Computer Networking - January 2007

I want to know what software is easy to use and manage the IP addresses of the computers that use my WI-FI also want to know how you can track what sites they have been on is there a software out there?

2007-01-03 12:27:16 · 1 answers · asked by jazjadaz 3

I am trying to connect to a Citrix server with OSX. When I connect without the router everything work fine. When I put the router in front of it. I can't connect.

2007-01-03 11:32:02 · 3 answers · asked by chicagoanswers 1

A quick 'yes' or 'no' will do..Thanks

2007-01-03 11:15:27 · 12 answers · asked by Anonymous

I recently acquired a laptop from a sibling, and it's worked great until a few weeks ago when I found I could no longer connect to the internet. By digging around, I found that my IP address is "invalid". I tried refreshing it, manually resetting it, and using command prompt to renew, but all I found was that I am unable to contact my DHCP. Help?!?
Also, I'm a technical dunce and my networking was all set up without my questionable input, so I have no idea what router I have, or where to look to find out. Can anyone walk me through without needing to spend hours on a phone waiting for tech support?

2007-01-03 10:55:44 · 4 answers · asked by Fluffy 4

Hi, Im trying to connect my xbox 360 to my wireless network, but i need to find out my wep key, I have a Belkin wireless-g router. Can somebody please help!

2007-01-03 10:45:31 · 2 answers · asked by Anonymous

We have a wireless network, but there is no coverage in certain parts of the building. We have BT Broadband, with a BT voyager modem & router. I thought it was possible to get a receiver/repeater (I don't know if they exist or what they are called) and put them in certain parts of the builing to expand the network. Does this exist?
Is this a good idea? and
Where can I buy such a thing?
Thanks a lot!

2007-01-03 10:30:44 · 4 answers · asked by aferrerb 1

2007-01-03 09:45:12 · 6 answers · asked by Anonymous

is there a way to get a free dial up connection without a checking account ? its just temp. until i get my cable bill payed off so i can get cable internet i dont have any internet connection right now and i do have access to a computer that has a cd burner on it with internet

2007-01-03 08:57:54 · 5 answers · asked by jrhodtex 2

how does a wireless router work?
how far away can my pc be from the router?

2007-01-03 08:48:57 · 5 answers · asked by nigel1 2

I have too modems, I have files on one modem I was to transfer to my other computer, I don't want to have to use a disk, if there a way to maybe put a USB cord (or anything else) into both of them and just send the files from one to the other?

I'm starting to hate having to switch over computers when I want to do certain things.

Thanks!

2007-01-03 07:13:10 · 6 answers · asked by Sierra S 1

what do I need for the second computer, are there any usb drives that can receive a wireless connection

2007-01-03 06:47:36 · 5 answers · asked by Allen 3

Hi
My HP Pvilion zt3000, running XP Home edition sometimes fails to connect to the router, which is also a local DHCP server.
It ALWAYS gets an IP (for example: 192.168.0.11) from the router (whose IP is: 192.168.0.1) but once in a while fails to access it.
The command: ping 192.168.0.1 fails!
Later, when the machine is rebooted - things are ok!
I had compared the output of "route print" when the router was unreachable and after rebooting, when the router had become accesible - but the output looks just the same.
Could some of you recommend on the next steps (except for formatting the harddrive and switching to Linux.....)?

Thanks for your help.
Shay

2007-01-03 06:31:17 · 5 answers · asked by Shay Z 1

I'm working on a friend's older desktop with PCI NIC, video card and a USB card. It's an older computer and my friend has never used the NIC. When he does plug the network cable in it establishes a connection (attempts to obtain an IP address through DHCP) but then errors saying "network cable unplugged". It cycles through this a few times and then the computer completely freezes. I've tried updating the NIC driver, switching cards in slots and assigning a static IP, all with no luck

Any thoughts as to a solution are appreciated.

2007-01-03 06:20:31 · 6 answers · asked by ljalg 2

im board and need a site to play on. no shooting ones.

2007-01-03 06:18:31 · 12 answers · asked by taffy_baby_2001 2

i am going to get sky broadband and i'm wondering about that^ because the phone line socket is on the ground floor and my pc on the first floor. no other pc to share connection with right now but might get a laptop in the future.

2007-01-03 06:13:52 · 5 answers · asked by ad2 2

when i try to configure a new vpn connection in win xp with sp2,after selecting new network connection >next>connect to the network from my work place>next>then the page is grey in colour and both(dailup&vpn )both are in disable mode.But when i select other three options iam able to configure the new connection.

2007-01-03 05:52:36 · 2 answers · asked by me 1

bus network

2007-01-03 05:45:19 · 5 answers · asked by Anonymous

i can not start the uniterruptible power supply service on my local computer. it say the ups is not configured correctly. how do i correct this problem

2007-01-03 05:44:06 · 1 answers · asked by steve s 2

I have a wireles hp 2700 printer and have set up a network to it and prints/scans etc fine. then i have a US Robotics 9110 router to connect to adsl. networked with it fine and can connect to net fine. if i open Wireless Network Connections to see all the connections it shows the printer and the router as seperate things. If i want to print then i have to disconnect from the router and connect to the printer network. then to go on net i have to reconnect to it again. surely i can connect to both at once??
Please help
\
THanks

2007-01-03 05:37:37 · 1 answers · asked by roguemat 2

I'm looking for a well linux supported wireless card. I need/want it to run under Puppy Linux, and primarily Knoppix-STD (Security Tools Distrobution). It also needs to support monitor mode because I want to use it with kismet, airsnort, and other network tools. Puppy Linux should not be a problem, because I could use ndiswrapper to make it work and I would only be using it for standard surfing, but Knoppix-STD is a whole new can of worms. Has anybody had good experience with a wireless card on Knoppix-STD?

2007-01-03 04:41:37 · 1 answers · asked by ll0renz 2

2007-01-03 03:57:56 · 27 answers · asked by ahcim18 1

I'm searching for a J2EE compatible software for factory PLC's, and we all know the software from the hardware manufacturers is not very good. They all seem to use propriatary data systems that don't communicate with anything else, and are nearly impossible to program. Those OPC systems use the DCOM, and that is impossible to use. Is there anything out there that isn't impossible to use?

2007-01-03 03:56:02 · 2 answers · asked by Steve C 7

2007-01-03 03:51:55 · 5 answers · asked by Linda B 1

I have 2 computers at my home. The one I'm using now is directly connected to a DSL via cable and no problems. The other is connected via wireless. The wireless connection has worked fine and no problem connecting to any sites at first. Now the wireless connection can't find www.yahoo.com. But no other problems?

2007-01-03 03:13:50 · 6 answers · asked by imight25705 2

Can you use a USB wireless adapter for PC or anything else to hook 360 to X-box live? Or does it have to be the $100 X box 360 model?

2007-01-03 03:03:04 · 1 answers · asked by Rebbew 2

I have a windows XP PC. I want my friend to access my PC from his PC using the SSH protocol with port 22. He has putty software. I dont know how to open my computers port to enable his PC to access mine.

2007-01-03 03:01:33 · 3 answers · asked by VINOD KRISHNA ANANTHANARAYANAN 2

what leads into what ports etc.....

2007-01-03 02:35:42 · 13 answers · asked by Les-Paul 3

2007-01-03 02:31:20 · 6 answers · asked by chameleon 1

2007-01-03 02:22:55 · 6 answers · asked by VINOD KRISHNA ANANTHANARAYANAN 2

2007-01-03 02:03:02 · 2 answers · asked by Lucky c 1