Last night I pulled a load out of my dryer after drying them. I switched my wet clothes from the wash into the dryer, and it all of a sudden wouldn't turn on. It makes no noise whatsoever. I flipped the breaker twice, and still nothing. What could be wrong?
2007-08-20 08:07:34 · 6 answers · asked by i_rock_my_knee_high_socks 1 in Home & Garden ➔ Maintenance & Repairs
I checked to see if the door switch was working. It is still there and looks the same as before. I pushed it a few times and it still seemed normal. The plug is plugged in all the way, and there is no light switch that controls it.
2007-08-20 08:25:50 · update #1
Is it plugged in?
2007-08-20 08:13:11 · answer #1 · answered by Hex92 5 · 0⤊ 1⤋
It may be your door switch is shot. I had this go. Check for a broken tab, or see if your outlet is plugged in all the way, You can unhook this door switch, but you have to open the top of the dryer to do so. There really isn't much to a dryer.
2007-08-20 08:17:00 · answer #2 · answered by stellaM 2 · 0⤊ 0⤋
Is it plugged in, do you have a light switch in the area that controls the plug in?
Also, I believe most appliances have internal fuses as a safety measure. You might have blown this internal fuse.
Previous poster made a good point with the Door switch going bad too.
2007-08-20 08:17:03 · answer #3 · answered by Josh C 2 · 0⤊ 0⤋
Did you reset the timer? and push the start? possible it's a door switch as mentioned above
2007-08-20 08:25:01 · answer #4 · answered by MR. T. 6 · 0⤊ 0⤋
the dryer does one load and then the drum quits turning,is the problem the motor?
2007-08-20 10:29:22 · answer #5 · answered by dick s 1 · 0⤊ 0⤋
You dont have to guess. http://appliancequickfix.com/ can give you an easy rundown on what to check.
2007-08-20 12:14:23 · answer #6 · answered by Anonymous · 0⤊ 1⤋