Maintenance & Repairs - August 2007

2007-08-20 14:20:12 · 43 answers · asked by sph 3

I have a property that I plan to keep for 5-7 more years and then the buyers are going to destroy the buildings and rebuild new homes. The tenant in the big house gets the electric bill but there is a tiny house next door that uses some of the electricity. They are friends, but that may not always be the case. I was thinking that I would have a "submeter" if there is such a thing installed on the small house. Then the two tenants could divide the electric bill. Can I buy one of these things and do I need an electrician to install it? There isn't a lot of electricity going into the small house as there are only two 15 amp fuses.

2007-08-20 13:21:27 · 18 answers · asked by Anonymous

the model number is A-2251198-U12R30 or atleast i think it is it looks to be from the 50's or 60's if you need a picture just ask

2007-08-20 13:13:15 · 8 answers · asked by dwaegerle 1

2007-08-20 12:37:57 · 13 answers · asked by ShakeDatLaffyTaffy 2

Or at least make it less visable. I have a concreate floor that is stained brown. How can I get the marker off the floor? i tried finger nail polish but it started taking off the stain!

2007-08-20 12:23:46 · 243 answers · asked by Hannah R. 2

Well, its actually my friend's mower, but he said he thinks that it might have iol in the gas. What could cause this? how could i fix it? The only major thing i can think of is maybe a cracked cylinder but i dont know.

thnx
Gage

2007-08-20 12:20:57 · 7 answers · asked by mr.emosk8ter 1

I have a very old Elna super, I’ve used it for a few years and I’ve never had a manual. I re wound my bobbin like I’ve done for years, I put the new bobbin on the bobbin winder on top of the machine, push it to the right and loosen the wheel on the side of the machine to stop the needle from going up and down as I wind the bobbin, when I was done I put the bobbin winder back to the left but I couldn’t re tighten the wheel. If I step on the petal the outer wheel spins but the only way to move the needle it to manually turn the inner wheel, I’ve hade this problem before but I cant remember how to fix it, please help!

2007-08-20 12:12:18 · 3 answers · asked by dani b 1

I get rid of my old dryer because it take forever to dry my laundry and bought a brand new one. But it happens the same thing. Anyone know what wrong with my dryer? Or how much should it be if i call a technician to fix it. Thanks.

2007-08-20 12:06:15 · 9 answers · asked by chriskimber 1

My downspouts are intact, however I need to direct them away from my house. Going to trench a pvc pipe in ground leading from downspouts. Is there a heavy duty pvc? Will be trenching approx 2 ft deep. And what will I need to connect the downspout into the pvc?

2007-08-20 11:49:06 · 8 answers · asked by lala 3

2007-08-20 11:35:22 · 10 answers · asked by karlene b 1

I have 2 kinds of fuel, one for the edger and one for the mower. the edger fuel has gas and oil mix and the mower just has gas. my mom accidentally put the edger fuel in the mower and tried to run it like normal. I drained out the edger fuel the best I could and then put the right fuel in there but it wont start. what are some suggestions on the best way to solve this problem.

2007-08-20 11:12:56 · 4 answers · asked by Me 1

Our white GE Quitepower 2 dishwasher, door won't open. I can lift the handle all the way up and the dishwasher will stop running, but, I can't get the door to open. Any suggestions??? without calling someone out here to fix it???? Thank you in advance...( and please be precise on how to fix it...hubby away..)

2007-08-20 10:19:22 · 5 answers · asked by ccj 1

there is alot and I mean alot of white like substances floating around in my above ground pool that looks like white skin, you know kind of like toliet paper shreds if there is anyone out there who can help me with this I would surely appreciate it. I have put bags of shock in it, algaecide,water clarifier, and doubled up on my chlorine. If there is something I have not done please let me know

2007-08-20 10:02:47 · 2 answers · asked by Amy 1

2400 psi....used to have to hold the gun with both hands now I just go along with one hand on the nozzle and it takes FOREVER to clean just the walkway and I have to practically touch the cement to get it really good. There is a white, green, red, and yellow attachment. The red works really well but is pin point (draw your name type) and would take a REALLY REALLY long time to do anything. Any suggestions. I'm obviously not very technical so I would appreciate detailed information please and Thank YOu Very Much!!!! Engine runs fine just little pressure.

2007-08-20 09:52:59 · 4 answers · asked by lemondrop 6

The power appears to be out and the control pad doesn't work, unless i turn a burner knob on. It buzzes for a moment and then the lights come on and flash 12:00. It allows me to set the time, push bake and even set the heat. But no heat in the burner or oven, and if I turn the burner knob off, the whole thing goes dead again. Help, it conveniently happened when the warranty expired.

