Computer Networking - October 2007

2007-10-01 21:49:57 · 13 answers · asked by Anonymous

Need to be able to access global address book and my email, can finally move to a full linux machine and drop my window's partition if i can find it :)

2007-10-01 21:06:59 · 2 answers · asked by WhiteHat 6

and to change my channel... do i just simply change the channel inside the router or do i need to also change the channel on my devices somehow?

2007-10-01 17:07:03 · 3 answers · asked by jde2399 1

2007-10-01 16:20:20 · 2 answers · asked by Anonymous

I am running windows xp
I want to use the built in IIS
I have a router (but it can port foward)
I can use either POP3 or IMAP
I need to be able to recieve and send mail from my IP address (I do not have a registered domain name but I do have a static IP)

2007-10-01 13:07:19 · 3 answers · asked by ArcyQwerty 2

Ok I bought a Airlink101 AR525W router. I have cable internet. When installed the router correctly and stuff, the router is always restarting and I don't know why. So I returned it. My old router works fine, it is a D-Link DI-624 rev C. I bought a new router so then I can have a better wireless range since my wireless range for my D-Link DI-624 isn't as far as a few years back when I bought it.
So do you guys know what happened? Is it because I have Cable internet?
I'm know planning to buy a Airlink101 AR525W(again) and a Airlink101 AWLH5026. Do you think that combo will work fine?

2007-10-01 12:43:43 · 1 answers · asked by That dude that is cool/helpful 2

default,, now i dont know what is the default factory password.

2007-10-01 11:59:34 · 1 answers · asked by roopali b 3

2007-10-01 11:21:34 · 6 answers · asked by Anonymous

okay, my dad had a Dsl subscription (which was the most expensive on the list) 1037 kb or mb or whatevr (im no pro).. anyway now he subscribed to a lower one which is like 500 kb or mb ... were only like 3 people using it ,, does it make a difference?? the pc only uses 54 or something ..

also.. i use bit torrent. whenevr i download stuff.. my younger bro (world of warcraft addict) comes whining about how slow his game is due to my downloading.. does it really effect him.. and would it had he had the 1037 ;s . ... please give me answers!

2007-10-01 11:15:08 · 6 answers · asked by Dee'z 2

I have a belkin N router and Belkin N USB Adaptor. The Router is in my house on the ground floor and the laptop is in my Garden Offfice, 35metres from the router.The signal strength is very weak and seems just the same as my old G router.Belkin have been unable to tell me what configuration changes I should make to maximise the range.Has anyone similar experience? Am I unrealistic in expecting it to work over this distance?

2007-10-01 10:53:00 · 3 answers · asked by Trader Paul 1

What should I set my settings like these below to? MTU

Authentication Type : (Default : Auto)
Basic Rate : (Default : Default)
Transmission Rate : (Default : Auto)
CTS Protection Mode : (Default : Disable)
Frame Burst : (Default : Disable)
Beacon Interval : (Default : 100, Milliseconds, Range : 1 - 65535)
DTIM Interval : (Default : 1, Range : 1 - 255)
Fragmentation Threshold : (Default : 2346, Range : 256 - 2346)
RTS Threshold : (Default : 2347, Range : 0 - 2347)
AP Isolation

2007-10-01 08:46:02 · 1 answers · asked by Anonymous

2007-10-01 08:39:54 · 6 answers · asked by Anonymous

2007-10-01 08:28:20 · 5 answers · asked by kste831058 1

How do I open a port for my router.

2007-10-01 08:05:24 · 4 answers · asked by noname 2

I can pick up the signal which is very strong at my home. I can individually connect on my 3 computers but I would like to be able to network them as well (for the shared printer and folders). It seems that I can only connect to one network or the other and if I connect to the home network I don't have internet. Any ideas on how I could bridge thm together? Thanks!

2007-10-01 06:24:18 · 3 answers · asked by __Samiam 2

Yes, I live in Hull, and don't want to get ripped off by Kingston Communications. In fact, I'm prepared to pay over the odds to avoid KC's monopoly.

I'll take it down the electricity cable, via satellite, wireless, any way other than mildly accepting Karoo, because I feel so strongly about letting market forces operate.

If you can give me a good answer to this question, you deserve a medal.

2007-10-01 05:31:01 · 10 answers · asked by Zweiblumen 2

I have a physical LAN interface and a wireless LAN interface. Most of my work is done over the physical LAN and I'd like to use the wireless interface to stream Music. Is it possible to assign a specific NIC to Y!MJ?

2007-10-01 05:28:43 · 2 answers · asked by dumbuser 1

I am a final yr student.I need IEEE papers to do projects.
Can anyone suggest me.I am not a member of it.

2007-10-01 04:55:35 · 3 answers · asked by devisure 1

A NIC runs 10/100Mbps, a router at 100Mbps and a Hub at 10Mbps.

(a) Describe any incompatibilities with the three items of hardware.

(b) What device(s) would need to be changed to ensure all three network devices were compatible?

2007-10-01 04:45:07 · 3 answers · asked by Anonymous

The rounter is Actiontec. The other Desktop will be 3 floors up from where the router is located. Could you recommend a wireless card that would give me a good signal?

2007-10-01 02:28:52 · 1 answers · asked by Anonymous

I have an XP desktop computer which is about 7 years old now. It is still in good working condition but we have decided to upgrade to a newer system for our new office. So we want to make the old computer available for my sister to use in the old office and network it to our router as the main computer on the network. But the computer has no ethernet connection.

How would I go about getting a card so that we can create a wired connection to the router? I believe I would need an internal network card. Are these easy to install and set-up? I am a hardware beginner and have never fitted anything like that before. I have had a look on eBay and you can get them on there from people who are selling used parts.

2007-10-01 02:11:38 · 4 answers · asked by daggerchristof 1

Is it in seconds, megahertz, milliseconds or microbits.

2007-10-01 02:04:51 · 6 answers · asked by gmflash 1

2007-10-01 01:26:42 · 3 answers · asked by 3nl70b1 1

We have a large network of Lan Cables Connections are almost near 100 and we are a bit worry. Actually some of our users changes there IPS and computer names to select some other user who have a good speed. So how can we manage them a lot of errors occurs about IP Conflict do you know a good solution or some software to stop that Thanks

2007-10-01 00:50:49 · 5 answers · asked by Mr.Bilal_Akbar 2