Cars & Transportation - 21 March 2007

The problem is not literally the clutch. It is more along the lines of the slave/master cylinders. Both are almost brand-new. When I let the clutch up just an inch, maybe less, I am already moving. Also, while I am driving I have a very difficult time shifting into the next gear. My slave cylinder doesn't seem to be engaging as much as it should. I have had this problem before, which is why I replaced the cylinders. I have bleed it, and then I completely emptied it and started over by filling it and pumping it full again.

What else should I do?

2007-03-21 12:14:39 · 9 answers · asked by dicanus1 2 in Maintenance & Repairs

The wiper should be intermittant but now it wipes continuously until it is shut off. When it stops, it will stop any where. I have inspected the motor and the internal switches and they are fine. The dealer suggested that the wiper switch on the steering column is faulty, but I don't buy it. There must be a relay somewhere which creates the intermittant action. I believe that this is stuck closed, but I can't find any relay!

2007-03-21 12:14:14 · 2 answers · asked by Zaphod 1 in Subaru

I wabt to take the governor off and the day time running lights can you tell me how?

2007-03-21 12:13:22 · 3 answers · asked by Josh H 1 in Maintenance & Repairs

2007-03-21 12:12:38 · 4 answers · asked by farmer boy 1 in Maintenance & Repairs

so far i have changed the cap and rotor, plugs and wires, fuel filter, oil change, new air filter and it still runs horrible. It only has 151,000 miles on it. It is very slow on acceleration and it guzzles gas only about 9 mpg. next im changeing the pcv valve and the oxygen sensor. Any ideas on why its running so bad or other things i could do to it. thanks

2007-03-21 12:11:42 · 4 answers · asked by Nick C 2 in Maintenance & Repairs

Can anything bad happen if I don't install an intercooler with my turbo?

2007-03-21 12:10:21 · 7 answers · asked by Kenny 3 in Maintenance & Repairs

My first guess as to what they stood for was Normal and Performance, but I can't really tell any difference in the car's performance or shifting either way. Is there an advantage to using one setting over the other that I'm just not noticing?

2007-03-21 12:10:11 · 3 answers · asked by Mooch 4 in GMC

anyone know any step by step instructions on changing a starter on a 91 explorer?

2007-03-21 12:10:08 · 2 answers · asked by Loved_by_the_Best 1 in Maintenance & Repairs

I have a 93 aerostar 3.0 engine and I've gone thru many problems, it just stopped running and will turn over but not start.
I've been bouncing around error codes.
started with 64-IAT indicated 123 C (254 F) I circuit grounded.
replaced sensor retested and got
114-IAT sensor out of range - IAT and
116-Engine Coolant (ECT) sensor out of range - ECT
tracked down a problem with the ignition control module and replaced that, still not starting, retested and got error code
543-Fuel pump monitor circuit shows no power - Power / Fuel Pump Circuits
I can hear the pump running when I turn the key and I am not receiving any other codes other than 543 this code did not come up until replacing everything else
any ideas
Thanks
R

2007-03-21 12:06:29 · 2 answers · asked by stikclik 1 in Maintenance & Repairs

those ones like auto mart or car trader or something like that where I can put in where I live and how much i'm looking for!!

2007-03-21 12:04:20 · 4 answers · asked by GCTA 4 in Buying & Selling

2007-03-21 11:59:50 · 4 answers · asked by Anonymous in Maintenance & Repairs

yeah it's me again...

I'm interested in painting my Element because I'm tired of it looking like every 10th car I see on the road. Have you seen anyone paint an Element and paint the plastic panels too? I would want it all one color (the gun metal or charcoal color), but how does it look if you paint the plastic too? Anyone have pics?

Thanks in advance...

2007-03-21 11:57:57 · 2 answers · asked by Bret G 2 in Honda

What makes are good and what makes should you avoid. I'm looking for something in the 2002 - 2004 range. Any suggestions?

