Motorcycles - July 2007

My 100cc 4-stroke motorbike uses a conventional carburator with two adjustment screws on it, one for idle, and the other for air(?).

2007-07-25 02:05:49 · 4 answers · asked by Richy T 2

This is not a Harley bashing exersize, the subject just came up in a conversation the other day so I am curious. I know that some alloy wheels, hubs and swingarms have been made in Australia for the last twenty years.

2007-07-25 01:14:15 · 9 answers · asked by ozraibike 2

someone mentioned it and says to also add mush rice and egg yolk to the mixture, any ideas?

2007-07-24 22:26:04 · 8 answers · asked by sonny c 1

2007-07-24 20:36:11 · 3 answers · asked by Mark D 1

Last week I went to grocery store in my car. There was a parked Yamaha R6 in the parking lot. All around it were a bunch of shopping carts for no reason. A parking space is not the place you put your shopping carts, specifically around other people's vehicles (including bikes). I just want to know why people do that? I physically went over there and moved some of the carts out of the way, so when the dude came back to his bike he could get out.

2007-07-24 20:23:19 · 9 answers · asked by Star-Scream 2

how do I get them back to fac setting comp16 out & rebound12 out is fully seated. if turned out more by mistake,will it damage ????? ROB J thanks 4 answer earlyer

2007-07-24 18:15:00 · 2 answers · asked by swoogydew 1

2007-07-24 17:03:55 · 7 answers · asked by Kenneth M 3

The bike sat for 15 years in my dads garage. I thouroly cleaned the carbs and changed the plugs. the bike runs excellent until you get up arond 4500 rpm. When it starts acting up, it still acellerates, but its just real jerky (like runnig out of gas)?? I was told there must still be dirt in the fuel system. Any help on how to get it all out or other suggestions would be appreciated.

2007-07-24 14:22:23 · 6 answers · asked by David B 2

Is it true that Harley's are so hard to maintain becuase they vibrate so much when you ride them that a lot of nuts and bolts come loose? I am thinking of buying a Bike and I Love, Love, Love the Harley's but unfortunatly I don't have enough time to maintain a High Maintanience bike (I'm already restoring my Truck)

2007-07-24 13:15:08 · 13 answers · asked by JessicaJack 3

My brother has a 2007 Yamaha Raptor and I want to get a quad that will put up a good race!

2007-07-24 13:10:24 · 4 answers · asked by RYAN R 1

We're thinking of buying an after market seat - and would like to know if a gel seat is a good option. It's expensive and we want to make sure it's a good purchase. Thanks!

2007-07-24 12:32:30 · 4 answers · asked by Anonymous

i have a dynojet kit in it with just an after market pipe and i cant seem to get the jetting right on it. ive been messing with it for a few weeks now. right now it idols fine but spits and spudders as you accelerate. right now i have a 150 main jet, needle position is 3rd clip, and air screw 3.5 turns out. and help will be appreciated

2007-07-24 12:32:06 · 1 answers · asked by David 2

i have a yfz450 with a full curtis sparks exhaust and my header gets so hot that it gets orange and glows at night. i bought it this way and dont know wats wrong with it. anything would be really helpful thanx.

2007-07-24 10:21:28 · 6 answers · asked by Randy 1

Just bought a 2000 883 and it was in the rain yesterday. I drove it to the garage. This morning I tried to start it and no go. Initially the head light was on but when I hit the start button, I got a click/clunk (like a stuck starter motor). The headlight went off and the rest of the bike is dead. At the 30 amp breaker, if I remove the 4 fuses, I have 12 volts. Insterting any fuse and I lose the 12v, remove it and I get the 12V back. Any ideas would be great. Oh, it seems if I wait awhile I get the headlight back but the same deal repeats.

2007-07-24 10:03:55 · 7 answers · asked by tng 1

if you have what is the best story you have from going

2007-07-24 10:00:37 · 5 answers · asked by The Steve 3

The bike was running when we would spray a little startign fluid in it. but wouldnt stay runnign as the throttle was not hooked up. I got the new housing and got installed and now it will not do anythign but backfire really really bad. the bike rean great prior to this. it has fresh 92 gas and the plugs were new wehn the bike was parked. any ideas would be great i woudllove not to take the tank off if i can help it as it is full but.if i have to great.

2007-07-24 07:16:02 · 6 answers · asked by myfyn69 2

ok i want the largest lift possible for my arctic cat with out needing new axls. any 1 no any good ideas r websites?

2007-07-24 06:38:17 · 2 answers · asked by Anonymous

I got a ticket for driving it and they gave me a fine because i dont have a lisence...........

2007-07-24 06:23:51 · 5 answers · asked by stupidpeoplehater 2

I dropped the termination end inside the clutch lever. My clutch is now dangling, and I need a quick fix to get it to the shop, or a permanent fix. What can I use to jamb the clutch cable to the lever?

2007-07-24 04:52:23 · 4 answers · asked by Troy R 2

add to this list; practice hard braking------Put yourself in a position to be seen------look as far ahead as you can for danger-----be aware that counter-steering is the way you are turning ------try never to panic.

2007-07-24 04:34:13 · 30 answers · asked by Bob 5

Is Harley coming out with a larger engine than the 96 Twin Cam any time soon?

2007-07-24 04:25:49 · 4 answers · asked by thefowlkes 2

brands that provide decent protection would be perfect. How well will this equipment protect a rider in case of a crash or accident? So far I am considering boots, a helmet, pants and a jacket, but I don't know whether to go with or get something that is more like armor. Thank you very much for looking.

2007-07-24 03:07:38 · 14 answers · asked by Anonymous

I am planning to purchase a 1992 Suzuki GSX-R 600, the guy that is selling it said the electric starter does not work.

What is the difference between a kick start and electric start?

How much does a replacement usually cost?

Is installation difficult and expensive?

Is this a big problem?

I would appreciate advice and good info.

Thanx

2007-07-24 03:06:33 · 6 answers · asked by Anonymous

I have a primo terminator 150cc scooter, its an off brand from who knows where. It hase a single cylinder 4stroke engine and i replaced the piston head in it but i didnt look to see if there was any timing marks on the cam and chain so i dont want to put it together till i know. Any info and help would be greatly appreciated if you know if there is timing involved in a single cylinder.

2007-07-24 00:40:56 · 4 answers · asked by bullin82 1

What do you ride and why,give some idea of your climate ,and what country you live--this year I have 2000 Yamaha 1100 Classic --here in East Coast Canada ,14celcis out now at 12:15 AM

2007-07-23 15:46:57 · 16 answers · asked by hunter 6

what is the cc of a motorcycle? i saw like starting from 200cc to 1300cc. what is cc?

2007-07-23 15:44:31 · 11 answers · asked by >_> 4

2007-07-23 15:05:45 · 4 answers · asked by me 2

I'm 12 and I want to get a motor scooter for my birthday. My Daddy said you have to have a license to drive one. Is that true?

2007-07-23 13:15:55 · 9 answers · asked by Anonymous

2007-07-23 12:20:57 · 1 answers · asked by luke 1

2007-07-23 12:15:07 · 16 answers · asked by Anonymous