how can i use a usb printer on a wireless network. is there an adapter for ethernet?

Answer 1

The cheapest way to do this is to connect the printer to a computer, then use that computer as a host to share the printer over the network. How you do this varies depending on the host computer's operating system.

If you want to spend a little more money, you can get a print server, but for home use, there's probably no point.

Answer 2

The easiest way to do that is to install your printer to one computer in your wireless network and share it but the drawback of this is that the computer where you installed the printer should be turned on whenever someone will use the printer. But you still have an options;
1: Buy a Wireless Printer
2:If your router has ethernet port, Usually located at the back, Buy a Network Printer that uses ethernet port and connect it to the ethernet port of your wireless router using UTP cable preferably Cat5e Cross-over or straight-thru depending on the capabilities of your router.
3:Buy a new wireless router that has USB or Parallel port like what i have in the link below
http://www.amazon.com/D-Link-DI-824VUP-Wireless-Parallel-802-11g/dp/B0000CEPE6

So, its up to you to choose. Good luck.

Answer 3

You can pick up a wireless printer receiver at any local retail store. I go to Wal-Mart for computer products because they are cheap and for me, they have lasted since I purchased them.

Answer 4

you plug the printer inside a computer (prefferably host) and share the printer...

Answer 5

If you have a Server that stays on plug it to it and share it if do not you can share it one of your clients (computers)

Answer 6

Try these sites for the adapter...