Other - Hardware - November 2006

i already have a video card that came with the computer, but im gonna get a better one. What is already in the computer is a 64 Mb,so i want to know if i get another video will the memory stack?

for example, i get a 256 Mb card, will this and the 64 Mb stack so i would have 320Mb total? or does it not work that way?


if you think you can help further my email: edwarddinki@yahoo.com

2006-11-08 23:57:49 · 2 answers · asked by Edward D 2

I have an Adata 1GB flash disk and everytime i delete or paste files it won't because it says that it is write protected. I tried searching in the internet but i couldn't find answers. my flash drive doesn't hava a switch so dont tell me to turn off my switch..

please help me.. i need it in my schoolwork and i need to put important files in it.. tnx for the answers.

2006-11-08 23:55:12 · 5 answers · asked by Anonymous

Hi! - I have been searching the web for an answer to this one. My current chip is AMD Athlon 2000+. Am wondering whether to upgrade the chip on this motherboard or bite the bullet with a new mother board and cpu ?

2006-11-08 23:40:32 · 4 answers · asked by Anonymous

I think maybe it is just locked or something , How can I go about to unlock it. I have tried numlock. it did not work.

2006-11-08 23:10:59 · 3 answers · asked by velle_b 2

2006-11-08 23:02:06 · 7 answers · asked by Anonymous

this is all the information about my computer;s mother board plz tell me what to do i installed realtek ac;97 c media sis and many more plzz help me
FieldValue
Motherboard Properties
Motherboard ID05/23/2003-SiS-650GX-6A6IXE19C-00
Motherboard NameECS L4S5MG3/GX+

Front Side Bus Properties
Bus TypeIntel NetBurst
Bus Width64-bit
Real Clock100 MHz (QDR)
Effective Clock400 MHz
Bandwidth3200 MB/s

Chipset Bus Properties
Bus TypeSiS MuTIOL
Bus Width16-bit

Motherboard Physical Info
CPU Sockets/Slots1
Expansion Slots2 PCI, 1 AGP, 1 CNR
RAM Slots2 DIMM
Integrated DevicesAudio, Video, LAN
Form FactorMicro ATX
Motherboard Size220 mm x 240 mm
Motherboard ChipsetSiS650GX

Motherboard Manufacturer
Company NameElitegroup Computer Systems
Product Informationhttp://www.ecs.com.tw/ECSWeb/Products/ProductList.aspx?CategoryID=1&MenuID=16&LanID=0
BIOS Downloadhttp://www.ecs.com.tw/ECSWeb/Downloads/Category_Download.aspx?Categoryid=1

2006-11-08 18:57:11 · 5 answers · asked by nYc g@L 4

i have 2 hard drives and i want to wipe one clean and reload with ntfs instead of fat 32. do i have do delete everything one by one? or is there a way to wipe clean that would be easier/.

2006-11-08 16:11:15 · 6 answers · asked by stanyazfan 3

2006-11-08 15:04:09 · 7 answers · asked by cs 1

Is there a huge difference? Im deciding betwen these two for a gaming desktop and i need more knowledge on them before i make the buy:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1366622&sku=CP1-A64-4000%20E

VS

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1446877&CatId=1948

I see the price difference obviously but performance wise... is the difference THAT great?

2006-11-08 12:42:37 · 4 answers · asked by James M 2

Got opinions? SHare them. Both sites seem to do a bit of review changing (bad reviews with 5 star ratings on products, very generic great reviews on multiple items).

What're your experiences with them both?

2006-11-08 12:31:49 · 4 answers · asked by James M 2

2006-11-08 10:59:37 · 7 answers · asked by ymaro6 1

where and how do i save a dvd on my pc and how do i save somethimg to my hard drive

2006-11-08 10:32:36 · 9 answers · asked by allymac 3

I've installed an 80 gig hard disk. I can only see 34 gig. My computer tells me there is 78. something gig on the disk. I suspect there's an old partition that is stopping me getting to all the space . How do I free it up ? I've tried to format the disk from XP but it won't let me !