2007-03-21 11:55:33 · 3 answers · asked by Anonymous in Buying & Selling

I talked to my parents about letting me get my license but they think its too dangerous out there. I got the insurance covered and they trust me alot but they just don't think i have enough experience behind the wheel. I have told them that the driver's test to get your license is suppose to let you know if your ready to drive or not but they won't believe me. It's not that my parents don't trust me but they want me to be safe but i'm not sure how to show that. thanks

2007-03-21 11:54:35 · 8 answers · asked by Pam S 1 in Safety

new HEI mod pick up coil & ECM coil & wires ok replaced coil to distibuter wires EST wire good no shorts have power to injectors, reference wire good no shorts by pass wire good no shorts injector wire to ECM good no shorts
Have beat head against wall for two weeks help

2007-03-21 11:54:34 · 6 answers · asked by J L 2 in Maintenance & Repairs

2007-03-21 11:47:50 · 4 answers · asked by Anonymous in Buying & Selling

The one from Flightplan with Jodie Foster, does it really exist?

2007-03-21 11:45:38 · 15 answers · asked by Ëåíà À 1 in Aircraft

The brand new 17" whaeels and tires have been balanced twice and no change in vibration. Any help? It is a 1996 civic ex

2007-03-21 11:45:31 · 10 answers · asked by vtecsleeper 1 in Honda

I have a trade in that's worth about $2500 and all I need is a used bigger vehicle. I've tried a few places but my credit is too slow (or so they say). I'm getting a little frustrated because most people have no problem getting cars, no matter what their credit looks like. Anyone have any suggestions?

2007-03-21 11:44:11 · 8 answers · asked by TNP Girl 3 in Buying & Selling

I have 2 kids and I want good tires for my car, can anyone tell me what to buy?? I had CONTINETAL TIRES put on back in 2005 and now i need new ones agian, so I would not use that brand ever again.

2007-03-21 11:43:42 · 2 answers · asked by Anonymous in Maintenance & Repairs

2007-03-21 11:40:58 · 4 answers · asked by Onedrop 2 in Rail

ceramic or metallic?

2007-03-21 11:39:56 · 10 answers · asked by Conqi 5 in Maintenance & Repairs

There is no way to use all the money on my MetroCards, since $11 is not a multiple of $1.50. I have a bunch of cards with $1 left that are completely useless. Is there any way to redeem money for these cards?

2007-03-21 11:39:11 · 4 answers · asked by Anonymous in Rail

Wat are some performance mods to get this car to get up and go?

2007-03-21 11:38:13 · 6 answers · asked by Anonymous in Porsche

I just changed my oil about a week ago, changed air filter, and noticed that when I am on the highway, the Oil Pressure is about 70 PSI? Never seen it that high? suggestions on if its bad, and what to do???

2007-03-21 11:37:06 · 3 answers · asked by Russell O 1 in Maintenance & Repairs

2007-03-21 11:36:45 · 6 answers · asked by Anonymous in Boats & Boating

Applied for a duplicate title in MN for my motorcycle, as first one was lost. Want to know if there is any way to check where it is because the DMV said it would only take 7-10 days and it's been a month.

2007-03-21 11:36:39 · 3 answers · asked by Jennifer G 1 in Insurance & Registration

How hard would it be to throw on a turbo for a 944 auto?

2007-03-21 11:36:04 · 5 answers · asked by Anonymous in Porsche

2007-03-21 11:35:37 · 7 answers · asked by NAIM Y 1 in Aircraft

my 86' bronco has a striaght six, and i looking to put a bigger engine in it, and I'm wondering a friend of mine has a '75 bronco engine, which is a 302 what im wondering is would that old engine fit and work in my truck, and what type of transmission do i need to buy, do i need to buy a '75 transmission to go with it would it matter....and what things would i need to do differently if i need to at all, in order to install it? or can i install it normally like any other engine.

2007-03-21 11:30:45 · 2 answers · asked by Whitney D 1 in Maintenance & Repairs