2007-08-20 09:46:34 · 2 answers · asked by Anonymous

The water was leaking from my air conditioner and when I found out it was to late. The water actually got on the plug and the plug has a circuit breaker on it. Everytime I put it in the wall now it trips on its circuit breaker, not the socket here at our house. When it dries will it work again or will I have to buy a new air conditioner?

2007-08-20 09:35:51 · 5 answers · asked by racso329 1

2007-08-20 09:28:28 · 28 answers · asked by Anonymous

We live in a 46 unit 3 level condo unit. Our boiler room for heat has two boilers for hot water heat and two hot water heaters.
Does this room need an intake fan to bring in fresh outside air and should it be running 24 hours a week and 52 weeks a year.

2007-08-20 09:28:15 · 4 answers · asked by dennis h 2

Hi. I have a 25 year old Shop-Vac that emits a horrible plastic-smelling smoke when it's running. Also, if you look into the vents on the top of it, I can see a large greenish arc coming from the inside of it. My assumption is that due to the age the motor is finally giving out on it. I'm afraid to use it because I'm afraid further use might cause it to catch fire. I had to rent one a new one to finish the job I had to do. Any info on what might be wrong?

2007-08-20 08:37:09 · 8 answers · asked by Hghg 3

I have some scratches on my glasses. What is the cheapest and easiest way to fix this? Anything on Amazon?

2007-08-20 08:08:49 · 3 answers · asked by V for V 2

Last night I pulled a load out of my dryer after drying them. I switched my wet clothes from the wash into the dryer, and it all of a sudden wouldn't turn on. It makes no noise whatsoever. I flipped the breaker twice, and still nothing. What could be wrong?

2007-08-20 08:07:34 · 6 answers · asked by i_rock_my_knee_high_socks 1

The roof on my dad's back room has been leaking pretty badly for about two years. He's put tarps on the roof itself and on the ceiling, but that no longer stops the leak. The extension's roof is flat and shingled. At this point the water damage is so bad the ceiling beams are exposed. He hasn't called a roofer because he's on a fixed income and is terrified of the costs. Anyone have any alternatives to offer? Thank you!

2007-08-20 07:56:51 · 3 answers · asked by brownieleslie 3

My boyfriend had some friends over and someone kicked the door when it was locked, so the side where the doorknob is all busted. I heard wood putty is best for fixing holes in the doors but that would be hard to do since the hole where the doorknob goes through is all busted as well. What would be the best way to fix it without buying a whole new door? Thanks for the help!

2007-08-20 07:44:41 · 2 answers · asked by Cali 1

is it more expensive than oil/gas/electric?

2007-08-20 07:29:22 · 2 answers · asked by Lazarus Cadaver 3

2007-08-20 06:42:52 · 4 answers · asked by donna p. 3

Asking for experienced answers - I live in Palm Beach Gardens in an apartment complex on the second floor.. I have a sliding glass door and numerous large windows.. just curious that if a hurricane does hit, do I need to take further precautions, or would my impact glass suffice (new to the area, will be first hurricane haha) Thanks!

2007-08-20 06:36:41 · 8 answers · asked by LilMissSuNsHiNe 1

i have a pressure washer and i am try to find someone who can help me its the blots that fasten the unloader to the pumps its says they are m6x60 size can anyone break this down to us size for me on the manual its say to use a 5mm socket on them ?

2007-08-20 05:45:01 · 3 answers · asked by hunter_tn4 1

Would the detector go off if my gas stove is leaking gas?
I think my stove might be leaking gas, but if it was wouldnt the alarm go off.

2007-08-20 05:07:51 · 6 answers · asked by No need to be rude people, dam 1

Two things were plugged into an outlet and all of a sudden stopped working. I flipped the switch in the fuse box but that outlet and the light in the room don't work now. Everything else in the house is fine. Is this fixable????

2007-08-20 05:07:15 · 4 answers · asked by ArcticFox19 2

I have a low flush cistern the valve is a torbuck! when the toilet finishes flushing the pipes under the floorboard go bang well thats what it sounds like or if I go into the bathroom just before it cuts off I hear it worse..Should I change the whole cistern in side the basin. ? should I contact the water board ? I am at my wits end now and would it help if I put in a new cistern ? Thank you

2007-08-20 05:00:53 · 4 answers · asked by Anonymous