2006-11-08 10:16:17 · 8 answers · asked by Anonymous

Sometimes I play games and the vibrating becomes faster, its not a driver, the mouse, and I don't know if any of my computer components. I installed new RAM and thought that was it because it only started after that but I took it out to see what would happen and was just the same. Please let me know if you know how to fix this. Thanks.

2006-11-08 10:08:51 · 5 answers · asked by Camilo R 1

what can I do to speed it up? I've removed all temporary files

2006-11-08 08:45:23 · 13 answers · asked by returnofkarlos 2

sometimes explorer won't even open. I have to restart the PC to even get it to open. Other times (like now) it is slo-o--o-o-oow. I have defragged, cleaned files, etc. The other 2 computers in the house, still on IE6 are good as always.

2006-11-08 08:37:38 · 6 answers · asked by russfolks 1

Ive seen that site and all those pieces done in the hall of fame are amazing. I could do something like it, but i dont see how you can do that with a mouse. It seems inpossible. Is there some type of digital pen that you can get that acts like a mouse and will do that but give you the control of using a pen?
If not HOW!!! its impossible!

2006-11-08 06:51:45 · 1 answers · asked by Helios64 1

well i installed windows xp but i lost my sound driver cd and i dont know which sound card to install...... i have tried installing realtek c media .....my motherboard is pheonix technologies plz if u guys can help me plzzz do

2006-11-08 06:37:27 · 4 answers · asked by nYc g@L 4

My left Cntrl and right Cntrl keys are swapped around does anyone know how to fix this?

2006-11-08 05:18:45 · 7 answers · asked by matt151091 2

2006-11-08 04:39:18 · 7 answers · asked by Anonymous

I'm using Win X, and I've got a 250g SATA hard drive installed and plugged in, when I look in computer management>disk management - I can see it in the list. It's unallocated though, against my other drive which shows allocated and has blue bar on it, so any ideas?

Sure I did it once long time back, but forgot what I did.

2006-11-08 04:13:11 · 2 answers · asked by trmmvi 2

what happens if i connect a PCI-X 16x graphics card on an AGP 4x or 8x slot

2006-11-08 03:46:05 · 5 answers · asked by Anonymous

When i start my PC, all the components seems to work properly,
but i don't get any screen at monitor. Monitor's LED only blinks.

2006-11-08 03:42:17 · 7 answers · asked by Mr. vipin 1

Its a small laptop mouse with USB receiver. The batteries are inserted correctly and it lights up just fine. after putting the USB receiver into the USB port, I push the button on the mouse and hold it in,but nothing. I have tried pushing the button on the USB receiver, and still nothing.what do you suggest. Im on windows XP and the mouse is from hong kong-welcome ISO electronics shop

2006-11-08 02:16:22 · 10 answers · asked by Brendon B 2

2006-11-08 02:13:34 · 18 answers · asked by Anonymous

recently my pc beeps at startup and found out the IDE cable had failed, after getting a new power supply unit, anyone knows why the cables died?

i've been downloading much recently, could this be the cause?

2006-11-08 01:56:22 · 1 answers · asked by lantaliban 4

Missing ntldr help cant get pc on!!!?
turned my pc on as normal but didnt boot up came up missing ntldr it said press ctrl alt del to restart but didnt work any idea wot to do please help

Additional Details

22 minutes ago
im running windows xp and dont have a floppy disc in though i did leave my game in the cd rom ive take the disc out and tryed rebootin but nothin the only choice i have when bootin is f2 set up or f11 boot menu but wont do anything when pressin f8

2006-11-08 01:35:43 · 8 answers · asked by no1bubbles2003 2

Everytime I reset it, it still goes back an hour. This is getting old.

2006-11-08 01:09:07 · 5 answers · asked by Jarden Grey 2

But in mobilephones it is ABCDEF......Z but in computer keyboards it is ASDFG.... like that. Is there any logic in arranging the keys like this. If so, what is it?

2006-11-08 00:52:45 · 5 answers · asked by kk_epy 1

I am building a custom system, and i have a question about the SLI graphics card. I know what SLI does, but does the motherboard have to be sli ready even if the card has an SLI plug? I know that SLI go through the motherboard without the cord.

2006-11-08 00:28:34 · 2 answers · asked by Anonymous