www.caranddriver.com/carnews/14305/farewell-to-the-pt-cruiser-convertible-pacifica-crossfire-and-magnum.html I actually liked the cross fire.

2007-11-13 15:39:39 · 7 answers · asked by no name 4

I have a friend that says his brother has found a 73 plymouth duster with only 38,oooo miles on it.He claims that the car has a auotmatic floor shift from fsctory.He also claims that the car has no rust and that the car was garage kept and not driven in the winter.I was told that the car has a 318 c i d.I thought that the 318 cars were all colum shift not floor shift.I thought that you could get a 340 duster with a floor shift.I was also told that the car has a bench seat with the floor shift.Now am i being told something accurate or is someone pulling my leg?Any information anyone could give me would greatly appreciated.

2007-11-13 10:41:56 · 7 answers · asked by bigun67 2

Does anyone know what causes this?

2007-11-13 07:38:59 · 9 answers · asked by Gregory K 1

2007-11-12 11:57:35 · 4 answers · asked by Anonymous

My son-in-law was draining the old antifreeze from his Chrysler Town and Country 3.8L van. It was flowing very slowly so he tried backing (forcing) the plug out a little more, wahm ! it came out of the hole. It will not go back in.
We puchased a new plug, it goes in all the way and tightens, but, it won't stop the flow of water from coming out of the spigott. There is a good "O" ring on the new plug, it seems to go in too far though. It goes in with a twist, I can feel the thread grab, it follows all the way until tight...it loosens easily and could fall out with vibration. Someone help, please. Can I buy a metal plug for a better fit?

2007-11-12 09:45:24 · 3 answers · asked by peterngoodwin 6

i mean 02-03 things started getting better for the qualtiy of the auto's. Did they ever fix the problem with the engine's in the neon's stratus's,intrepid's,etc. Especially the 2.7L v6?

2007-11-11 13:05:05 · 7 answers · asked by topher4193 2

4

i have a 1992 chrysler new yorker the wipers will not turn on i changed the fuse it still will not come on my turn signals work and high beams come on what is wrong with my wipers

2007-11-11 10:25:57 · 4 answers · asked by lmiller1060 1

I'm looking at Chrysler 300 and I heard it shares some components with Mercedes-Benz, do you know exactly which components?
I'm looking for more technically-detailed answer please.

2007-11-11 08:12:39 · 5 answers · asked by mmd_774 2

I need to reset the radio after I got the battery changed. I have lost my owners manule. Any ideas on how to get a new manuel or reset the radio would be greatly appreciated.

2007-11-11 01:34:54 · 2 answers · asked by Anonymous

1974 PLYMOUTH DUSTER

2007-11-10 15:37:25 · 3 answers · asked by PLYMOUTH DUSTYA 3

the oxygen on bank 1, sensor 2 , says it is still bad. any help.

2007-11-10 03:46:42 · 8 answers · asked by Larry B 1

I have a 1988 Chrysler New Yorker.

2007-11-09 15:08:28 · 4 answers · asked by Anonymous

i have a 1997 chrysler sebring and i was wondering if i could put e85 gas in it

2007-11-09 14:13:43 · 7 answers · asked by paris_0129 1

the check engine light comes on after a few miles of driving and stays on until i shut off the car. then it will stay off and come back on after a few miles

2007-11-09 13:04:32 · 2 answers · asked by allan l 2

No heat thermastat,diverter valve, all hoses, complete flush,all vacume lines and related parts are new&properly routed. hot water does cirulate fully. I have the auto temp control . all sensers replaced. all listed has been done. a/c works fine when i slid the handle to blend in heat nothing happens. when i have heat only still nothing

2007-11-07 08:18:34 · 2 answers · asked by Karl 1

I have a 2001 Town & Country Mini Van that it making a loud rattling noise when I go over any size bumps in the road. I have some Ideas to what it could be but, was wondering if anyone knew about this type of van having issues with the front ends on them.

2007-11-06 16:18:45 · 4 answers · asked by Kristy J 1

I was wondering if anyone would know what was wrong with my 1989 plymouth horizon?The main sparkplug going to the ignition coil is sparking right where it attaches to the coil and cause a miss in the engine.I made sure the coil was properly grounded but the sparking goes from the main post on the coil to the secondary posts which causes the miss in the engine.The coil is new but cant understand why all the sparking???Thanks Paul

2007-11-05 12:38:22 · 8 answers · asked by paul t 1

put a cd player in a 94 plymouth acclaim? diagram? thank you

2007-11-05 11:23:30 · 1 answers · asked by matthew f 1

If i do not warm my car up every morn. cold or hot weather it start to vibrate about 70 mph and the rpms go really high while its doing this and then the check engine light pops on for a min and goes off and then it runs fine. Is it spark plugs, fuel, injector or worse case transmission?

2007-11-05 01:27:56 · 4 answers · asked by Anonymous

fedest.com, questions and answers