Maintenance & Repairs - May 2007

Mine seems to be quiet, then have more gas and a little louder. Not bad... just a off and on with the soft and then the louder sound? Nothing extreme

2007-05-12 13:50:47 · 7 answers · asked by Anonymous

goes on for a while then off for a while.. .is that a fluid level?

2007-05-12 13:49:15 · 9 answers · asked by Anonymous

I have a 1995 isuzu rodeo and when i came home today it started smoking from under the hood?what cause it to smoke?thermostat?I do have a slight coolant leak but i don't think i was low

2007-05-12 13:25:52 · 5 answers · asked by SilentCivilian 1

2007-05-12 13:17:15 · 7 answers · asked by nonnynonny2000 1

can i use a toothbrush with bleach or how do i clean it with out taking it to a car detail place

2007-05-12 13:05:27 · 7 answers · asked by augy 1

2007-05-12 12:44:41 · 3 answers · asked by runner1 6

2007-05-12 12:31:35 · 12 answers · asked by masrbobo 1

there seems to be some kind of hold on the button that holds the bracket to the mirror as it wont allow me to remove it.

im trying to use a kit to get the mirror mounted again but first,the button needs to be separated from the mirror. anyone have any help about getting it off?

2007-05-12 11:59:29 · 5 answers · asked by skizzie72 3

but there is no hubcap!! any ideas as to what that might be?

2007-05-12 11:59:14 · 3 answers · asked by Weezy J 3

how tight are the rocker arms in your cars engine supposed to be tightened down? 1 or 2 of mine are loose and making a tapping sound but i dunno how much to tighten them. It is an 84 chevy S-10 2.8L / 173Ci V6

2007-05-12 11:41:21 · 2 answers · asked by trivium332 2

I took my truck up to Autozone and the guy hooked the handheld-electronic computer up to it and told me the EGR Flow was off. Well, i was wondering if it's a necessity that i have to have or if i can just drive around with it being that way and not have to replace it.

2007-05-12 11:29:12 · 4 answers · asked by car20015 1

i have a 91 ford and it runs good tell it gets hot then i have 2 shot it down for a minn then i can drive it for a lil bit then it dos then same thing can anyone halp me

2007-05-12 11:09:16 · 4 answers · asked by JR w 1

My power drivers seat has stopped working. All functions have stopped which makes me think it is a fuse, but I can't find a fuse for the front seat. The passenger power seat still functions.

Has anyone had this problem? (Do you know how to fix?)

2007-05-12 11:07:17 · 3 answers · asked by Anonymous

I hooked up cables wrong when I first tried jump starting it-then I bought a new battery and it starts fine but now it won't idle. What could have been damaged when I hooked up the cable backwards?

2007-05-12 10:48:24 · 7 answers · asked by Michele 2

2007-05-12 10:40:18 · 7 answers · asked by melmel23 1

I have a 1994 firebird auto trans. When i first start to drive it, it is very sluggish, but if i put it into first instead of drive it does fine. The transmission was recently serviced, the fluid is clean and full. Any ideas what might be causing the problem, and how to fix it?

2007-05-12 10:36:29 · 3 answers · asked by Anonymous

2007-05-12 10:21:01 · 15 answers · asked by Anonymous

A car is being given away by one of my dad's co-workers as he does not want to deal with the problem its engine is experiencing. Either cylinder 1 or 4 (far right looking down at the engine under the hood) has absolutely no compression. All other cylinders peak at a beautiful 150 pounds of compression. I have read a TSB about sticking rings in this engine, and supposedly the car was burning about a quart of oil every 1000 miles. Could I remedy this by using the method I've read about where the cylinder is filled with heavy weight oil through the spark plug hole and then cranked to "reseat and reseal" the rings? Secondly, other than a serious mechanical defect what causes absolute zero compression other than a ring problem.. As a side-note I would like to add that the radiator had been covered with cardboard in the winter as if the thermostat is possibly bad...maybe the car ran too rich and fuel-washed the cylinders? Please help! It's a FREE car!!! :( Or maybe it's not worth it..

2007-05-12 10:20:56 · 3 answers · asked by Logan U 2

2007-05-12 10:13:44 · 18 answers · asked by orpa920 3

a) will higher or lower pressure improve speed
b) will higher or lower pressure improve handling and cornering
c) overall for optimal speed and cornering which is better
-even(same) pressure in front and rear tires,
-lower pressure in front and higer pressure in rear tires
-higher pressure in front and lower pressure in rear tires

2007-05-12 09:46:46 · 2 answers · asked by Anonymous

sometimes the light flashes and the odometer shows a bunch of dashes and it will not start and other times it fires right up

2007-05-12 09:36:15 · 2 answers · asked by jamezroc76 2

2007-05-12 09:36:03 · 5 answers · asked by Anonymous

I bought a new set of letters from Dodge, they have a sticky backing, but I'm thinking I am supposed to apply some sort of epoxy to really get them to stick. Any suggestions?

2007-05-12 09:24:01 · 3 answers · asked by rd 1

is written on my original 105 amp alternator is "Delphi". If anyone can point me in the right direction, I would really appreciate it

2007-05-12 09:21:31 · 3 answers · asked by Anonymous

I am trying to refill with unleaded to dilute the mix continuously but can't get in more than 7 - 8 lltrs at a time though the tank must be half empty by now. What is happenning, or what has happenned? Is the diesel causing the petrol to froth as it goes in or what?

2007-05-12 09:20:21 · 11 answers · asked by fatducks 1

How can you check to see if a power window motor in a 88 silverado works while it is still in the door?

2007-05-12 08:36:55 · 4 answers · asked by Anonymous

OK so this is what I get for not paying attention.While reversing,I hit a pole that was painted yellow.So now the paint is on the back lower bumber.Theres no damage to the bumper as far as a big dent or anything just the paint from the pole is left on my car.How can I get this off?Ive heard about rubbing compound but am affraid to damage my car more.Is it expensive to have someone do it?

2007-05-12 08:34:51 · 6 answers · asked by rock_roll_musicman 2

I'm replacing my radio in my 2004 suburban. I have one wire plug that I can't get off. Can anyone help me?

2007-05-12 08:30:51 · 1 answers · asked by zodiac30 1

2007-05-12 08:28:46 · 3 answers · asked by franktrujillo_180 1

replacing the timing belt


do i have to put some oil or grease when replaicing the timing belt ?

thanks

2007-05-12 08:26:53 · 8 answers · asked by Anonymous